User profile why does XP Home disappears

Similar Questions

• Satellite L655D - user profile service does not load

  I was not able to log in to my partner on a new user account, guard showing the message user profile service does not-
  I have already tried to use face recognition, but was not able to configure it correctly and delete the account.

  The problem of user accounts has been present since I deleted the account of recognition of faces.

  Any ideas how I can restore the user account created for someone else on this computer.

  Hello

  I think that there is already a solution for this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57534

  This seems to be a known issue of Windows and you can fix that running the Microsoft Fix this Microsoft Fix it 50446 problem provided by Microsoft

• User profile service does not not a profile

  I am the administrator on my computer at home, my wife and I have a profile but my profile
  does not load. I am not able to access the user profile Service to restart. Does anyone have an idea
  How can I restore my profile?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Get the message "service user profile Service does not have logon user failed to load profile

  Have you tried "Fix a corrupted user profile" and have gotten to the point 5 "locate the C:\Users\Old... Username folder... but I can't find it.  My husband and I use the same computer, his site is OK then passed by him to try to challenge mine but not luck. What I am doing wrong?

  Have you tried "Fix a corrupted user profile" and have gotten to the point 5 "locate the C:\Users\Old... Username folder... but I can't find it.  My husband and I use the same computer, his site is OK then passed by him to try to challenge mine but not luck. What I am doing wrong?

  First line of action is to do a system restore, if you remember a 'good' date when you didn't have a problem. Use this good date as your restore point.
  Do and go to safe mode to restore your system:
  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  System Restore:

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• user profile service does not the logon, user profile cannot be loaded

  I can't login under my user profile.  It's the administrator user.  I can log in as another user, but can't access my files.  Someone who has had this problem and found a solution, please let me know how they did it?  I read through many answers and don't know which way to go.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C660 - service user profile Service does not have the opening of session

  I recently bought the C660 laptop and have used without problem, now I am unable to open a session.

  I get the message;

  The user profile Service service has no logon
  User profile cannot be loaded.

  Any ideas would be very welcome.

  Hello

  Please take a look here in this MS article knowledge base:
  http://support.Microsoft.com/kb/947215

  You will find a nice workarounds that should solve the problem of logon.
  It seems one of the workarounds to show you how to change the registry

  Check it out

• Desktop HP Pavilion p7: user profile service does not connect, cannot load user profile

  What happened to a certain number of times now. When I try to log on my user profile, it indicates that the user's profile could not and cannot be loaded. I should know how to handle this problem but it was a few months ago and I don't remember how to access my profile. Can you help me? Also, is there a way to simply build a new profile instead of trying to solve the old one every few months?

  One of the fastest ways did a system restore to a date prior to the issue. Start in Safe Mode - once in safe mode, start / all programs, accessories, system to System Restore tools. Choose a restore date.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Here, the document shows ways to fix or create a new user profile:

  https://support.Microsoft.com/en-us/KB/947215/

• How can I fix my account when he says 'the user profile service does not log. User profile cannot be loaded. » ? Help!

  I go to my account and it says that and I have no idea how to fix this, I have all the pics on my account and everything, which is a way I can fix it it and wont lose anything? Thank you!

  Hello elenaax34,

  Read the answer to the same problem as yours in this link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-user-profile-service-service-failed-the-logon/61570922-c072-E011-8dfc-68b599b31bf5

• Not able to open a session in Windows 7 message service user profile service does not logon and the user profile cannot be loaded

  the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
  My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-core

  Hi ravichandrans36,

  Thank you for using Microsoft Windows forum.

  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

  To resolve this issue, follow these steps:

  1 delete the profile by using the computer properties dialog box. To do this, follow these steps:

  a. Click Start, right-click computer and then click Properties.
  b. click on change settings.
  c. in the System Properties dialog box, click the Advanced tab.
  d. under user profiles, click settings.
  e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
   
  2. Click Start, type regedit in the start search box and then press ENTER.

  3. Locate, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  4 right-click the SID that you want to delete and then click on remove.

  5 log on to the computer and create a new profile.

  For more information, see: http://support.microsoft.com/kb/947215

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Kind regards
  Aziz Nadeem - Microsoft Support

• User - Service service user profile password does not have logon. User profile cannot be loaded

  Yesterday, when I try to connect to my laptop and enter the user password bring me a message says: "the Service user profile service has no logon. User profile cannot be loaded. I can't access my folder of my user. I am the administrator. Help please

  http://support.Microsoft.com/kb/947215/en-us

• How to connect to my user profile account if I typed my password and it says "service user profile Service does not log, failed to load the user profile?

  Can someone please help soon, I have to finish a project that I can't do without my files. I tried several times to log in to my user account, but it keeps showing an error message. I typed my password and the message is "service user profile Service has no logon. User profile cannot be loaded. I tried to restart my computer, the file sharing with another person on this computer to try to access my files, but nothing seemed to work. It just happened all of a sudden, yesterday I was on the computer and turn off the computer for the first time in a while. Before as I would just close the laptop, so I would not waste time log. But today I tried to open a session and received an error message and I can't connect to my user profile. Help, please!

  Hello

  ·         You did recently changes to your configuration?

  Try to follow this link: http://support.microsoft.com/kb/947215

• Service user profile Service does not have logon could not load user profile

  Saturday night as I was closing my computer a windows automatic update came and installed before I could turn it off. Sunday when I tried to turn it back on, I got the above error message.  I tried to go to Safe Mode and it does not open, I also tried to change the passwords, but it does not work. I can't go past a user.  What should I do now please I need help.

  Thank you, Janet

  > I tried to go to Safe Mode and it opens.
  What does not? Not opening not safe mode?
  If you can not even in safe mode, then ignore what is written below.

  .......................................................................................

  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why does my calendar disappear? Help! Please, I beg you!

  So here we are again.  When I drag down what to the timeline, it turns black and disappears until I do a file/save.  I am totally perplexed and frustrated.  I thought I solved the problem by buying an ATI RADEON HD4350, but it does the same thing even with the new video card.  I have a processor intel core i5, am running windows 7 and 8 MB of ram.

  Please someone help! I'm about to pay the $39 technical support to see if they can fix it... and I'm not optimistic that they can... UGH!

  I enclose photos of what happens... top pic is before I do drag... bottom is me drag an image down... as you can see, the display disappears except for article, I am dragging...

  opusf15

  There are a few posts on something similar to this just now, saying have a browser open can cause problems. Take a look at

  http://forums.Adobe.com/message/2981942?TSTART=0

  and there was something on the cow, which suggests that perhaps a graphical refresh problem

  http://forums.CreativeCOW.NET/ReadPost/3/902652
  Unfortunately, no one seems to still have developed a definitive answer.

• Error message - 'the user profile service does not log, failed to load the user profile.

  When you try to log on my laptop running Windows Vista business, I get the error message and cannot access the laptop. This problem started after installing a windows update. Anyone else had this? Does anyone know how to get around and access the laptop?

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• When I try to log on to my account, I can't and he says: my user profile cannot be loaded and the user profile service does not log

  cannot connect to my account

  cannot connect to my account

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window to logon in safe mode.
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft Support tutorial below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft Support below.

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.