CRCDISK.exe hangs up on start up

Similar Questions

• TCrdMain.exe hangs up after Vista wakes

  TCrdMain.exe hangs up after windows vista wakes up. How to fix?

  Hello

  AFAIK the tcrdmain.exe belongs to the TOSHIBA Flash Cards application.
  I think that reinstall this application might help.
  Try this. Maybe it helps

• I have photo hangs when I start a slideshow with I photo 11

  I have Photo hangs when I start a slide show.  Using iPhoto 11, version 9.4.3

  Validate the first 100-200 journal of crash lines

• Windows XP Setup hangs at «Setup starts Windows...» "after all the required drivers on the CD loading.

  My Pentium III 1.0 GHz computer (394 MB of RAM, disk hard 500 GB) crapped out on me after that I loaded soft PicturePerfect of Nikon.  For some reason, the Nikon software ruined my registry.  Now, whenever I turn on my PC, I get the BSOD with error "Unpaginated IPF in space".   I can't start my computer in safe mode or "start Windows normally" as I get the same error msg almost immediately without seeing the Windows logo and progress bar.  I can start my PC using the "last good known Configuration" and he will be starting the Microsoft Windows logo with the progress small downstairs bar, so I know that the hard drive is fine.  Then the screen goes black while WinXP is loading from the hard drive, and then the BSOD with error page comes up.  I suspect that there is incorrect data in a critical area of the drive where Windows requires data start correctly.   In the meantime, I can't boot into Windows at all because all Windows options lead to BSOD with the msg of error page.

  I resigned myself to reloading Windows XP from scratch, but I can't seem to get my original installation CD to not work.  I've reconfigured my BIOS to Boot CD, and then start the original Windows XP CD.  He reads and load it all very well, and then it hangs at «Setup starts Windows...» "I thought he had to test the equipment, but it remained in this State for 3 hours!  The "Welcome to Windows Setup" screen never came.

  I thought to use FDISK to the new drive of 500 GB and formatting on the errors on the hard drive, but I can't do since I can't complete the installation process.  I feel stuck in a bad situation where I can't enter BACK to FDISK and FORMAT my C: drive.

  Pls help!

  Thank you!

  Here's what I did and learned:

  1. I replaced my DVD burner with my CD - R original delivered with the machine and disconnected the 2nd CD - R.

  2. I disconnected my 2nd hard drive, in part to minimize the current of the power supply, but also to keep clean and simple start between a (hard) C: and D: (CD - R) drives.

  3. I re-tested my SDRAM using test mode full and deep.  To my surprise, I found not 1 but 2 SDRAM bad!  I replaced the original SDRAM 128 MB and re-directed tests of memory with the Diagnostocs memory of Windows and Memtest86 +.  All the 512 MB of RAM is perfect now.

  4. I started to new WinXP and have the msg «Setup starts Windows...» ».  This time, I waited for about 15 minutes and to my surprise the configuration screen came!  There is a long period of time between the msg «Setup starts Windows...» "at the start, and when the configuration menu actually comes to the screen.  I was able to partition and format my hard drive.

  Lessons learned:
  -Maintain the number of devices to a minimum so that it keeps unknown hardware failures to confuse the troubleshooting questions.
  -Test the RAM in deep test mode is important and test several times.
  -It could be more than 1 Bank of RAM can be bad so carefully test RAM.
  -Wait for the next Windows installation menu.  It is not instantaneous, but it will come sooner or later.

  Thank you!!!

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Explorer.exe has errors on start up that invites a temporary office to use. Vista was preinstalled, so I don't have a version of re - install?

  Explorer.exe has errors on start up that invites a temporary office to use. Vista was preinstalled, so I don't have a version of re - install?

  Hello

  Any manufacturer should provide a means of recovery, it is more often to another partition on the hard drive which is accessible at startup. See your documentation for instructions to access or post with the brand and model of your system for instructions.

  As for the error, it means that you have a corrupted profile and these cannot be fixed. What you need to do is to connect to another administrator account and create one for yourself. Log in there and copy your personal files before deleting the original. The process is described in this article: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• launch of 3 notepad.exe when windows 7 starts.

  3 launch notepad.exe when windows 7 starts, it will not show place at the office, they appear in the Task Manager process section.
  I tried the solution provided by another forum as the registry key remove under execution folder, but I can't find the value of any notebook, start
  dint section display anything on notepad.exe, but he still launch when windows starts. Someone at - he found the solution for this problem?

  Hi AnsonAng,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, I understand that you receive a Notepad jump up all in connection to the system.

  He would be grateful if you can answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  I suggest that you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135      
  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  I recommend you let flow the Microsoft Safety Scanner and check if that helps resolve the issue.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  We would be more than happy to help you if the steps above did not solve the problem.

• Windows 8 operating system, BTTray.exe was able to start, BtBalloon.dll is not found

  I have a Windows 8 operating system. Whenever I start my PC, I get this error message. BTTray.exe was able to start because BtBalloon.dll is not found, reinstalling the application may fix this problem. I do not even begin to know what is BtBalloon.dll, where can I find it and how do I reinstall. I tried to recover deleted files and reinstal them but there was no improvement. I also tried to do a restore to an earlier date, but she refused.

  Help, please.

  Reinstall your Broadcom Bluetooth drivers.

• I failed repeatedly when downloading files Acrobat_2015_Web_WWMUI.exe then I tried start click on download. but after 5 times I tried, it seems now a notice like this: "Sorry, Too many download attempts: 5. you were allowed to upload only 5 t.

  I failed repeatedly when downloading files Acrobat_2015_Web_WWMUI.exe then I tried start click on download. but after 5 times I tried, it seems now a notice like this:

  "Sorry,

  Too many download attempts: 5. you were allowed to upload only 5 times.

  If you have any questions, please contact Digital River Customer Service to the " [email protected] ."

  How can I re - download the file?

  order number: 10089840159

  Have you tried to download at the bottom of link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• ESSSVR.exe hangs after starting service

  Hello world
  
  We have a dedicated server of Essbase. Today we started to receive a time-out of TCP/IP error trying to connect to the Regional service.
  The first thing we noticed is the 'service for Essbase OPMN' ran in fact - is the only service of Essbase on this server.
  At first, we tried to restart the service, but the problem persisted. Then we tried to restart the server, but that did not help either.
  Finally, we have noticed that when you launch the service started (using the oracle provided the .bat files), while the service starts, a process of ESSSVR.exe is displayed in the Task Manager, but once the service is started, the process of ESSSVER.exe breaks down and it disappears from the Task Manager.
  
  What can be wrong?
  
  Thank you.
  
  Kind regards
  
  G.Sanchez

  Yes try to remove tempessbase.sec or that works try to rename essbase.bak to essbase.sec or come back from a backup of essbase.sec

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Explorer.exe hangs up, have to end task, and then restart help!

  I am running XP, incidentally. It will hang, that the fan is working hard, and I have to end task to exit, and then add it to the. What is going on? Any ideas? Thanks in advance!

  Hi KatinaHollman,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. when exactly the Windows Explorer crashes on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  FIX: The Explorer.exe process stops responding (hangs) when you use Windows Explorer that hosts a shell that has been created using MFC extension

  http://support.Microsoft.com/kb/972685

  Method 2

  If the previous step fails, then check if the problem persists in the safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Explorer.exe hangs NOT iexplorer

  Windows 7 Professional

  Whenever I do a right click or left click on an image on the desktop, I get this:

  Windows crashes

  I can "Find a solution and restart the program", 'close program', or 'wait to face. "

  And then, he arranges everything on my desk.

  Here are the details:

  Description:
  A problem caused this program blocking interact with Windows.

  Signature of the problem:
  Problem event name: AppHangB1
  Application name: explorer.exe
  Application version: 6.1.7601.23418
  Application timestamp: 570898dc
  Hang Signature: d1f5
  Hanging Type: 524288
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Signing of additional blocking 1: d1f5c7177135d8c8bea74dfea0349ffa
  Signing of additional blocking 2: 5d7d
  Signing of additional blocking 3: 5d7d695ae4927aa519ebc58f6784ce67
  Signing of additional blocking 4: d1f5
  Signing of additional blocking 5: d1f5c7177135d8c8bea74dfea0349ffa
  Signing of additional blocking 6: 5d7d
  Signing of additional blocking 7: 5d7d695ae4927aa519ebc58f6784ce67

  I ran malware bytes, done SFC and the problem still persists.

  Hi Jomalik,

  Thanks for posting your concern. We are here to help. Most of the time, the Explorer crashes due to a bad or corrupt context Menu. To help you with the problem, you may need to follow these steps.

  1. click on Start, type command prompt or cmd in the box Search .
  2. right click on command promptand then click run as administrator.
  3. at the command prompt, type sfc/scannow, and then press enter. The sfc/scannow command will scan all protected system files and replace the corrupted files by a cached copy which is located in a compressed folder to % WinDir%\System32\dllcache.

  Note: Do not close the command prompt window until the audit is 100%.

  Let us know how it goes.

• Pavilion dv7 hangs on windows start screen

  Hi all

  This problem started a few days after I bought this computer in June, and I have tried everything I can think of including the factory restore and nothing has helped. I really don't want to return it because I really like it, but I can't stand this problem starting. I bought this one after I returned a dv6 for a power supply problem, it would not turn on at all after I had it for only a few weeks.

  When the laptop is turned on it starts and then freezes on windows start screen. It takes a few other tests of the switch, tool repair, before I can get it to come. The repair tool is useless for this problem. In this process, I also end up with BSOD and stop errors. The error that appears now is 0 X 00009086. I will use no more restore because it isn't helped either.

  A computer brand new, not even a month and he has this major problem. I've read other articles published on the dv7 and have not found anything else to try.

  Windows 7 home.

  I would appreciate any ideas to try before I end up taking it back too.  Don't bode well for buying another HP again that's for sure.

  Hello

  I had already tried the first two options and they did not help.

  When I tried the 3rd option gave you the process stopped at C:\WINDOWS\system32\drivers\classpnp.sys.  I looked into this and found it to be a problem in Vista too. I have read through the postings for this but haven't tried anything yet.

  BSOD Stop error message... 9086 is associated with this start hang up.

  I move from the Intel site and ran their audit tool then update the HM65 Chipset. This had no effect on the victory starts page suspended.

  I ran sfc and he found no violation of integrity.

  I was leaving my laptop because it is easier then trying to make it work again properly now 4-5 tries to make it work. It aggravates really me that I have this problem with a new computer.

  I try next?

  Thank you for your help on this.

  Louise

  20/03/16 UPDATE ON THIS PROBLEM.

  I installed Windows 7 Pro and have not had a problem with start up since.

• nicitdl5.exe error message stops start twice

  I recently installed NI LabVIEW 2011 on Windows XP.  Before that I never opened LabVIEW, when I start the computer I get an error twice before the end of the boot: "Runtime Error!" "Program: C:\WINDOWS\system32\nicitdl5.exe ' a window titled"Microsoft Visual C++ Runtime Library.

  What is nicitdl5.exe?  Why it gives me an error of a newly installed LabVIEW?  How to stop error?

  Hi user17625,

  In my view, that the problem is related to the Datalogging and supervisory control Module.  What do you use?  If this is not the case, try to uninstall.

  Best,