User account does not load.

Similar Questions

• After 10.11.3 updated, user account does not load

  I was previously running 10.11.2 on my iMac mid-2011 (32 GB of RAM, 1 TB Samsung EVO SSD) and just ran the update to 10.11.3. To restart, I noticed that my system has remained to a black screen but showed the mouse cursor and I could move around, but the system was insensitive to the keyboard. I made a stop hard and under voltage after 10 seconds. The system started an on-screen connection and when I tried to log in, the system just hung with the loading gear runs for about 5 minutes. I gave up and made another hard stop and this time started in safe mode. While in SafeMode my account main would not load again, I made a hard stop and tried another account - success. So now that I know that there is something to the top with my user account, I tried to boot normally in other accounts - success.

  At this point, I'll try disk warrior to see if it will fix all problems running. I would run Onyx but the download comes of this order. If anyone has any experience with this update to sabotage their user account, please let me know.

  DiskWarrior has not helped and not more than Onyx.

• User profile does not load correctly, the user could not be connected.

  I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• The user profile does not load correctly

  Running Vista Ultimate.  I have 2 user accounts, the two administrators.  If a user remains logged on for any period of time (more than 10 minutes), disconnects, and then another user logs on, they will get the dreaded "your user account is not load correctly."

  A reboot always restores the afflicted user account.  Web an extensive search doesn't have all the solutions near mine.

  Examined the msgs of following error in the application event log: 1511 1515 WARNING WARNING 1502 1508 error.  This just started recently.

  Appreciate your help.

  Have installed kaspersky AV and media center tv pack units.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you've added the Google toolbar, Chrome or the z
  Google Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I am the administrator on my pc. and my user profile does not load.

  recently, when I connect I get a message saying that the user profile does not, or will not, support. How can I fix it? Be admin, I can't make all the changes that my profile does not load. I can connect with my husband and children, as their loading user profiles, but, when I try to make changes and type my password properly, it won't connect so I can't do anything! Help! Thank you!

  Yes, you will lose everything when you re-install.

  If you are able to logon to an account that can back up personal files as much as you want to keep on an external hard drive, or Flash drives or DVDs.

  You will need to re - install all the programs you already have installed.

• my user profile does not load correctly. My system logged me in my computer using the temporary profile

  original title: user profile

  . When in safe mode, I see all my apps, but in normal mode, it does not load properly.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• trying to loadin my facebook in goole account does not load

  I am trying to load my facebook account on goole.com does not load

  Are the only websites from loading correctly?

  It's a problem with Facebook alone?

  You see an error or a warning message?

  Try to disconnect from the internet and reconnect again"

  Delete internet browsing history

  Contact your Internet service provider

• my user profile does not load correctly

  my user profile does not correctly load system continues to connect with a temporary file. All I had on my screen disappeared! How can I get that back as it was? I tried to restore to an earlier time, but no luck.

  Hello

  Check this box:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Does that help?

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• The user profile does not load

  I received the message, the service user profile Service does not logon, user profile cannot be loaded.  How can I fix?

  I received the message, the service user profile Service does not logon, user profile cannot be loaded.  How can I fix?

  You have another admin account, you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window to logon safemode, you see another admin next to your account? If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft Support below.

  Tutorial from Microsoft support :
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application
  http://support.Microsoft.com/kb/947215

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The user profile does not load at startup - vista help

  When I turn on my computer and choose me as the user (which is the only user he is listed on the computer), I get an error messgae saying: unable to load the user profile...

  How can I fix it?

  Thanks much for the ideas! really enjoyed

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Administrator account does not load

  Hello
  I had problems with IE 8 and wanted to uninstall/reinstall, but admin password did not work with the pop-up window when logged in as a normal user.  I went to the admin profile users but not able to connect and received the following message.

  Service user profile Service has no logon. User profile cannot be loaded

  So I go into the event viewer to see the activity and find the following:

  • The description for event ID 0 in source AtBroker is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
  • If the event is on another computer, the display information had to be saved with the event.
  • The following information has been included in the event:
  • GetSessionValue has not value public session error 2

  And it requires an admin override in the details of xml:

  -
   Access is denied.
  • Windows cannot load the user's profile, but you have logged on with the default profile for the system.
  • DETAIL - access is denied.

  Because I do not have access to the security log, I pulled the above on the Application logs.

  Last TPM is used in Vista Home Premium edition?

  Could not find a TPM Module (TPM) security device works on this computer. TBS could not be started.

  Thanks for your time.

  Hey bubbles Whith,

  O your computer is on a domain?

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To resolve this issue, follow these steps:

  1. Delete the profile by using the computer properties dialog box. To do this, follow these steps:

  (a) click Start, right-click computer, and then click Properties.

  (b) click on change settings.

  (c) in the System Properties dialog box, click the Advanced tab.

  (d) under user profiles, click settings.

  (e) in the user profiles dialog box, select the profile that you want to remove, click Remove, and then click OK.

  1. Click on start toreduce this includes this image, type regedit in the box Start Search and press ENTER.
  2. Search for, and then expand the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  1. Right-click the SID that you want to remove and then click Remove.
  2. Log on to the computer and create a new profile.

  http://support.Microsoft.com/kb/947215

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• User accounts does not initially and windows to remember password for account (evil)

  Hello

  Thanks for any help in advance.

  TLDR: Windows trying to connect in user 1 with the old password and does not give me the option to connect user 2

  I'm trying to set up a new account for my roommate to use. It's something I've done many times before and never had a problem with.

  This time, however it is causing me pain.

  First off I created a new user account (user 2) gave him a password and him give a normal user account (not admin). I also changed the password on my account (user 1) which is an administrator account.

  Now when I restarted my computer I expected to go to the login screen and give me two options (user 1 and user 2) that would require a password. I should mention here that before that I created the 2 user I've ever seen the login screen as it starts directly on my desk.

  What is happening at startup, it is just after windows logo I get the message "the password is incorrect" (on the lines in any case).

  When I confirm this message I show the log on screen but it only shows the user accounts 1 and 'others '.

  I can enter the new password for the user 1 at this stage and connect fine, I can also go the "other accounts" and enter credentials user 2 and connect fine but on reboot, I get again the opinion of incorrect password and user 2 is not always displayed on the login screen.

  The incorrect password, he speaks is the old password for user 1, but I'm not enter, it of like windows remembered the old password and trying to enter to connect directly to user 1 with it.

  I tried to do admin user 2 also, but no difference is made.

  If someone has an idea, they would be much appreciated,

  Thank you.

  What is happening at startup, it is just after windows logo I get the message "the password is incorrect" (on the lines in any case).

  When I confirm this message I show the log on screen but it only shows the user accounts 1 and 'others '.

  This happens because someone has configured your machine some time ago to connect automatically. You can adjust the process according to your needs:

  1. press Windows + R key on your keyboard.
  2. Enter the following command and press ENTER:
  netplwiz
  3. check the box that requires users to enter a password.
  4. click on OK.
  5. take note of the process for later use.

• The search in a single user account does not work.

  Original title: Research on Windows 8

  Research on a Windows 8 does not (by typing in the menu start is nothing, Windows + F - nothing happens, do a right click on start-> Search-nothing happens) while working on other accounts. What causes this problem?

  Here, it seems a problem with corruption of the account. If the features work correctly on other accounts, and the other is isolated.

  Given that most of the functions with the Windows key do not work, I recommend that you create a new account and transfer the content and work on the new. Remove the one who has problems.

  new user

  Transfer files from the folder of the user by referring to the article:

  hTh

• User account does not show "all programs" in the Start Menu in XP

  When I press the Start button on my user account on my computer, the button that shows "all programs" is not there so I can't access any of the programs on my computer. What should I do to let me have access to all the programs here?

  http://xperiencexp.blogspot.com/2005/10/all-programs-menu-missing.html

  Try this link to see if it helps.

• User accounts does not

  My secondary accounts are not able to access.  The administrator account works fine.  When I clicked on secondary accounts, nothing happens.

  Hi Slingshot 22,

  A. user accounts how many are there?

  B. what type of user account?

  C. when he last work very well?

  D. recent changes made on your computer?

  First, you try to open a secondary account in safe mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are unable to open an account even in safe mode, you may create a new user account and verify.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]