Use of models and bootstrap

Similar Questions

• ? on the use of models and the addition of the text please

  Hi all

  Thanks for looking... I don't know if anyone can answer that. I'm trying to learn flash here and I've seen some tutorials and managed to create an and add text, that animate the text as a hyperlink.

  My question is about those pre-made model Animations. As snow for example. When I opened my (new folder) select (models/snow). My time line has the entire model sitting on an image. While the animation of parts model when previewing, properly and for a full minute.

  Here's the rub '

  If I want to add text and use (presets of movement), a box pop up tells me it must be interpolated and I hit OK and text blocks (so that the layer) spring to 80 executives and (snow scripted model) remains in the image #1. I hit an excerpt and my text is what I want, but the snow scripted model which is only #1 remains in place and there is no background or model goes hand in hand with my text which has been tense for 80 frames.

  I can't find the answer to what I think should be a simple drag / (snow model) on the 80 frames to match the blocks of text, so everything is copasetic and alto. However, it is not as easy as hanging out video on a timeline.

  Anyone?

  Miserably stuck,

  Netcommercial

  Scripts defined on all frames where an object exists will continue as long as this object persists. for example, make a button on frame 1, extend to 5000 frame button. Just put a script on frame 1 that the button control. The button works for 5000 frames of the script on frame 1. However if you ever remove the button (for example to add a keyframe on the layer of button) and add new, the script will not work because it is a "new instance" and you will need to be run again the button works.

• Beginner problem: using the model and cannot see in design or split

  I put in place a model, he opened and saved as a html file. I don't see anything except in code view. Split and design view just shows a grey area with yellow outline and yellow tab with the words, "template: newbasic1". "newbasic" is the name of the template that I created.

  I was able to do all my work in code view and it checks all the as valid and works. But I would like to be able to work in split view. I have no idea what I did to create this problem.

  You can see the problem pages (all pages in the site have this problem) to:

  http://mrc3.com

  Any suggestions much appreciated.

  It is completely invalid code and is the reason why you don't see what in DW Design view - simply may not know what to do with your markup.

  1. you can't have an editable region in thetag.  That's why DW will not allow you to do this via the user interface.

  2. you do not close the tag body the way you have.  It is closed here-

  
  
  

• How and where can I find my Macbook Pro using the model number

  How and where can I find my Macbook Pro "using the MODEL number" NOT the serial NUMBER please...

  Hello world:

  I would like to know more about my MacbookPro using model # is if there is a website or a program that I can type my model # so she'll tell me more on my computer...?

  http://www.EveryMac.com

• I created a budget using models and cannot change it

  I created a budget using models and cannot change it.  When I open it I can't do anything with it!  I'm stupid or what?

  Like Emily Litella, Neve rmind!

• How to register and use a model of timetable for consistent YouTube videos?

  Hey there,

  I have a model I intend to use on a consistent basis for my YouTube channel.

  It consists of a video intro, music, titles and some models of animation with the drop areas.

  I want to be able to use this model for all videos and simply insert my images to save me time in the edition.

  Is there a simple way to perform this?

  (I have some ideas how to do that, but I want to know if there is a very simple way to do)

  Select clips and create a compound clip. Store in a dedicated event (or library) and the name for easy access.

  Russ

• How to interface a simple way using LabVIEW 2009 simulink model and SIT?

  Hello

  I finally found a way to use a template simulink with LabVIEW and the Toolbox to SIT, but I'm not satisfied.

  If you have any suggestions, the link of resource that I missed, please do not hesitate to answer

  Note that I do not know much about simulink, so that is my question seems stupid, let me know what

  Software configuration

  OS: Windows (not an RT target)

  LabVIEW 2009

  SIT 2009

  question 1: interfacing the model DLL (mapping considerations) with a driver VI

  We have created a model of DLL by using the 'Workshop in real time' tab in simulink.

  In LabVIEW, launch us the tool 'SIT connection manager' and try to use the DLL with a driver VI by mapping the e/s model for screw/lights orders.

  The fact is that I fail to connect to my controls/indicators VI/o model because they do not appear in the mapping dialog box.

  The simulink single objects that I managed to map are "constant" and "test points" while I need to edit the template simulink itself (example below)

  

  Are in e/s model, not considered as part of the parameters of the model? (this could make sense because the mapping says in fact that it operates on "model parameters")

  Is it possible to link the IO model VI commands/lights?

  Note:

  -the "configure HW i/o mapping" dialog box allows me to map model e/s with e/s HW...

  -The examples also use these "constant" and "test points".

  2nd question: use of direct screw SIT

  I tried to use the DLL directly with the screws SIT (code example below)

  This kind of code works well on another project (target of 8.0/RT LV) but not on the current project (LV 2009/Windows)

  The second stage of the model never ends:

  -0-index of the loop works as expected (model doing its job).

  -index of the loop 1 starts normally, but execution is stuck in the 'SIT scheduler.vi.

  Then I have no choice that to kill LabVIEW ("Reset screws" windows appear if I try to stop/close them).

  

  Is there a reason that I do not see what explains this behavior?

  Thanks for reading.

  Any help appreciated.

  Kind regards

  Hello

  I spent some time analyzing the VI driver as you suggested.

  Here are my findings.

  Question 1: the SIT connection manager does not pass to the model SW controls/indicators. Only, it allows the user map HW AIs/AOs.

  The only solution I found (to have a SW - for example a shared variable - object that is mapped to an input/output model) is to customize the VI driver that is scripted by the SIT Connection Manager ("_Baserate Loop.vi" in the flat sequence structure named "read code")

  Question 2: after spending some time in the VI driver, it seems that the VI to call right is not 'SIT scheduler.vi' but 'If SIT take model no time' (which uses the other as a Subvi)

  

  My conclusions are correct? If I use the API in the wrong way, please let me know.

  Kind regards

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• Windows 2008 R2 NIC disconnected when converting from a model and started using workflow start-vm in VCO

  Hello

  Have a very strange problem. I wanted to apply patches using a VCO on my model R2 2012 Windows workflow and Windows 2008 R2 models. My model of Windows 2008 R2 when converted and started by the workflow VCO does NOT get an ip address. Yet, when I manually turn on the model of Windows 2008 R2 after be converted manually, it gets an ip address immediately. So weird.  There is no problem with 2012 Windows, it works very well. NOTE: The workflow that starts the virtual machine only turns on (and is built in the workflow built by vmware) Finally, today I built a new model and has the same problem. NIC is VMXNET3 and problem seems of course specific OS, has anyone seen this before?

  Thank you

  I found this article and fix it. It resembles a known issue with VSphere 5.1

  VMware KB: Registration or the deployment of a VM template fails

• Management of VMs: Which one to use, "hosts and Clusters" or "models and virtual computers.

  Hi all

  As the subject says, when you manage virtual machines, which is better to use? Hosts and Clusters? Models and virtual computers?

  It's our facility:

  Previously we had only been using "Hosts and Clusters" manage all of our virtual machines. We organize objects of the individual within vApps and Resource Pools. We had also installation on these both parent objects permissions for who has access to what.

  Basically, we have about 12 members. Everyone has their own virtual machines that they use for training, etc. We manage centralized via AD with users and groups user access. We also have some users assigned to some hosts to maintain the level of things between the two hosts. Our license does not DRS, BTW.

  I just replaced our server vCenter in preparation for our 4.1 vSphere upgrade later this year, Yes, we are on vSphere 4.0 currently. So I went ahead and 'computers models and virtual"allowing to create user folders, gave users access and placed virtual machines of all users within these folders. (I heard recently that the use of the hosts and Clusters was semantically incorrect). Even if they have access to their folder, they cannot create a virtual machine because they cannot access a host. A computer file virtual and models can be assigned to a host?

  I didn't assign permissions to each user in order to add to each host, because I didn't want others to mess with other virtual machines. All users previously red access only, but sinc the virtual machines and templates folders are not assigned to any host, they can get in their folder to create and manage their virtual machines.

  Then, I go on this wrong all the models and virtual computers and do I just keep using our hosts and Clusters of installation above permissions groups?

  Any advice on the semantics in this would be appreciated.

  Thank you

  Johnathan

  All,

  I solved my problems.

  Check book Scott Lowes ' Mastering VMware vSphere 4 "Chapter 9, he described the use of Resource Pools to the VM group under the view of the hosts & Clusters. Using the same names as the files under VMs & models and adding the same permissions, I was able to force every user to use their own folder under VMs & templates and only their Resource Pool under hosts & Clusters. So now the two views reflect the objects of each user and their access controls are correct.

  Items to remove this Lessines:

  Use Of Resource Pools under host & Clusters to manage the default host for users.

  Files under VMs & models allows you to manage virtual machines model announcement for each user (simple view).

  Thanks for the help,

  Johnathan

• Model and options not available using VMware Infrastructure Client of cloning

  Hello, yesterday I posted in the wrong place. The administrator sets and I got a resolution of a few posters. Thank you. I have ESX 3.5 stable running on my HP Server. I also managed to install a virtual machine to Windows 2003 server and installed the VMware tools on this instance. I am so very happy. I added a second virtual machine and instead of executing Setup from a CD, I wanted to work with a model or a clone. While using the client VMWare says that I should be able to clone a virtual machine, or make a model, I don't have the option. In reading, it seems that I need Virtual Server Client. Is this correct? I'm downloading the client I think, but also wondered if this client has been designed to replace my VMWare Client on my workstation? It runs on windows XP? Or I have to build another server? My hat is off all who were able to become experts. Although the idea sounds simple enough, trying to get my head around it proved to be one of the most difficult software that I had to learn on my own. Thanks in advance for any help or pointers. Regards, Mark

  models and cloning are characteristic of vCenter.  It is a separate download, but also the price.  You will use the VIC to access your vCenter server.  The vCenter Server would be hosted on a Windows operating system.

  You can download an evaluation version which is good for 60 days.

  https://www.VMware.com/tryvmware/?p=VI3&LP=1

  Hope this helps

• JSF - lack of source code using the creation of models and composition

  It's really strange, or maybe I don't understand JSF.
  
  Supposedly to make the long story short, I have the following:
  
  a. masterLayout.xhtml file - primary model
  b. file myPractice.xhtml - compositions that uses templates to file masterLayout.xhtml
  
  masterLayout.xhtml page go to myPractice.xhtml (using ajax). The myPractice.xhtml rendered correctly - shows all components of the model and its own page. But when I check the "see source code page", I see the source code of masterLayout.xhtml.
  
  Here is the part of the source code:
  
  IMPORTANT NOTE: masterLayout.xhtml has a COMMANDBUTTON RICHFACES (a4j:commandButton) WHICH RENDER THE PANEL ID "MyPractice" FOUND IN myPractice.xhtml. Means that this rendering of the page via ajax commandButton control.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  masterLayout.xhtml (model)
  
  :
  < a4j:commandButton styleClass = "#{control.myPracticeStyle}" value = "MY PRACTICE" action = "myPractice' actionListener =" #{control.myPracticeAction} "make = 'myPractice' / > '.
  :
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / >
  < name ui:insert 'content' = >
  < / ui:insert >
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / h:form >
  
  You can see the ui: insert above.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  myPractice.xhtml
  
  "< ui:composition template="/templates/masterLayout.xhtml ">
  
  < ui: set name = "content" >
  
  < id rich: panel = "myPractice" style = "height: 764px; border: 0px; padding: 0px; ">
  
  < table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" >
  
  < b >
  
  < style td = "width: 100%;" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" >
  
  < f: facet name = "header" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" columns = "5" columnClasses = "overviewTabColumn, aumTabColumn, feesTabColumn, cashFlowTabColumn, emptyTabColumn" >
  
  < a4j:commandButton styleClass = "#{control.overviewStyle}" value = "OVERVIEW" action = 'Preview' actionListener = "#{control.overviewAction}" make = 'Preview' / > '.
  
  < a4j:commandButton styleClass = "#{control.aumStyle} ' value = 'AUM' action = 'aum' actionListener =" #{control.aumAction} "make = 'aum' / > '.
  
  < a4j:commandButton styleClass = "#{control.feesStyle} ' value = 'FEES' action = 'fees' actionListener =" #{control.feesAction} "make = 'fees' / > '.
  
  < a4j:commandButton styleClass = "#{control.cashFlowStyle}" value = "CASH FLOW" action = "Cash Flow" actionListener = "#{control.cashFlowAction}" make = 'Cash Flow' / > '.
  
  < h:outputText value = "" style = "width: 100%;" / > "
  
  
  < / h:panelGrid >
  
  < / f: facet >
  
  < / h:panelGrid >
  
  < table >
  
  < /tr >
  
  < b >
  
  < td > < table >
  
  < /tr >
  
  < b >
  < td >
  < name ui:insert 'subContent' = >
  < / ui:insert >
  < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / ui: define >
  
  < ui:composition >
  
  This set define supposed to go in the ui section: masterLayout.xhtml insert.
  
  ===================================================================================================
  
  Source of real "see Page" FireFox or IE when myPractice.xhtml is made and displayed.
  
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / > < = missing source code?
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < / div >
  < div >
  
  "< input type ="hidden"name ="javax.faces.ViewState"id =" javax.faces.ViewState "value ="-2088890247043631074:-2632132869735171398 "
  AutoComplete = "off" / >
  
  < / make >
  
  < / body >
  
  < / html >
  < / ui:composition >
  
  If you look at this "source code" view Page"carefully comparing to masterLayout.xhtml, from the height: 780px, you will notice the name of ui: insert section = 'content' is... empty.

  When you "view source" you made an another GET, that renders the page in its original state. It is not the source as it is currently displayed for example after a button push.

• can import and use a model in 3ds Max with softimage CAT OS system?

  Hello
  
  I modeled and textured various animals 3D 3D Studio Max 2009.
  and I used the plugin CAT Softimage to rig and animate the animals.
  now they all have nice loop at foot of the animations.
  
  I wonder if I can import my animals 3D with their system of cat bones in Director.
  I don't need to control their and any necessary interactive movement as well, they just move from one place to another while playing their animation market
  
  I know that the system bone standart in max allows the Director. but I have no idea on the Cat Bone system of softimage.
  Here is the link for it:
  http://www.Adobe.com/support/Director/work_3d/playing_animations/
  
  Please guide me if this is possible using Softimage CAT OS system on 3DS MAX plugin.
  
  Thank you
  

  front of softimage bought, the cat was a plugin for max for years. When autodesk softimage they incorporated in 3dmax it works. the group just the bones with the mesh and your property. CAT will save you a lot of time animate

  This was done with cat

  http://3dsee.110mb.com/dragonflycircle.htm

• Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

  Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

  I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

  I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

  Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

  But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  Thank you hope that your next print job loose its staples.

  Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

  Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

  In response to your questions:

  1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
  2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
  3. Continue the first paragraph.

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?