Use of OleInstall.InstallPrinter dll

Similar Questions

• Satellite P100-160: Mono sound when you use MciSendString() calling Winmm.dll

  I have a Satellite P100-160.
  The sound works well for some programs, Windows Media Player, etc. Audigy.

  However when I call for its program using MciSendString() calling Winmm.dll I get only mono sound channel, good times left channel is almost silent. SetAudio volume has no effect.
  I've updated the BIOS and the audio driver for the latest versions available on this site.

  Does anyone have a solution or pointer to a solution.

  Is it really a laptop problem?
  Maybe the multimedia function MciSendString() provides only the mono or your have done something wrong?  :|

  See Microsoft Developer Network:
  http://msdn2.Microsoft.com/en-us/library/ms709492 (vs.85) .aspx

  I don't know what you want to do and why you use the MciSendString() to call Winmm.dll, but if the sound display correctly using current players like Windows Media Player, for example, I really put t see any hardware problem m

  Note it is a Toshiba user forum and here you will encounter common users who share knowledge and solve common issues of interest.
  In your case, I recommend you to visit a few Microsoft developer forums and support sites.

  Best regards and good luck

• dial the node of the library - using a structure with dll

  Hi people.

  I expect to receive assistance or advice on solving this problem I am having in labview:

  Some background - I am using the 'call library node' to allow me to use a .dll file to control remotely via RS - 232 power supply.

  I did very well so far, but I'm now trying to use the following:

  int TC4GetFnBlockSettings (struct T_FnBlock * p_fnblock, unsigned int type)

  int TC4SetFnBlockSettings (struct T_FnBlock * p_fnblock, unsigned int type)

  where

  struct T_FnBlock

  {

  unsigned int BaseFunction;

  Double amplitude;

  paper Offset double;

  Double symmetry;

  Double frequency;

  int BipolarAmplitude;

  int RectifyAmplitude;

  Double ExpTimeConstant;

  unsigned int NumPeriods;

  unsigned int UserDefAmplitude;

  unsigned int UserDefTimePrescaler;

  Double UserDefPeriodLength;

  unsigned int UserDefNumPoints;

  unsigned int InactiveLevelType;

  Double InactiveLevel;

  unsigned int AAPInputType;

  unsigned int AAPInputFilterKoeff;

  unsigned int AAPFlags;

  Double AAPInputScaling ;} ;

  Of course there is no such thing as a structure in Labview; I had hoped to use a cluster in its place, but the CLN does not input or output of a cluster.

  Any help would be appreciated!

  Thank you

  A cluster is a struct. In this case you don't want really the structure, but the pointer, which is problematic. I have read several posts about problems with this. The simplest solution would be to expose a function with the struct as input instead of the pointer, if you can.

  /Y

• Reliablity of the use of the CVI DLLs in testStand

  Hello

  I wrote a file .dll using the ICB and tries to use the functions available in aid TestStand. I get strange errors, not always but when I run TestStand. Here is my code in the dll.

  int GetAverage (double* aBuffer, unsigned int aSize, double* aAverage)
  {
      double total = 0;
      enum t_eErrorCode eErrorCode = 0;
  
      if(aSize <= 0)
      {
          eErrorCode = eARRAY_SIZE_ZERO;
          goto Error;
      }
      for(int i = 0; i < aSize; i++)
          total += aBuffer[i];
      *aAverage = total / (aSize);
  Error:
      return eErrorCode;
  
  }
  

  He sometimes throws only an eError_SIZE_ZERO error, but when I checked in the debugger TestStand, size sent to the function was not a nullity (see attachment).

  What can be the reason or what I am doing wrong?

  Thanks in advance,

  RB

  Hello

  This link should help you with debugging.

• asynchronuous functions do not work in a c# used by CVI application dll

  Hello

  I have an application written with CVI 9.0.1, who must interact with a dll c# 2010 (which has no window) through a CVI<->wrapper .net (created with the controller of the CVI useful .net).

  This c# dll uses the functions asynchronuous, as NetworkStream.BeginRead () and EndRead() of an object of System.Net.Sockets.TcpClient for example.

  These asynchronuous functions work very well when the c# dll is used by a c# application (with a main window) or the c# dll is converted into a stand-alone c# program (having a window with buttons, call its methods, just to try), but asynchronuous functions do not work when my c# dll is called by my CVI application (which is my goal) : execution remains inside the NetworkStream.BeginRead () for example (for the concerned thread).

  NetworkStream.BeginRead () can be bypassed successfully by using the function alternator NetworkStream.Read () instead, but the c# dll uses any other asynchronuous functions which have no associated alternator function.

  Here's some c# code (I don't have the source code of the Snmp object; got_trap() method is never called when asynchonuous calls do not work):

  public void run() / / wire

  {

  SNMP snmp = null;

  Try

  {

  SNMP = new Snmp (true);

  SNMP. NotifyListenPort = 162;

  SNMP. NotifyRegister (null, null, new NotifyCallback (got_trap), CB_DATA_);

  isActive = true;

  Timeout.Infinite;

  }

  ...

  }

  Thinking it might be a problem with the window messages that could not be processed (in the c# dll), I tried to replace the Timeout.Infinite statement in the code where the management of asynchronuous are held, by a creation of window over my loop of messages in Win32 window, but asynchronuous functions do not work better (while my loop seems to process messages successfully) :

  Form myForm = new Form(); an empty window

  myForm.Show ();

  int bRet;

  MSG msg = new MSG();

  While ((bRet = GetMessage (out msg, IntPtr.Zero, 0, 0))! = 0)

  {

  If (bRet == - 1).

  {

  handle the error and possibly out

  }

  on the other

  {

  Switch (msg.message)

  {

  default: / / everything else

  TranslateMessage (Ref msg);

  DispatchMessage (Ref msg);

  break;

  }

  }

  }

  Any idea?

  Thank you

  rvfr.

  Solved: in fact, the Assembly of snmp I used just need to be registered dotNet.

  rvfr.

• Report to DENY using LV 2011 built dll crash

  I have an application that uses a built DLLs LabVIEW.  LV dll is called by a dll ActiveX component integrated into VS 2010.  The dll of the LV was origninally built using LV 2010 and worked well.  When we build the same application using LV 2011, everything works up until the closure of the top-level application.  We are then prompted with a dialog box telling us that a failure has been detected (journal text below).  The error occurs if we use static or dynamic linking to the dll.  If I disable DENY it to the application, there is no problem; If as we use a component ActiveX, I must create a for the calling application ini file or disable the DENY for the entire system.  None of these options is desirable, because we cannot know all applications that could use our ActiveX module and cannot control each system we will be deployed on.  If we do not find a work around that, we will have to go back to LV 2010.

  ####
  #Date: Thu, October 27, 2011 13:28:20
  #OSName: Windows 7 Professional
  #OSVers: 6.1
  #OSBuild: 7600
  #AppName: home page
  #Version: 11.0 32-bit
  #AppKind: AppLib
  Base address of #LabVIEW: 0 x 30000000

  27/10/2011 1:32:41.891 PM
  Crash 0 x 0: Crash taken to DENY
  File Unknown (0): Crash: Crash captured by DENYING
  Minidump ID: 6972c89d-ba7b-437a-9d41-d3df28550f98
  ExceptionCode: 0xc0020001y
  N

  I think I've solved my problem, which I will describe in the case where the same thing is happening to others.  The root of the problem, near as I can tell, had something to do with the appeal of the LV dll of in another dll. For some reason, when I linked statically to the dll, the DllUnload process caused this crash report.  I found evidence to suggest that this can occur when you unload a dll from in the process of unloading in another dll on the web; as is the case with static linking.  When I tried dynamic link, I initially tried to use a global instance of the HINSTANCE dll who got charged and discharged with the WinApp object, the result would have been basically the same.  If I connect dynamically to the unload dll event and explicitly the dll before the call dll being unloaded, the problem disappears.  My calling dll is an ActiveX application, I tied to the instance of the dll to the COM object rather than the object WinApp.

  Still don't know why it's a problem for LV 2011 and not 2010 LV.  Perhaps the 'crash' still past and just has not been reported significantly since the app was close anyway.  I'm not sure.  Anyway, hope this helps people out there.

• Acquire GigE camera data using labview CIN or DLL to call.

  I am tring to acquire data from a basler runner line CCD camera (GigE).

  Because the NI Vision Development Module is not free, and the camera provide a C++ API and C and also some examples, so I plan on using the function CIN or call DLLS in labview to achieve. Is this possible?

  I tried to generate a DLL with the example of the company code of the camera. But encounter difficulties;

  I did that a little background in C++, but not familiar with it. The C++ Code example provides the camera is a C++ (a source Code file) and a .cproj file, it depends on other files, the camera API directory.

  If I build the project directly, it will create an application window, not in a DLL. I don't know how to convert a DLL project, given that other information such as dependence in the .cproj file, other than source code.

  Can someone help me with this?

  Don't forget that for the acquisition of a GigE camera, you must only Module of Acquisition of Vision, not the entire Vision Development Module. Acquisition of vision is much lower price and also delivered free with hardware NI Vision current (for example a card PCIe - 8231 GigE Vision of purchase). You need only Vision Development Module if you then want to use pre-made image processing duties. If you are just display, save images to disk, or image processing using your own code (for example to manipulate the pixels of the image in a table) you can do so with just Vision Acquisition.

  It is certainly possible to call DLL functions if LabVIEW by using a node called library, it would be quite a lot of work unless you are very familiar with C/C++. Since their driver interface is C++, you need to create wrapper functions in C in a DLL that you write. Depending on how much you want to expose functions, this could be a bit of work.

  Eric

• should what program I use to open a dll file?

  My computer has been recently cleaned and I replace some dll files, but I can't open them. What do I need?

  Hello

  1. why you try to replace any dll file?
  2 are. what dll file you referring?

  There is no Microsoft program or utility that can help you read the dll file. Please use your favorite search engine to search for the same thing.

  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Use of VMWare.Vim.dll without PowerCLI

  Hello

  Is it possible to use VMWare.Vim.dll without installed PowerCLI?

  I developed a code using VMWare.Vim.dll in my system that has installed PowerCLI.

  When I run the application in another machine, it is thrown exceptions.

  Is required PowerCLI in the machine in which we execute the application?

  Thank you.

  According using VMware vSphere PowerCLI views from .NET it seems to require installation of PowerCLI.

• Why used acrobat download core dll

  I get acrobat could not download core DLL

  Hi bigdumby,

  Please check the KB: http://helpx.adobe.com/acrobat/kb/acrobat-failed-load-core-dll.html

  http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• TDMS C DLL can be used in a VB project?

  Hello

  We have a project in vb using position information stored in an excel file.

  Now, we want to use these data as well as information contained in a PDM file.

  I tried using the TDM C DLL provided in http://ni.intellisurvey.com/run/2007codelicenseagree, vain.

  When I try to add the reference to the .dll, this error pops up:

  «Cannot add the reference to "/ filepath/nilibdcc.dll.»» "Make sure you can access the component or it is a COM component validates.

  (The message is a translation from Spanish)

  What I am doing wrong? It is possible to use it?

  Thank you

  Hi Tomacco,

  CT-C-DLL is designed to access the files of TDM (S) using C.

  Otherwise, it is possible to access the VB dll. Please refer to this article: http://support.microsoft.com/kb/106553. But I tried to havn't CT-C-DLL.

  Another option is to use Measurement Studio , if you want to access TDMS of in VB.

  Stefan

• DLL Help application retired that we use now?

  Hello

  I used to search for DLL files in an online database provided by Microsoft.  It seems that it is no longer available.  It shows the DLL Help request was withdrawn on February 8, 2010 and is no longer accessible.

  Is there an available from Microsoft or another reputable vendor or Google my only option?

  Thanks for your time.

  Hello

  You will need to find a third party solution as the database was withdrawn on February 8, 2010.

  http://support.Microsoft.com/dllhelp/?DllType=file&l=55&S=1&x=17&y=14&Alpha= {KW_UTF8} & ei = UTF-8 & oe = UTF-8

  You can use your favorite search engine to find third-party solutions.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Using GPMC dll without installing GPMC product

  Hi friends,

  I'm developing a c# application that compares the GPO of the current computer with the recommended. It should be a 'light' app that can run on multiple computers without installation.

  In order to read the GPO to the computer, I used "Microsoft.GroupPolicy.Management.dll" (it works well).

  I copied the exe and the dll (including the error message) in a folder to another computer, when I run it, I get the following error:

  Could not load file or assembly 'Microsoft.GroupPolicy.ServerAdminTools.GpmgmtLib, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = 31bf3856ad364e35' or one of its dependencies. The system cannot find the specified file.

  Is it possible to use the GPMC dll without the product of the GPMC installed?

  Eyal.

  Reginiano,

  As you try to develop an application of C3, this query is best in the following MSDN forum.

  Thanks for posting the request here.

  Answer if you have other issues with Windows and we will be happy to help.

• Oracle.Dataaccess.dll using unmanaged for 32 and 64 bit Winform application.

  Hello

  I am new to oracle ODP.

  I have a few questions about her.

  1. If I give the reference only and do not include gac Oracle.Dataaccess.dll (suppose 2.11.3.XX) in my project and the client system has the access.dll of oracle version 2.11.2.XX(or autres) then what happens?

  Be it use the 2.11.2.xx DLL to GAC or error.

  2. I need to create some app for 32 and 64-bit client then should I develop a version for two separate, or are there other alternatives (I can't use the managed oracle DLLS due to .net 2.0).

  I've already lost two days on managing versions of oracle as oci.dll ddll, oraop11s.dll etc.

  Please suggest any other alternative if you have

  Thank you

  I think that if you run an application on machine Win x 64 with AnyCPU, 64-bit .NET will be always charged. I don't think you can change this even if you try to load a 32-bit DLL. There may be a way, but I do not know myself.

  If you ODP.NET 11.2.0.3 on your system, I don't see why you need to install an earlier version of ODP.NET, such as 11.2.x