Used to install Flash Player - said the Flash Player Settings Manager is open

Similar Questions

• How does the online Flash Player Settings Manager?

  That's one thing, I've always been curious to know: How does the Flash Player Settings Manager ?

  It's a UI SWF running in a regular reader of Flash, but there obviously access to all kinds of Flash Player settings low level, a typical SWF is not.

  My first guess is that the user interface is in fact built into Flash Player, but then why would you go to visit a website to see? The SWF file is actually be served by the site Web and Flash Player's trust to the Web site to access a low level player not made public API?

  As a Flash developer for many years I've just been curious about this for a long time. Now that the Manager is obsolete by the construction in the settings (which is a lot less mysterious) Manager, I thought I would ask before it is completely forgotten.

  -Aaron

  Yes, the SWF is imbued with special powers, which are linked to the domain that sovereign wealth funds are served from.  The settings are basically just special LSO.

• Flash player settings manager

  I have the latest version 11.7.700.224 and receiving excessive error messages "errors on this site it will be malfunctioning."

  seems most of them include Flash Player.

  I tried to locate in Control Panel or by double clicking on the Flash Player "Flash player settings manager" but he did not.

  I also deleted all in c:\windows\system32\macromed under Windows\system32 uninstalled Flash and re-installed to try to get rid of errors but no luck

  clean files TIF, cache etc.

  My OS is Vista ultimate and IE7

  I also tried to use Firefox and chrome, but same thing happens.

  I did not any changes

  any ideas would be very appreciated

  Thank you and have a nice day

  Rented

  Errors, I was becoming are now supported

  Thanks for the help anyway

• Used to install Flash Player

  Try to install the latest update on the spirit of Mac (El Capitan 10.11 - 5) Google Chrome browser.  Download Installer but when I double click to do the installation, a message appears asking you my user id and password.  The back of user id is already filled in (my real name, not the email addresses that is my adobe id) and if I put the password just changed in it will not take it.  No message is displayed to tell me what the problem is.  The box just shimmies.  Can you tell me what am I doing wrong / should do differently?

  Hello

  Link below might be useful:

  What userid & password should I install Flash Player?

  Adobe Flash Player install for all versions

  Flash Player Help

  Thank you

• Used to install Flash Player 15

  I tried the install protocols - normal installation and uninstall and reinstall it from the secondary source of: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  With the normal installation I receive 75% full and then get a ' error: General Setup error "message.

  With the alternative source install I get to 7% and it said "installation failed."  That's all.

  I am running OSX 10.7.5

  Firefox 33.1.1

  Safari 6.1.6

  I have tried everything and can't get flash to install.  Thoughts?

  Cannot install flash player

  Went on this forum.  This process worked!

• Used to install Flash Player on Windows 7 64-bit

  I have install Flash and it says installation complete, but it is not iincluded n my list of programs.

  When I try to view someything who use it I get a message saying that I need Flash

  Any ideas?

  Hi, you must use the Adobe uninstaller that you can download to your desktop:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Then download the Flash Player for Internet Explorer installation program on your desktop:

  http://fpdownload.Macromedia.com/Get/flashplayer/Current/Install_flash_player_ax.exe

  You must use the 32-bit browser which is the default value. To be sure, go to help and click on about Internet Explorer, x 86 should be listed and you are using the 32-bit browser.

  You must also run as administrator.

  After that you have on your desktop, close all browsers, disable any messenger or other applications that use Flash

  (Check the system tray)

  Launch the uninstaller. When you are done, Reboot (restart) your computer. When fully charged, Reboot again (to make sure that all the old Flash files are deleted.

  Then run the installation program and once finished, reboot once.

  Test your installation here:http://kb2.adobe.com/cps/155/tn_15507.html

  If you have any questions, post just before or after.

  Thank you

  eidnolb

• Used to install Flash Player 9

  I trouble shot everything. Whenever I'm agree terms and proceed to install Flash 9, I go to the download screen and it is just and load or install several times. This green bar 'activity' won't stop blinking and never ends. I uninstalled all old, even adobe got this for active x zip file. Nothing is running while I try. Any time I try to play videos anywhere online that they come in white. I'm at an impasse here. Help me please! I run on Windows XP home.
  
  Caleb

  Hey look, I found a solution that worked for me. I uninstalled all using some program that provided adobe. After I did it, I stop and restart in 'safe mode with networking ". I then come on adobe and it downloaded in a few seconds. I hope this works for you guys too!

  Caleb

• Used to install VMware-player - 5.0.1 - 894247-

  Hi all

  Please advise by the following:

  I'm running a W7 64 bit, I recently had to do a repair of Win7 ISO installation, which I think that spoil probably set some time. Cause now, I can't start VMware 2nd partition, I got an error that I don't remember now but basically does not allow me to start my Windows XP Edition VM family. So I decided to re install WMware with c or d with no luck.

  Whenever I try to install it, I get the following error:

  Could not create key: \SOFTWARE\VMware,Inc.\VMwarePlayer\Dormant\License.player.5.0.e1.201209. Check that you have sufficient access to that key or contact your support team.

  If I hit enter on IGNORE, it will the same error, but:

  Could not create key < bis >...

  CPT

  StartFields
  ProductID
  LicenseVersion
  LicenseType
  Epic.
  Data
  DataHash
  Hash
  Option

  After that it gives me another error as follows:

  The MSI 'C:\Users\Mauro\AppData\Local\Temp\vmware_1360701860\vmwareplayer_x64.msi' failed. [Same error as above]

  Read newspapers attached files.

  Any help to solve this problem is appreciated.

  Saludos,

  Mauro

  The solution that I found when I tried to reinstall Vmware on Windows 7 operating system was to

  1.) erase all files from the disk Local Windows (c) / x 86/Vmware programs

  2.) erase all disk Local Windows (c) VMware files / Windows/System 32 / Config and drive Local (c) / Windows / System 32/drivers

  (3.) to remove all the temporary files on your computer.

  (4.) after download the Free Windows Registry Repair. Link for this program is below.

  {---> http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html<-------->

  (5.) once the program is installed run the registry repair.

  6.) when you see the list of registry, errors, go to one of the lines and right-click on it.

  (7.) to go to the registry editor.

  8.) from there, you'll have to watch although each file and see the description of the file to see if it belongs to the company of Vmware. (These files will have an indicator, for example, VMbooter and so - forth.) Make sure you get VM in the name of the file).

  9.) after that you have all the files that have been deleted from your hard drive, run a Disk Defrag and clean disk just for the performance of your.

  (10.) you want to go to VMware web site to download the version of vmware you previously as 3.0.1 4.0.1 and so on. This will be the MSI file you need that is corrupted

  * While the program is reinstall, you will notice the prompt will ask you if you want to uninstall your current version of VMware. You'll notice that's nothing in the description. (Do the cleared off the coast of files and a core hidden in the program) *.

  11.) as soon as the old MSI download file. Install the newest MSI file (currently VMware Player 5.0.1) and you should see no complications so every step meticulously were complete.

• Re: How to install any boot on the Satellite A300 Vista Manager

  I want to install second OS on my A300 but can't do any boot manager works with Vista.

  IBM os/2 bootmanager can start Vista, but Vista say he can't run winload and hang up, Acronis bootmanager does not see any OS to Vista's NTFS disk...

  Hello

  Vista supports a clean Vista Boot Manager and there you can add all the installed OS.
  I did after I installed my Win XP as second operating system.

  First, I installed Win XP on the second partition but I couldn't start on Vista because Win XP damaged MBR (master boot record). That's why I started again from disk (NOT the Toshiba Recovery disk) Vista and the Vista disc to repair the MBR.
  Then, I started in Vista and edited the BCD. You can use the freetool like EasyBCD because that would be the best way to add a second operating system for the Vista Boot Manager.

  See you soon

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I use simultaneous multiple profiles without breaking the HTML default window manager?

  I have two Firefox icons, one with the ' - p 'MyProfile' - no-remote ' options and the other with the "- p"MyGirlfriendsProfile"- no-remote ' options." It works fine; We both have on separate pages connected with no conflict. However, when I click on a link or one HTML file in any other program, Windows tries to start a new process, rather than load the target in one of the two running, and I get the error "Firefox is already in running... ». I found the registry key 'HKEY_CLASSES_ROOT\FirefoxHTML\shell\open\command', which provides the parameters for the manipulation of targets related to Firefox and tried adding 'Pei 'MyProfile' - no-remote', but it does not work.

  Is it possible I can get Windows 7 to open the links/files in my profile in the process that is already running?

  This has happened

  Each time Firefox opened

  == I started using separate profiles

  Impossible to send a link to an external program to a Firefox instance that is started with the - non-interrupteur remote.
  This switch converts than Firefox (undetectable) invisible instance for other programs.
  One solution is to drag the link in the window of Firefox.
  You only need to use the - No.-remote switch if you need to have two profiles open at the same time and I guess it won't happen in your case if you leave Firefox open and running all the time.

  See also http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Adobe reader, said "the patch package could not be opened."

  I want to be able to read my e.on, a few pages of a cataloge etc. electricity bill.  Adobe reader is not.  I get the message: there is a problem with Adobe acrobat reader.  If this is the case, please exit and try again", but this has no effect.   I decided to uninstall Adobe reader and then reinstall.  but, again, I get a message, this time, it reads «the patch package could not be opened...» I'd like an answer!

  Thank you

  Roy Barry

  You will find the Adobe Reader support in this forum: http://forums.adobe.com/community/adobe_reader_forums/adobe_reader

• Used to install Flash Player: "failed connection".

  Hello

  I tried a dozen times to install the latest version of Adobe Flash Player, but it won't happen. I keep getting 'connection failed. Click Retry to resume the installation', and when I click on start, nothing happens. I tried redownloading Flash Player and try again but still the same problem, as well with Firefox (43.0.2) and Safari (8.0.7). I thought that it might be Intego NetBarrier causing the problem, but even when I allow all incoming internet connections with it, the Flash problem still happens. (iMac OS10.10.4).

  Can someone please help?

  Hello

  I will need to get an installation log files from your part to continue the investigation.  Please read the FAQ where can I find the Flash Player on Macintosh Setup log? and provide all the 4 files listed (install.log, FlashPlayerInstallManager.log, Adobe_ADM.log and Adobe_GDE.log).  Download the files in cloud.acrobat.com using the instructions How to share a document or your choice of file sharing service.  Post the link the files downloaded in your response.

  You can also use the installation program offline posted at the bottom of the Installation problems | Flash Player | Mac page in the section "problems".  However, without the installer online logs we will not be able to solve the problem to solve.

  Thank you.

  --

  Maria

• used to install Flash

  I am trying to install the new version of Flash player on Windows 7, 64-bit system. I disabled my antivirus and click on download. Before the race, Save, open box comes even he says the site, I am downloading from is not available or does not exist. Every time. I checked Add ons and Shockwave Flash is activated. I had the old version of Flash player on my computer, and it disappeared, disappeared completely, I don't know what happened. My son was using my computer while I was out of town, it can be deleted or the antivirus did. It worked last week! Me still seem to have Adobe reader installed and it works fine... It's weird! I can't watch the videos or TV shows, I have download without Flash... Someone please help! I'm frustrated! M

  You have uninstalled the remnants of your Flash damged via Add or remove programs from the control panel of the system? If this is not the case, try this. Also clear cache of your browser download and, possibly, manualyl remove any Flash caches in your folder temp of the user and the Flash installation folder.

  Mylenium

• Local Flash Player Settings Manager

  I just found this entry on the control panel. System and Security page. It offers a staggering number of radio button choice that I don't understand. It is a major security issue or can it be simply ignored? If the first case, what are the best options?

  Examples:

  Storage [allow sites to record information about this computer]

  Reading [Networking] cooperative

  Advanced [delete data and navigation settings] and [remove this computer]

  Hi Jim,.

  Thanks for posting your query in Microsoft Community.

  It doesn't seem to be a question of important security that Flash Player has been such an add-on with Internet Explorer version has been integrated into Internet Explorer 11 to work together.  For more information about option buttons, plugins or any specific setting provided in the Flash drive, I would recommend to contact Adobe support.

  Adobe: Flash Player support

  Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.