Use of the battery by app is no longer visible

Similar Questions

• Signal low iPhone in the use of the battery (6 apps with weak signal)

  Hello world

  I bought a second hand Iphone, it works fine but the battery runs out quickly when I use it (especially on safari). In the use of the battery, I see always weak signal under the apps and always under phone, even though I have 4/5 bar. I have yet found a solution...

  https://drive.Google.com/file/d/0B0aW-K-0VfulQW1LVVJCVHc0OW8/view?USP=sharing (here's a screenshot)

  Thank you in advance, I hope that your answers will help me.

  Hi luca9903,

  I see you are a new user here in the Apple Support communities - welcome! I hope we find you often contributing in the future.

  If you have short battery life when you are using your iPhone, you can use the information on this page to help extend - Batteries - maximize Performance - Apple

  Thank you for using communities of Apple Support.

  Sincerely.

• I have iOS 9.3.2 on my iPhone and I do not get a display indicating the use of the battery by apps

  

  Try restarting the iPhone: restart your iPhone, iPad or iPod touch - Apple Support

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• "No cell coverage" not listed in the use of the battery

  During the audit of the use of the battery parameters, on an iPad 2 Air, WiFi and cellular, upgrade 10.0.2, 'No cell coverage' is listed and uses a lot of battery percentage. This never happened since the purchase of the iPad two years ago. I've recently updated to iOS 10.0.2 and T-Mobile as the cellular carrier. This occurs when the two Wi - Fi AND cellular data are turned off. I barely use the cell service as it is, first of all just use wifi, and I never leave the cellular data connection on when you do not. I noticed a few days ago a T-Mobile "Carrier Update" has been pushed to the iPad. Someone else with the same situation?

  Hi there, stumped127! Thank you for using communities of support from Apple!

  Use of your iPad 2 Air indicates that it is looking for service even if you have data Wi - Fi and cell phone turned off after update to iOS 10.0.2. Given that mobile data is off, it shouldn't have an impact on the battery and I will be happy to help you with this. Be sure to test after each numbered step.

  How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. It is preferable "to have" one to the 'need' to a backup.

  1. forcing a nearby app on your iPhone, iPad or iPod touch - first, quit all running applications, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

  2. reset the iPad settings - do not forget to write your networks, Wi-Fi/passwords before you start. On your iPad, go to settings > general > reset > reset all settings. This step returns your iPad to factory default settings. Test and if that solves the problem, use your backup to restore your settings.

  Take care!

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• The blue selection point is no longer visible in the layer menu... It is more difficult to select the right object in the layer menu!

  The blue selection point is no longer visible. I have attached a screenshot with the place were the point should appear, but it doesn't.

  I don't know if I pressed any shortcut, maybe I did, but I can't find a way to get the blue dot!

  See replace your preferences

• Use of the battery is displayed

  For some reason any my battery usage ceased to show.

  Under the battery is said only: "battery information will be available after using the phone for a few minutes.

  I used the phone and still nothing.

  I tried reboot etc and still does not.

  For some reason any after recharge and leave it all day, it fixed itself. Weird cause I have not had this before, but anyway it works fine now.

• Questions about the use of the battery and power on the Satellite L30-134

  Hi all!
  I have again L30-134. The questions are:
  -May this work of his power without battery installed on the computer?
  -a this model to charge the battery in time to work on machine plagged to supply AC circuit?
  Kind regards
  Andrew.

  Hello

  -As you know, if the battery is faulty you can always use your laptop with AC power only. Answer is: YES.
  -Here, I agree with explanation s chain. The battery will be recharged but slower.

• Tecra 8200: flicker of brightness of the screen on the use of the battery

  I have a Tecra 8200 running Windows 2000 Pro. The problem is with the brightness of the screen flashes intermittently, all a few minutes when it's on battery. The Toshiba power saver utility seems to work OK. his answer seems to depend on remaining battery life, that is to say less than 50% there is no difference between 'normal' and 'long life' with regard to the brightness of the screen.
  Superior to 50% there is no difference between 'normal' and 'high power '. There is no problem at all when running on the current.

  Recently, I changed the battery; the original was a PA3062U-1 bar, but the news is a PA3062U-1BAT. Can that be a problem?

  Hello

  The new battery is the right specification for this model of computer Tecra laptop and on I think that the battery cannot be responsible for this.

  If you try what Tom suggested it please let us know about the results.

• Satellite A75-S206: question on the use of the battery

  Hello

  I just replaced my battery Satellite A75-S206.
  When I installed the battery, it fully charged.
  When I turned on the laptop, the battery light turns off and the laptop only works on a power supply of power.

  How can I change the setting and make work under voltage when it is plugged and on battery power when you are away the CAP?

  Thank you

  FAS

  The laptop is still running on the battery if the AC adapter is not connected.

  If you connect the AC adapter to the laptop then the laptop will automatically switch to power and the battery will be charged.

  Everything works automatically. Then you n t need to change the settings.

• HP PAVILION G6-1107TX: improving the use of the battery

  Hello

  I would like to know if it is safe to run my laptop with the charger permanently connected when I have access to the charger. Or is it necessary to unplug the charger when the battery is fully charged and let unload naturally and reconnect it.

  This will help to improve battery life and reduce the number of cycles of load/discgarging of the laptop battery. Or it won't do any harm to my battery.

  Thank you

  Hello

  Bateries and chargers are now smarter than you think. They stop when moving from a full charge. I have posted numerous tests and comments on this forum. Depending on how often you must bring your own laptop on, keep on the sector (with the battery on the machine) the battery will live longer.

  Kind regards.

• Question about the use of the battery double on Portege M100

  I recently had a M100 with a pair of slim-Bay batteries optionally. I have a question regarding the loading / unloading of sequence.
  It seems that when loading main battery is charged 1 followed by the secondary battery (removable). This seems logical and fair enough.

  However when it comes to the main battery appears to discharge 1 with secondary battery not passing it is 99% of the value.
  I expect the machine to unload 1 secondary battery so that in the case of having 2 secondary batteries, you can redeem them on without any worries. Also when you then install the CD player, I also, then you max left in the internal main battery autonomy.

  Are there settings to change the way in which my machine seems to work?

  Hi Max

  I'm not a technician and cannot explain how it works exactly. All that I know is all of this is controlled by electronic power supply and the user has no influence on it, and as far as I know, there is no settings allows you to specify the energy consumption.

  I agree with your opinion, but I think that there is nothing to do.

• My mcmurphy dv6 can be used without the battery. the battery is dead

  Laptop Dv6t - 1300

  Yes this time it was clogged up with the bad battery removed. Previously it would not start.

  and I'll send this to you laptop. Thank you for your comments.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!