user tracking

Hello
I want to follow users who will connect to the dashboard according to its connection date and time.
is there a clever way to do this? Thank you

ORA-01745 and ORA-00984 are errors of db oracle. Variable user suppose to be in ' '.

Published by: Srini VIEREN on 15 January 2013 08:13

Tags: Business Intelligence

Similar Questions

User name is not filled are in the table of user tracking.

Hi all

I use LMS 4.2 I activated the user tracking and I get the ip address, MAC address, host name in the table of user tracking. But enter username in the user tracking is not be filled. I even enabled get the username by guests in the areas of host NTS and ND in the acquisition of user tracking settings.

Is there something else I have to configure in LMS in order to get the names of users in tracking user table?

any comments will be appreciated,

Thanks in advance,

Rgds,

Selva

You must utility utility that integrates with LMS with AD to feed it with user names. Utility is a utility that allows to collect the usernames of PDCs Active Directory and Novell servers.

To do this, you need to install utility in main domain controllers Windows and Novell servers. You can also install utility in an Active Directory server.

For more details, see:

http://www.Cisco.com/en/us/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/Admin/ut_du.html#wp1187865

-Thank you

LMS 3.2 (solaris 10) - user tracking: once again "ogs_server_urn" not found! Errors

LMS 3.2 on a solaris 10 server that had problems with ctm_config.txt in the past (https://supportforums.cisco.com/thread/2033941) now once again has problems with the device Selector in UT. There are FATAL errors of type it below connected to CampusOGSServer.log:

[Tue 19 Oct 18:27:22 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
[Tue 19 Oct 18:30:52 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server
[Tue 19 Oct 18:33:03 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
[Tue 19 Oct 18:35:04 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/Pre-deployed
[Tue 19 Oct 18:35:05 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/User Defined groups

To create failure I'm going to UT > reports > generator-online Switch Port report > Switch Port summary
The switch of the device that opens contains all devices and clicking the search button produces the following error:

Problem with file /WEB-INF/screens/deviceselector/DeviceFilter.jsp! URN_NOT_FOUND: urn 'ogs_server_urn': not found!

also, the following error is located in /opt/CSCOpx/MDC/tomcat/logs/stdout.log:

October 18, 2010 14:18:49 org.apache.catalina.core.ApplicationDispatcher invoke

SERIOUS: Servlet.service () for servlet jsp threw exception

com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND: urn 'ogs_server_urn': not found!

at com.cisco.nm.xms.ctm.client.CTMCall.establishIPC(CTMCall.java:238)

to com.cisco.nm.xms.ctm.client.CTMCall. (CTMCall.java:218)

to com.cisco.nm.xms.ctm.client.CTMClientProxy. (CTMClientProxy.java:64)

at com.cisco.nm.xms.ctm.client.CTMClientProxy.getProxy(CTMClientProxy.java:180)

at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:179)

at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:98)

to com.cisco.nm.xms.ogs.client.OGSServerProxy. (OGSServerProxy.java:85)

at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getServerProxy(OGSRuleExpressionUtil.java:102)

at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClassDefUtil(OGSRuleExpressionUtil.java:123)

at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getInternalClasses(OGSRuleExpressionUtil.java:153)

at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClasses(OGSRuleExpressionUtil.java:174)

at org.apache.jsp.WEB_002dINF.screens.deviceselector.DeviceFilter_jsp._jspService(DeviceFilter_jsp.java:158)

at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:594)

at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:506)

at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)

at org.apache.jasper.runtime.PageContextImpl.include(PageContextImpl.java:614)

at com.cisco.nm.uii.taglib.framework.ContentAreaTag.doStartTag(ContentAreaTag.java:76)

at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspx_meth_embu_contentarea_0(popup_jsp.java:876)

at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspService(popup_jsp.java:693)

at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:470)

at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:405)

at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)

at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)

at com.cisco.nm.uii.UIIController.processActionForward(UIIController.java:380)

at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)

at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

at com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)

at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)

at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)

at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)

at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)

at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)

at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)

at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:199)

at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:282)

at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:754)

at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:684)

to org.apache.jk.common.ChannelSocket$ SocketConnection.runIt (ChannelSocket.java:876)

to org.apache.tomcat.util.threads.ThreadPool$ ControlRunnable.run (ThreadPool.java:684)

at java.lang.Thread.run(Thread.java:595)

I checked the file ctm_config.txt in the directory campus and cmapps, removed the files ctmregistry and ctmregistry.backup from/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib, deleted all files and directories below/opt/CSCOpx/MDC/tomcat/work/Standalone/localhost/and restart the services.
No change...

What I noticed by looking directly in the database of the CMF is that "CampusOgsGroupCacheTable" is completely empty where the following tables contain data:
CampusOgsGroupPropertiesTable
CampusOGSTagTable
CampusUserGroupAssociationTable

What could be the reason for this behavior?

I still thought of the option to export all groups of CMF (or at least groups of campus) and delete all tables of OGS and re-import the groups but when I try to do it I get the following error:

[email protected] / * /-server #. / perl./OGSCli.sh u admin
Enter the password for the CiscoWorks:
Authentication succeeded.
INFO: Type EXIT to exit from OGSCli guest at any time.
Enter a task OGSCli [export]: export
Enter a filename of export groups:./OGSGroupExport.info
WARN: The details of the group in the selected file will be replaced by new groups of export information. Do you want to continue? (y/n) [n]: y
Enter a name of group hierarchy defined by the user to export or the full export of all groups defined by the user of all of the applications [all]: all the
INFO: Hierarchies of groups defined by the user in all the applications that are installed in all servers, will be exported to. / OGSGroupExport.info.
Authorization succeeded.
ERROR: Could not export the specified groups, user-defined hierarchies in. / OGSGroupExport.info.
ERROR: This could be due to one or more of the following reasons:
ERROR: * OGSServer process may not work
ERROR: * remote server consolidation or Application may not be accessible
ERROR: * lack perhaps of free disk space
ERROR: * you do not have the required file permissions to create the file.
ERROR: See /var/adm/CSCOpx/log/CMFOGSClient.log for more details.
[email protected] / * /-server #. / perl./OGSCli.sh u admin d
Enter the password for the CiscoWorks:
Authentication failed.
Check the username and password you entered.
[email protected] / * /-server #.

just to be sure, I download the 2 files ctm_config.txt...

Instead of setting DYNAMIC_PORT_ALLOCATION = 0, replace perms on both ctm_config.txt 0444 files, use the original port and see if UT works. If so, run in this configuration for some time see if corruption returns. It should not since casuser won't be able to write to the file.

Live Session of user tracking

This seems to be a newbie question but I've searched and have not found the answer. The majority of my stocks float non-persistent office pools. I have a pool with 4 machines inside assigned to specific users. If a dedicated users is connected to a session on their zero client then goes to different zero client and signs, their initial meeting at their second location moves, leaving all their open apps. But if a user who is assigned to a desktop computer in the non-persistent pool is connected a place then sign to a different place, their first session session them immediately and logs location second in a new office of the pool. Is it possible to have floating users works like the first scenario? We have some users who work in different offices throughout the day and it would be useful that their session running could just transfer to another physical location.

Yes, after the screenshot you have 'Automatic logoff after disconnect' the value 'immediately '.

Try to define who, at a reasonable time, as 15 min for the user to be able to connect another client and maintain the session.

Use of user track in buckets of 48 hours for each month

I have an obligation to follow the use by the user in buckets of 48 hours for each month. For example, from midnight on 1st Oct, create buckets of 48 hours thanks to 23:59 on 31 Oct. For each user, how many times they use the system in each bucket 48 hours? I try to avoid PL/SQL, if I can so right SQL is preferred. Thank you very much in advance for your help.

Usage_Table (sample data)

ID User_Name Create_DateTime

This last 100 10/01/11 00:01:58
This last 101 01/10/11 01:02:31
102 user_B 02/10/11 14:44:32
This last 103 04/10/11 08:21:11
This last 104 04/10/11 03:10:20
105 user_B 05/10/11 12:50:30
106 and user_a 07/10/11 13:45:10
107 and user_a 07/10/11 18:22:08

Example of output

User_name From_DateTime To_DateTime Number_Of_System_Uses
This last 10/01/11 00:00:00 02/10/11 23:59:59 2
user_A 03/10/11 00:00:00 04/10/11 23:59:59 2
user_B 10/01/11 00:00:00 02/10/11 23:59:59 1
user_B 10/04/11 00:00:00 05/10/11 23:59:59 1
and user_a 10/06/11 00:00:00 07/10/11 23:59:59 2

Hello

JoeCO wrote:
... I tried the outer join, but did not see the number 0. I'll keep playing with it.

Sorry, my mistake. It was not nearly as simple as I said earlier. JOIN EXTERNAL means that all ranks of the cntr will appear in the result set at least once, but we need every line of cntr appear joining each month and user_name at least once, we can do with a partitioned outer join:

WITH     cntr     AS
(
     SELECT     2 * (LEVEL - 1) AS low_val
     ,     2 *  LEVEL     AS high_val
     FROM     dual
--     CONNECT BY     LEVEL     <= 16     -- Max buckets in any month
     CONNECT BY     LEVEL     <=  4     -- For testing only
)
,     got_month_start     AS
(
     SELECT     user_name
     ,     create_datetime
     ,     TRUNC (create_datetime, 'MONTH')     AS month_start
     FROM     t_usage
)
SELECT       u.user_name
,       u.month_start + c.low_val     AS bucket_start_date
,       u.month_start + c.low_val
               + 2
               - (1 / (24 * 60 * 60))
                         AS bucket_end_date
,       COUNT (u.create_datetime)     AS number_of_system_uses
FROM             cntr            c
LEFT OUTER JOIN      got_month_start  u  PARTITION BY ( u.user_name
                                , u.month_start
                                )
                         ON  ( u.create_datetime
                             - u.month_start
                             )     BETWEEN     c.low_val
                              AND     c.high_val
GROUP BY  u.user_name
,       u.month_start
,       c.low_val
ORDER BY  u.user_name
,       bucket_start_date
;

As you can see, I also moved the calculation of TRUNC (create_datetime, 'MONTH') in a subquery.
I only showed the frist 4 buckets, just to simplify somewhat the exit during the original trial. The result is:

`                                              NUMBER
                                                 _OF_
                                               SYSTEM
USER_N BUCKET_START_DATE   BUCKET_END_DATE      _USES
------ ------------------- ------------------- ------
user_A 10/01/2011 00:00:00 10/02/2011 23:59:59      2
user_A 10/03/2011 00:00:00 10/04/2011 23:59:59      2
user_A 10/05/2011 00:00:00 10/06/2011 23:59:59      0
user_A 10/07/2011 00:00:00 10/08/2011 23:59:59      0

user_B 10/01/2011 00:00:00 10/02/2011 23:59:59      1
user_B 10/03/2011 00:00:00 10/04/2011 23:59:59      0
user_B 10/05/2011 00:00:00 10/06/2011 23:59:59      1
user_B 10/07/2011 00:00:00 10/08/2011 23:59:59      0

user_C 10/01/2011 00:00:00 10/02/2011 23:59:59      0
user_C 10/03/2011 00:00:00 10/04/2011 23:59:59      0
user_C 10/05/2011 00:00:00 10/06/2011 23:59:59      0
user_C 10/07/2011 00:00:00 10/08/2011 23:59:59      2

Display of the process in the list of specific user tracking

Hello
I have a process in which there are several operations to assign tasks to users to complete forms.
I want a specific user in my domain name in order to examine each instance of the process that is launched, but I didn't understand how to achieve without affecting the task to him. I played with task list of access control and properties of delegation and Consultation, adding a specific user or group settings, but always impossible to view the process in its watch list.
Y at - it an option or a workaround for his watchlist get populated?
Thank you

I'm glad to hear it. I was about to update my post. It turns out that I had other search criteria that affect my research. When I removed these I

has been able to launch the research and to see tasks in other queues (assuming, of course, that I had any

Active ACL in the service of the user.)

time of the logged in user tracking

I need to build a simple connection and offer a view of the visitor a clip and then disconnect. I need to store it in a database, how long the user was logged in using ASP. Can anyone help? I can make the connection that I just need to know how to connect in time to connected users.

Store the time connecting in a session variable:

Session ("logintime") = now

Calculate the elapsed time in seconds:

DateDiff ("s", Session("logintime"), now)

the user tracking

When tracing to a particular session to get an error of tkprof

SQL> EXECUTE DBMS_MONITOR.SESSION_TRACE_ENABLE(session_id => 32,serial_num =>191

23,        waits => TRUE, binds => true);

BEGIN DBMS_MONITOR.SESSION_TRACE_ENABLE(session_id => 32,serial_num =>19123,

    waits => TRUE, binds => true); END;



      *

ERROR at line 1:

ORA-06550: line 1, column 7:

PLS-00201: identifier 'DBMS_MONITOR.SESSION_TRACE_ENABLE' must be declared

ORA-06550: line 1, column 7:

PL/SQL: Statement ignored

Hello

DBMS_SESSION. SET_SQL_TRACE (FALSE);

-Pavan Kumar N

Start the LMS 4.2.3 SNMPv3 + tracking users

The user tracking is able to operate without SNMPv2? Recently, I've implemented SNMPv3 on a couple of Cisco 3750 for test the LMS functionality. Given that I removed these switches SNMPv2, I no longer get the IP and MAC address information in user tracking reports. CiscoView, however, works very well using only to SNMPv3. Only some components LMS SNMPv3 are capable?

For the host of the end and other details, you need to configure SNMP v3 context. All other applications also support SNMP v3 on cisco devices supported.

My next disussion has the same problem, please check so useful:

https://supportforums.Cisco.com/message/3960325#3960325

-Thank you

user source expdp
Hi all

How can I determine the user source in a dump file generated with expdp?
(The info not gave using proc GET_DUMPFILE_INFO)

Thank you very much...
The only way I know how to do this would be to do the following.

from your script, you must add another impdp command

Directory of sqlfile = my_sql.sql for = Impdp system/password...
Then you can replace your order of strings with:

grep "\-\-CONNECT" my_sql.sql | grep - v SYSTEM. AWK '{print $3} ' | Head - 1

The v - SYSTEM is the user tracks the impdp command with sqlfile. If you change this, you must change this. You can be able to reduce the sqlfile work if you know what are the types of objects in the dumpfile, but if you don't then running complete work needs to be done.

I hope this helps.

Dean

Non-existing connections in Cisco first LMS 4.2.4

Hello

We had strange connections in LMS 4.2.4 and earlier versions, even back at LMS 3.2.1. Even if I delete connections, they reappear as if the connection were present.

Sometimes, it is related to a change of interface of 1 G to 10G and in some cases, any other device... .but not always.

It hurts my eyes, I look at this, so I hope that some of you know the reason, or better yet, the solution.

Thanks in advance ;-)

Hello

Seems to be corrupted the database for ANI. what I would say is to reset the database to ANI.

Note: ANI database contains no historical data, reintilalizing so there won't be a problem.

the steps are:

1. stop the daemon manager

2.
```
windows:NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
solaris\linux:/opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI3 start the daemon manager to wait for 10-15 min, and then start a new DATACOLLECTIOn followed Acquistion of user tracking.

Hope, he'll take care of the question please - Afroz [evaluate the useful post] *sides encourage contributors *.		   
```

Error: UserManager.setCustomUserField: no sufficient privileges to set a custom field for Publisher

Hello
I'm only able to call UserManager.setCustomUserField with the owner, but not with the Editor (50).
How can I make a custom userfield editable with a user of the editor?
Strange thing is that if I'm in the room Console and change my role of owner in the editor, I can add a custom user field.
Any tips?
PS: Meanwhile, I found this post where it is explained how to implement a custom user Tracker:
http://forums.Adobe.com/thread/840181?decorator=print & displayFullThread = true
It would be nice but if I could value give permission a customfield for the role of the Editor directly on usermanager

Hello

If a user with the role editor, trying to setCustomUserField to itself, then it should be possible. (you try to do this?)

But if he tries to put it other then its not so easy. Is the only option possible, you will have to extend the current UserManager and override the setCustomUserField method.

Thank you

Arun

OBIEE - audit report
Hello

Is it possible to know which users are running more often.

Thank you
Poojak
If you have access to the server, look in the nqsconfig.ini file

Attribute search (Control F) USAGE_TRACKING and look for ENABLED = true or false.

Another way to do it is looking in the database where OBIEE is hanging and see if you can find s_nq_acct table. There are like 3 or 4 tables comes together when the user tracking is enabled.

I hope this helps.

(Mark as helpful if it is considered useful or brand it corrects so turned out to be exactly what you want)...

Best method to track usage of the file by the user?

Hello world

I currently need to look at a method for monitoring of the activities of the file in my organization and I need a little help to get started on the right track. I had some references point me to app Xcode Instrument via the business model of the file, but I currently have issues seeing any activity from users of the real network. to start, I simply set the target to "All processes" with the hope that it would bring together all activities and newspaper, in which he did for everything except users on the network. On mine, I also found some people who use scripts to dtrace or opensnoop, but I was hoping someone could point to what they think, it's the "best" method to track when a file/folder is accessed and/or modified.

Also, as a note, we are in a mixed environment and so we only via SMB as our file sharing protocol in the case where it makes a difference. I know that in newspapers of the server application, it does clearly as AFP titles widely as I can only find small amounts of data for SMB in the newspapers (disconnects / reconnects, permissions, etc.). If I need to flesh out the details as well, this isn't a problem, and thank you to you all in advance.

As with everything, there are a number of ways to accomplish. Manager of the 'better' is one that works in your environment and that you feel comfortable.

You can watch the common criteria framework that is built into OS X. Try checking the man and man audit_control to get an idea of what is possible. If you enable the service, you will record only login, logout, and authentication. However, adding to the indicators you can save the file reads, writes, creates and deletes (most other things). Are you trying to follow everything on local machines or just the server?

Now, if you do this, you'll generate a lot of logging data. The most logical way to handle this is to aggregate the log data into a centralized syslog server. But it of more infrastructure and will pose challenges if you breadwinner and because portable computers that let the environment.

Reid

Apple Consultants Network

'El Capitan Server - Foundation Services.

«El Capitan Server - Collaboration & control»

'El Capitan Server - Advanced Services '.

: IBooks exclusively available in Apple store

How to track users and permits

Suppose an organization has license for 100 users in Oracle R12 HRMS then how oracle keep track of that not more than 100 users are using HRMS, also how a dba keeps track of the same?

Oracle hopes that you will only allow products/modules that you have purchased a license and don't follow these details in the application/database.

Please see license use audit

To contact always your account manager Oracle licensing issues, it is best to answer these questions.

Thank you

Hussein

user tracking

Similar Questions

Maybe you are looking for