User interface artifacts in beta of Mac OS Sierra on 2013 Mac Pro

Similar Questions

• Feedback from the user interface

  In the Simulator (090), when the user selects the gear (top right) to display a list of parameters to select, the bar of the background and button scrolls down.  However, it is not intuitive how to return to the "main" screen  Still, the down arrow in the main screen button bar pointing downwards and is grayed out.  There seems to be a second "up" button placed in the Center, but it is masked by the "Media" button  Suggest that it is more obvious to select and restore.  Suggest you hide the button bar, make the less gray background and make the arrow more obvious upward so that the user knows that they can select the area to restore.

  Don't forget, this is still in phase beta/Simulator, I am sure that the final design of the user interface will be better/more intuitive.

• What should I use to create the user interface of a CEAP plugin on mac

  Hey there,

  I'm new to the development of a plugin, but I did development of script for quite a long time however. I'm tring to develop an ECAP plugin. I go to the sample project of "Panelator" (from AE CC SDK), but I don't know how to create ui for the control panel plugin stuff.

  The sample project is not an example of code to do this on a mac computer, I found the code examle for windows however.

  So, can someone generously tell me how? I had to do with cocoa? But as I understand it, I can only use Objective-C to write cocoa ui.

  Thank you very much!!!

  Hi Li Zhiqing,

  We have just announced in the next major update to AE CC signs HTML5 is supported:

  http://blogs.Adobe.com/AfterEffects/2014/04/new-changed-after-effects-CC-2014.html

  This will allow to create the user interface using HTML5 and use your scripts for the conduct of AE.  It is quite a bit easier than the use of cocoa for the construction of the UI panel.  Thoughts?

• Shell of the supplied user interface? Incompatible with Beta Guide

  Hi all
  
  I found a BETA guide dealing with a UI shell - http://www.orastudy.com/oradoc/selfstu/fusion/ doc.1111 /e15524/ui_impl_uishell.htm.
  
  Can't see in the different versions of the Jdev I have 11.1.4 thru to version 1.2
  
  I tried the new updates etc, and I again as the model of dynamic shell.
  
  Indices or that has yet to be officially released?
  
  See you soon,.
  
  Simo

  Hello

  is the model of shell dynamic tab exactly. Note that the Shell user interface model began as a model and then added to the product under the name of model Dynamic tab Shell JDeveloper

  Frank

  PS. : Beta documentation rarely remains the source of the truth

  Published by: Frank Nimphius, October 30, 2011 05:15

• Why is there no user interface for moving the cache locations/profile?

  OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
  (this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
  To change your profile location? The doc only that talks on this subject here:
  http://KB.mozillazine.org/Moving_your_profile_folder
  and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?

  And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?

  There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)

  Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.

  Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.
  
  https://developer.Mozilla.org/en/Profile_Manager
  
  https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager
  
  http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/
  
  You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• How to get TS::SequenceContextPtr to customize the user interface

  I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

  Is there a reason that UIMessages are not enough?

  Just off the top of my head, here are a few concerns with the not not using UIMessages:

  1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.
  
  
  2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.
  
  
  3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

  The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

  Thank you

• cRIO with interface user interface structure

  Hi guys,.

  I am new to Labview and way to start my first cRIO VI. My question is a bit broad, so I'll try to make it as clear as possible.

  My project will include a display of the user interface where the user initially sets some parameters that are passed to RIO by a central core of UI. This group includes both controls and indicators (all sensors/controllers, via RIO) which should be amended or updated in real time.

  Looking at the cRIO examples found in the developer's guide, it seems that all the screws are loaded from the present cRIO folder in a project. This is the common practice? Also, should I run my vi of cRIO screen UI. Wouldn't it be better if I run it locally (i.e. within the host project folder) and call all the RIO under breast screws? In addition, what the controllers of type definition? This should not also be placed in the folder of the local host? My problem is that running the vi main UI directly from RIO has some limitations (by example cannot use invoke nodes to open/close some live and cannot use subgroups).

  Thanks for your time,

  Harry

  Adnan,

  Thanks for the very fast response and the very clear answer... I am very confident for my project now...

  See you soon,.

  Harry

• Simple TestStand in LabVIEW user interface

  Hello community,

  I design a user interface for Teststand using the simple example of vi. The name of the file is VI.vi of first level

  I am trying to understand works vi inorder to make changes and ran into a few questions that I was hoping someone could answer for me please.

  To begin, I add my file sequence and click on 'Test DUT'. Then a dialog box appears asking to enter the serial number of the UUT, where and what are the causes that to happen in the code? After I entered my serial number it turns my code sequence and at the end an another message specifying in a green or red if the UUT success or failure. Where and what are the causes of success/failure boxes happen in the code?

  Thank you

  Kevin

  If you had posted this on the forum of TestStand, you would be probably got some of the answers better.

  But in the meantime, you need to open the SequentialModel.seq (or what is process model you use) and navigate to the entry Point of execution sequence, you use.  In this case, click Test UUT, the icon in the list of sequence and track the flow of test.

  With respect to the banner that appears after execution of USE test.  The banner is implemented as a DLL in the PostUUT callback.  It is based on the status of the MainSequence callback result.  It is the result of the test that you started by test DUT.

  The best advice I can give you is to go through the sequence of process template file and learn that it is not an easy task, but worth the effort.

  Thank you

  PH

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• user interface customized with VI does not

  Hello

  I tried to use a user interface customized for VBAI using VI. I got to the point where I can run the VI all by himself and to see the work of logic. However when I add to as part of the user interface and switch to the inspection mode and run it, it does nothing. Let me know if I'm doing something wrong. Attached you will find the program, I work with.

  Thank you.

  I just tried your VI... you must have a VI that does not forever in a loop. You can use some time recording the loop that runs once and uses the SHIFT to follow the previous results of previous runs of the step. Use of the is the first call? Primitive in LV to initialize the first shift register. Here is a modified Test.vi that will work better.

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Is it possible to design the Ribbon user interface in Visual Studio 2010?

  Interface user of the Ribbon is like in Windows 7.  I have an XP, and I would like to know if it is possible to make ribbons in XP.  I see a design of Ribbon toolbar, but it is not available and I don't see a way to enable it.  There is no toolbar "Ribbon creation."  My friend is not very bright and often merges do not with a Ribbon user interface.

  Hello

  The question you have posted is related to Visual Studio and would be better suited to the Discussion Visual Studio groups.
  Please visit the link below to find a community that will provide the support you want.
  http://social.msdn.Microsoft.com/forums/en-us/VSTO/threads

  It will be useful.

• DOM-Cross Site Scripting Vulnerability (http-client-side-xss) cased by a SharePoint 2010 file: MS. USER INTERFACE. Pub.Ribbon.js

  Hello

  We have implemented a portal that is connected to the Internet by using SharePoint 2010. We used a vulnerability scanner, called Rapid7 (https://www.rapid7.com).

  He noted that the portal is vulnerable to the based on DOM cross-site-scripting (XSS). The affected file is a SharePoint integrated in the Layouts folder: MS. USER INTERFACE. Pub.Ribbon.js

  The detailed message is as below:

  / _layouts/SP. USER INTERFACE. Pub.Ribbon.js line 94: exit dangerous customer call showUnapprovedXmlHttp.send () with the concatenation of 94:String argLine contaminated with the concatenation of 94:String valueLine controlled by the user with the concatenation of 94:String valueLine controlled by the user with the concatenation of 94:String valueLine of controlled use with the concatenation of 94:String controlled by the user valueLine with 94:Result valueLine controlled by the user of taint where are stored the calling function on ordered valueLine 94 : "document. URL.split... "... Split toLowerCase ' is controlled by the user

  References:

  Source	Reference
  CERT	CA-2000-02
  OWASP-2010	A2
  OWASP-2013	A3
  URL	http://en.Wikipedia.org/wiki/Cross_site_scripting
  URL	http://www.webappsec.org/projects/articles/071105.shtml

  Please advise on how to solve the problem of Security reported.

  Thank you

  Randy

  Hello Randy,

  Thanks for posting your question on the Forum of the Microsoft community.

  The question will be better suited to the audience of it professionals on the MSDN forums.

  I would recommend posting your query in the MSDN Forums.
   
  MSDN forum
  http://social.msdn.Microsoft.com/forums/SharePoint/en-us/home?Forum=sharepointgeneralprevious

  Thank you

• Failure of XP Mode User Interface

  After update mode XP de Windows 7, update to reboot hung on logout. Now, it gives message on restart XP Mode User Interface failure.

  The message reads as follows:
  «You cannot start a remote desktop connection because the Windows login on the remote computer software has been replaced by the software incompatible msgina.dll.»

  To correct this problem, please ask the administrator of the remote computer contact the program vendor for a version that is compatible with Windows. »

  XP mode does not start safe mode. Message "cannot start Windows Virtual PC Host Process. Check the log of the events system for more details. Server execution failed. »
  The event log showed that the normal start of the items for XP Mode.

  Additional notes about XP Mode start in Normal operation:
  1 icon starts Windows XP Mode.vmc
  2. from the virtual computer dialog box is displayed.
  3. the User Interface dialog appears.
  4. hibernation dialog box appears and closes after completion.

  I also tried a system restore, but that did not help.

  Hi James,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.