Use of Labview to make a wave custom for the daq for output Wizard

Similar Questions

• using advanced actions to make a button appear at the end of my project - HELP

  I'm working to build a set of advanced actions, which allow a user display the buttons at the end of the test based on the responses of the text entry box. The plan that I've discovered so far is:

  1. on the slide after the TEB, I have a conditional action that uses IF cpQuizInfoLastSlidePointScored = 1, and THEN assign the Variable 1 to 1 (the variable is set to 0)

  2. at the end of the test, I have an advance action that declares the variable = 1 IF THEN hide button (the button says they did hide the bad action means they did as the correct input) ELSE view button

  I have a total of 23 of these interactions TEB

  Everything works perfectly if each answer is correct

  Everything works perfectly if each answer is wrong

  Arrises them problem when alone or some answers are wrong. When that happens, no buttons appear.

  I built a debug slide and be positive for each Variable, I built received the first interaction.

  so, what could I have done wrong on my process? Any help would be appreciated.

  Always nice to hear from someone who likes my book.

  A thing, you have not made it clear to me yet.  You say that you are running the first action 'at the entrance to the next slide. I guess you mean using the event YOU enter the quiz question slide slide follows?

  Then, you mention that "at the end of the process," you have a blank slide that performs the final conditional action.  I assume that you mean that you use the event YOU enter Slide for the Quiz results slide where your buttons is displayed?  You won't be able to perform actions SHOW/HIDE objects on slides other than the one where the action is executed.

  My personal preference to set the variables on each quiz slide would be to use the event on the success of the quiz slide just to set the variable directly instead of using a decision of conditional action block as you did. If your quiz questions are all together for a moment of success, then just using the action of success WE should have the same result, but it's just more direct and so less inclined to any question (for example if, for some reason, the system cpQuizInfo variable did not work, your event on success should always pulled).

  In theory, your way (using the system variable) should work too, but sometimes if there are several ways to do something and your current path does not work, try them the other way around can get out you of trouble.

  I guess that your final conditional action has something ELSE for each block of decision which SHOWS the button?

  One thing that also that Lilybiri would probably say, that you are trying to rename all your blocks of decision in the last conditional action.  It could be one of the names of your decision blocks is originally a kind of conflict.  I noticed that you have a name of decision block with a punctuation of hash character.  Not a good idea.

• I want to use sound recorder to save as wav audio is not wma... How do I save it as a wav or mp3 file in order to make a cd and read it in my car?

  I want to use sound recorder to save as wav audio is not wma... How do I save it as a wav or mp3 file in order to make a cd and read it in my car?

  Hello

  1 are you referring to the sound recorder program in Windows?

  2. you have all the music you want to convert to WAV?

  3 are you referring to the "Sound Converter" when you say 'tape recorder '?

  If so, you can use third party software to convert WMA to WAV audio format.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

• I use Vista, Windows Movie Maker. Problem publishing movies on computer.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  ===========================================
  More than likely you are using one or more incompatible source files...
  or the project may be too complex for your system resources.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Might be worth trying to convert your video files in .wmv format
  before you import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to make a custom for a Mac Mini view

  I am doing a custom view for a secondary screen for my mac mini.

  The custom to display what I'm doing on the secondary display is 1366 X 768

  My model number: A1347

  Mac Mini 2.6 / 8 GB/1 TB Fusion

  OS X El Capitan 10.11.3

  I tried to use a SwitchResX to make a custom view

  I also tried the manual control to a custom view, but nothing has worked

  The Mac is less than a week

  How your primary and secondary displays are connected to the Mini?

• How to use in LabVIEW DLL of the third

  Hi all

  Using maxon EPOS 2 (positioning system easy) to order the EC motor. It comes with Windows 32 - Bit DLL for labVIEW. How to use these anointings of library in labVIEW correctly? When I try to call the function of library in a LabVIEW program, it shows me a warning about a caller and if the Subvi is not executable. Do I have to change the location of files library or make any other change?

  Have you seen the KB: program a control EPOS of Maxon use LabVIEW ?

  Christian

• Creating files dull with Matlab use in LabVIEW

  I am creating a dull in LabVIEW file using the use Matlab. It seems to create a group called "Vector" without knowing precisely in, and he also concatenates the group names and the channel. I made an example to demonstrate this behavior. I am trying to create a group called 'group' and inside it a channel called "channel". What I get is similar to a group called "Vector" and inside a channel called 'GroupChannel '. What I am doing wrong?

  Best regards

  John Sackett

  Dear Stephanie,

  Thanks for your reply. Looks like I can't use the use of Matlab, because he's trying to force the dull file either as a .tdm file. I found your list of very useful resources and uses the information in "LabVIEW to MATLAB" to make my own dull file written vi.

  Best regards

  John Sackett

• Use of LabVIEW memory grows slowly but continuously during execution

  Hello

  I am having trouble with LabVIEW. I develop a data acquisition application. My application acquires data, it (i.e. make a FFT) processes and displays the FFT and samples acquired in some graphics.

  The problem I have encountered is Labview is allocation memory more every minute of what my program is running until finally, it crashes. When starting my program uses about 400 MB of memory after 4 minutes approximately 1.2 GB. Sometimes, when the memory usage reaches 1.2 GB it is suddenly up to 500 MB, but most of the time Labview crashes.

  I already checked the tool 'Profile Performance and Memory'. Surprisingly, my screws have constant use of memory during execution.

  Someone has an idea, what happens?

  Kind regards

  th

  
  

• BlackBerry smartphones make my own custom ringtone

  Simple question, how can I make my own custom ringtone & how can I install it on my BB Pearl 8220

  Get an mp3 file and save it on micro-sd card in your device.

  To save the mp3 file, there are two ways available: Roxio Media Manager (comes with Blackberry Desktop Manager with Media Manager) and when to use your Blackberry as a USB device.

  I recommend the second way.

  Transfer your mp3 ringtones folder on your micro-sd card file.

  After that, the mp3 file will be available to set as a ringtone custom to a contact in address book.

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• "Use setting customized for history" in the tab privacy options in firefox version 19.0.2 does not work

  When I select 'use custom for history setting' in the Privacy tab and press OK button nothing happens. He returned to the story to remember. I have Windows 7 and firefox 19.0.2.

  A problem that results is firefox remember now username and password on a new gmail account.

  The problem started with the latest revisions to Firefox. In the past, I've saved usernames and passwords on multiple accounts gmail without problem.

  As a result, I had access to the gmail accounts in another browser to save all my gmail account IDs and passwords.

  Any suggestions on how to remember passwords and usernames gmail again? and/or get "Use Custom setting for the story" to work? Thanks for your help

  I had the same problem this is how I solved it
  Tools > options > saved passwords > locate the corresponding site, you will see that the user name is missing highlight and delete.
  Back to the site log in enter your password and you will then be asked to save it... That's fact

• I used numbers for a long time, but only make spreadsheets base.  With the latest updates, I couldn't change my information.  What Miss me?

  I used numbers for a long time, but only make spreadsheets base.  For about a year and with the latest updates, I couldn't change my information.  What Miss me?

  Hi Deb,

  There not really enough information in your message to help you. How things don't work, exactly? Is there any alerts or messages?

  Quinn

• Use of LabView to solenoid in the gas system.

  Hello

  First of all, I'm new to the LabView program don't know much this program but it can connect and control instrument.

  Second, my Adviser want to move the manual system in an automatic system that control through LabView using

  the temperature and the pressure is a trigger to open/close the solenoid valve. (starting with the solenoid valve 3-way 2-way and 1 2)

  Third, this system starts from scratch; for now, I have an evaluation version of LabView 2010 for the test and temperature/pressure sensor in RS323

  which easily connect to LabView.

  The problem is which module or equipment to connect the solenoid with LabView?

  THK.

  I think that the Green wire solenoids ASCO is grounded.  Red and black are power.  If you use an AC solenoid, you can go from a solid state relay.  Static relay more require 3-32 VDC to a few my for the control and the control is isolated from the electrical circuit.  There are some DAQ with outputs digital equipment that can drive the input solid state relays.

  Lynn

• I would like to only convert a c++ for use in labview dll - my camera has no DLLs in labview

  I have a piezoelectric Control Board (Piezomechanik gmbh) that I would use through LabView.  Currently, the company offers no support for Labview.  Windows detect the device (it came with a driver file), but the company only provides for C++ and Visual Basic dll files.  Can I convert these files to a format that can use Labview?  How can I get Labview to communicate with the control of Narcotics (and ultimately the piezoelectric device attached)?  Thank you!

  This will help you only when you have the header for the DLL file, otherwise you have to create manually using the "call library node' and the description of api DLL wrapper or write a header file for the DLL yourself based on the documentation of the api and the wizard.

  Kind regards

  André

• Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

  Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

  Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.