Satellite P20-304: change the keyboard, decision problems...

I want to replace the old keyboard with a new one, but I don't know that I should order. I found 2 different types: manufacturer id: K000006120 and K000015440 , but can't decide which one is right, because they seem to be the same?
Post a real question: what is the manufacturer id of the keyboard just for my p20-304?

Can answer this question by a service partner!
K000 numbers appear to be an internal number of Toshiba and, therefore, it is not easy to know what part is compatible or not.
Make a call to the guys at Toshiba service provider allowed in your country and ask for the right part and order.

Good luck

Tags: Toshiba

Similar Questions

  • Satellite A300 - replacement for the keyboard button problem

    Satellite A300 broken my number key 3.
    Easy to fix but still Toshiba have charged me £43 to replace it with a new full keyboard.
    It is less than 6 months old and still under warranty.

    What an absolute joke, I wouldn't have another toshiba again.

    > What an absolute joke, I wouldn't have another Toshiba again.
    Well, it is your personal opinion but I agree.

    However, if you understand something about laptops so you'd know that the single button can not be replaced.
    Only the CAP can be replaced but not the button on the keyboard, and thus the entire keyboard needs to be replaced!

    In addition, the guarantee only covers hardware problems that are not caused by laptop user I n don't know why the button on your keyboard is broken (maybe you was your fault) but I think that you have contacted the ASP in your country and talked to the technician then why you didn't explain that it wasn't your fault?

    In any case, the case should be clear now

  • Satellite P20-304 P43: [b] internal modem problem! [/ b]

    Hi guys,.

    When I click on my connection I see this message: "Error 633...". etc ". I click redial but Error 633is still there and I can not be connected to the web. I checked in my device manager and on the general tab, I read: "this device is working properly." but sometimes (when I face the Error 633) when I click the query modem and it does not show me any Info for my modem...» What could I do?

    Hi George,.

    I suggest you to install the modem again with a small manual! I had found this one here I have the forum!

    1. check if the modem is entered in the Device Manager
    2. check if the modem is configured and that it works?
    The Control Panel must be open and go to the phone
    options of modems and. It should be your modem!
    If it is not shown to you, then you must install the
    modem driver.
    3. double-click on modem and go to the Diagnostics. The
    modem query button queries the commandments with
    check the return signal. This will give you some additional information
    the modem works properly.
    4. then set up a standard dial-up connection to your
    provider of
    5. go in the properties of the modem (Device Manager) and the
    Check the brand in the "wait for dial tone before dialing" has NO
    been resolved!

    Bye Bob

  • Satellite P20-304 - how to remove the BIOS password

    Hi all

    a girlfriend of mine got a Satellite P20 304 with Phoenix Bios.
    She wanted that I remove the Bios password that must be entered directly after the Toshiba start screen.
    So, I entered Bios with F2, went to security, entered the old password and press enter two times to a new blank password.

    The Bios then showed that user password is not defined.
    I saved the changes and started to laptop came out, and asked me again a password.
    Now no entry (only press enter) or the old password works, still displays "wrong password".

    What I did wrong?

    I am a COMPUTER technician, but never had a problem like this.
    This problem is related to the Bios Phoenix or Toshiba? And how to solve the problem?

    Can anyone help? Would be fine, girlfriend needs urgent laptop.

    Thanks for the comments!

  • Satellite P300 - 1DT PSPCCE - how to change the keyboard

    Hello

    I am looking for documentation of disassembly for my laptop.
    I need to change the keyboard. I have 2 letters that are broken.

    Thanks a lot

    Clickservce

    Hello

    Disassembly guides are not for the public, you can download the manual on the official website of Toshiba. I've never seen there other documentation.

    In any case, exchange of keyboard should not be complicated. Just remove the keyboard between the speakers and the keyboard stand. After that, you can lift the keyboard itself but be careful with the keyboard under the keyboard cable. You must remove it also.

    Good luck! :)

  • Satellite M55-S3292: change the American keyboard to the keyboard UK

    Hello world
    I bought a M55-S3292 so that in the United States, and now he had trained in the United Kingdom.

    Is there anyway I can convert the US in UK keyboard.

    I know that I can change the input language, but then the keys are not correct to their brands.

    Can buy you single replacement keys, IE, the number 2 key that also moves to ' symbol and the number 3 key moving also to the symbol£ a.» If yes where can I get.

    Thanks for any help.

    Neil

    Hello

    No, it of not possible to change the individual keys. What you can do is to change the entire keyboard of the American provision in UK available. Compatible keyboard, you can buy from the Toshiba service partner in your country.

    As you say, you can change the keyboard input language.
    If you put WE change to the English of the United States. In this case, you could type the right keys.

  • Satellite P20-304 stops unexpectedly

    I have a laptop satellite P20 304 coming sometimes turns off without warning.
    The screen goes black and the power is off.

    This sometimes happens during a search, but alos is writing a letter. If not necessary a high workload for the laptop.

    Opening vents are free etc. I guess maybe an overheating problem, but wonder if this causes this kind of stop procedere.
    Also - there no poping blue screen or report failure upwards by re-start such as "the system will be re-stored after a major system crash ect.

    No idea what it could be.

    I installed Sandra Sisoft to monitor the temperature, but it only shows me no module to control the temperature,
    respectively, that it does not work.

    My warranty runs out in June, so I want to make sure that I can claim any defect prior to that.

    Thnaks for any input,
    concerning
    Birgit

    Hello

    It's not very easy to say why this laptop stops. It could be an overheating problem or a malfunction of the software. But I tend to overheat.
    Well, the problem of overheating occurs due to her malfunctioning fans or malfunction of the equipment.
    I assume that your warranty is valid, so I recommend you to check your laptop in service partner. Maybe, it can give you a good answer, why this problem occurs.

  • change the keyboard from English to Korean and addition of Greek and Hebrew to the version of Word 97.

    My wife has a new laptop Lenovo with windows 7 and we tried to change the keyboard to add Korean, and we cannot.  On prvious Windows on the older PC operating system, it has allowed this and all we had to do was to toggle between the two.  My wife is Korean and wants to send emails in Korean to family and friends here and in Korea.  Was able to do so until the new laptop.

    I'm having a hard time getting Greek and Hebrew and Latin spelling, even if I checked to make them work, they do not.  I have Vista Premium on my Toshiba PC.

    Hello

    ·        Have you installed the Korean language on the system through Windows updates?

    I suggest to install the Korean language through Windows updates, then select the language for the keyboard layout and check.

    How can I get additional language files?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

    Once you have done the installation of the language pack, add it to the keyboard layout, and then check to see if your wife is able to type in the Korean language.

    Add an input language

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-an-input-language

    Change your keyboard type

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-keyboard-layout

    It may be that there is a problem with the version of Microsoft office Word 97. This is a very old version and the last is Microsoft office 2010, I suggest you to uninstall Microsoft office Word 97 from the system and install Microsoft Office 2010. Click on the link below.

    http://Office.Microsoft.com/en-us/products/

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I need to change the keyboard on Tecra M5

    Hello

    I need to change the keyboard on a tecra m5.
    Unfortunately, this is not mentioned in the manual how to do this.

    Please advice.

    Thanks in advance for your help.

    Best regards
    Wim Gijsels

    Hello

    I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

    In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

    As you can read it's not that complicated and I hope I could help a bit! :)

  • How to change the keyboard on Tecra S

    Hello

    I need a little help to replace my broken keyboard.
    I have not found any procedure here or in the user guide.

    Who is screwed, I have to remove to change the keyboard?

    Thanks for your help

    Yves

    Myself and others here are not clairvoyant so maybe you could post your model of laptop. ;)

  • How can I change the keyboard on Portege R500?

    Hello everyone,

    I get a Toshiba - 10J Portege R500, with the QWERTY keyboard.
    I want to change it with the QWERTY keyboard, because I usually use the French.

    But I don't know on the net the explanation or detail to achieve this.
    Someone get some photos or some tips to change the keyboard on this laptop.

    Thank you

    Do you want really to replace by yourself and lose the warranty?
    The Portégé R500 is a portable large company and I think that it s not the cheaper one.

    In your case, I would not risk losing the warranty.
    So ask the Toshiba service provider in your country for a keyboard layout AZERY-compatible and for replacement.

    I think that it s safe.

  • How to change the keyboard on Portege M300-101?

    Hello

    I have a Portege M300-101, and I would like to know if there are instructions online for how to change the keyboard itself. Our unit comes with, I think, a Belgian keyboard installed... and a U.S. keyboard in the box. Are there instructions available for how to move on the keyboards? Also, I guess it's a good idea to switch the keyboard before turning on the laptop for the first time. Do you agree?

    Best,
    Dainis W. Michel

    Hello Danis

    Unfortunately there is no public document on this subject. You can try to do it alone, but please don t forget that on this guarantee valid path will be cancelled. Basically, the replacement of keyboard is not well complicated and technicians may need 15 minutes to do.

    In my opinion, you can take a risk and pay for replacement before losing the valid guarantee. The Portege is very expensive and of damage to property, it is very risky to be unsecured.

    If you still think that you do not write anything again.

  • Edge E320 - change the keyboard and add an mSATA SSD

    Hello

    I have an E320 of edge with I5 and 8 GB of DDR3 memory.

    First of all I want to change the keyboard which is English - UK, and I want an English-United States. Can you direct me to a link where to find parts of edge? I'm from jahpang.

    Second question, can I add an SSD slot mSATA and keep at the same time the five 7200 RPM for storage and change the boot on the SSD drive.

    I found this link: http://support.lenovo.com/en_US/downloads/detail.page?DocID=PD015155

    so I think that it is possible, but I want a confirmation. and I found this SSD and they know E320-compatible:

    http://www.mydigitaldiscount.com/mydigitalssd-128gb-50mm-bullet-proof-mSATA-SSD/

    Thanks in advance,

    Mihai

    Hey ciurica,

    Welcome to the forums.

    the part of the keyboard, get in touch with our team of service in this regard.

    http://bit.LY/LNVsuppNum

    with respect to the SSD, yes you can. Once you have it installed, you can change the bios startup sequence.

  • Where is the option to change the keyboard shortcuts in AE?

    Hello

    I am very pleased with Adobe After Effects, but how is it still possible that you can not change the keyboard shortcuts in the application? ! Adobe is well known for making very friendly interfaces, then, how is it possible that such a simple command is not the EI? There is a good chance that he will change?

    Best wishes

    Michal

    You can change the keyboard shortcuts. You are editing a text file. You can find the file by opening the Preferences dialog box and reveal in Finder/Explorer the button at the bottom of the General category.

    If you want to make a feature request, you can do so here:

    http://www.Adobe.com/go/wish

  • Change the keyboard shortcuts for zoom

    Hello

    When you look at the keyboard shortcuts for MAC, the 100% zoom is broken as alt '0' of the command, and yet it is displayed in the drop-down list as 'n'?

    Screen Shot 2013-05-01 at 16.37.49.png

    Is it possible to change the shortcuts. The 100% zoom was simply command (apple) page '0', which is now fit to.

    Can someone help with how to change shortcuts, please?

    See you soon

    G

    The shortcut by default to zoom to 100% should be command + 1.

    You can change the keyboard shortcuts in the Edit (Command + Option + SHIFT + K)

Maybe you are looking for