Users capture EMU settings questions

Similar Questions

• How to make a slide to wait until the user has answered a question correctly, even after activation of a smartshape?

  Background:

  I created a questionnaire in which the user must answer each question correctly before to proceed to the next slide. That's what I did:

  
  

  • Set preferences Settings > required > respond to everything - the user must answer each question to continue
  • Set the number of attempts at the level of the question to infinity
  • Made the Next invisible button and disabled the PlayBar

  In this way, the user can proceed to the next slide in the issue with the submission process - and, since attempts are endless, this means that after having answered the question correctly.

  Current objective:

  I want the user to be able to click on a prompt for a hint. To configure this, I did the following:

  • Created a smartshape titled 'click_for_hint' to display the text that says: "click here for a tip.
  • Created a smartshape labelled 'hint' text display
  • Show "hint" success value "click_for_hint".

  Now, when the user clicks on the text that says: "Click here for a hint," the suspicion appears. So it works - great! However, once the indicator is activated, I would like to for the user to continue endless attempts until respondent correctly to the question... and then only after answering correctly, proceed to the next slide.

  The problem:

  If the user has submitted one or more wrong answers, and then activates the indicator, the slide just waiting until the user has answered the question correctly. Instead, it will be set in playing, proceeding to the next slide. I tried the smartshape 'hint' to take a break on the success of adjustment, but it does not work.

  Is there a way to make the slide to wait until the answer to the question correctly before moving on to the next slide, even after the indicator has been activated?

  Are you aware that your required parameter can cause problems, the blocking of the user? It is also completely useless because you have unlimited attempts at the level of the issue and hid the next button (hope, you don't need review, otherwise, I would recommend not to hide this button but slide it under the Clear key: the Question slides in Captivate - Captivate blog)

  The index problem is related to the fact that a simple gesture going out of reading. I would like to see the timeline of the slide, to compare the points of suspension form and the question slide button. And maybe this blog can also clarify difference between simple/advanced: Why choose Standard Simple action?-Captivate blog

  Regarding the buttons on question slides form: buttons on slides of Question/Score of Captivate 6?-Captivate blog

• How to capture language settings by using the Sccm 2012 task sequence.

  Help, please

  I want to capture language settings by using the Sccm 2012 task sequence.

  for example, if I push the task sequence on a computer through the software Center... He must capture the machine language first, and then format the machine and then restore back language settings... I'm not sure if USMT capture language using the task sequence settings... could you please help and let me know if any solution for this

  Thanks in advance

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Change XP user account control settings

  Disable user account control and perform a clean boot

  Disable user account control.

  1. click on Start.

  2. click on Control Panel , and then click user accounts.

  3. click on change user account control settings.

  4. scroll the bar to the bottom, where it says never notify.

  5. and then click OK. Restart the computer.

  When I click on user accounts, there is no option to click on change user account control settings

  UAC was introduced for Vista. What makes you think that it is available in XP?

• The Windows 7 user account control settings does not open

  Hello

  Someone knows a problem where a computer launches the application "change user account control settings?  We are dev work on multiple PCs and need to disable this feature.  Normally, I would run the UAC and just drag the bar down, but I can't even the application to load.  I even tried running: C:\Windows\System32\userAccountControlSetings.exe and it does nothing.

  Thank you
  Sean

  Well, I was not able to understand why the window UAC doesn't appear, however, I managed to disable UAC via the local policy settings.  For reference purposes:

  1. Start > run > gpedit.msc
  2. Computer configuration > Windows settings > security settings > local policies > Security Options
  3. Then define:
  4. User account control: behavior of the guest of elevation for administrators in Admin Approval Mode – set its value toElevate without asking for confirmation.
  5. User account control: detect application installations and prompt for elevation - set its value todisabled.
  6. User account control: only elevate the UIAccess applications that are installed in secure locations - set its value todisabled.
  7. User Account Control: Run all administrators in Admin Approval Mode - set its value todisabled.

  Sean

• Export user group security settings

  Hello

  Does anyone know of an orderly way to export / retrieves the user group security settings configured? Would really help if we could see some of our user groups with a comparison side by side through export.

  Greg

  Hello

  Lol there is no way to export the settings of user group.

  You can download user, user to download you can check the history of product, checking for registered users, but there is no way to export the users group.

• Follow-up of the time users spend on a question

  Is it possible, and if so, how, to follow how long a user spends on a question?

  Thank you!

  Hello

  I can point you to one of my blog posts?

  Quiz, indicating the elapsed time

  This could be a starting point, I don't know if that's what you're looking for? It stores the time in a user variable, you probably want it to be exported to?

  Lilybiri

• that allows standard users change ppp settings, removing UAC admin fast pwd to DPIscaling.exe

  I am currently using windows vista ultimate 64-bit with an installed nvidia geforce 8800 gtx card. I'm the ADM on the machine, with the standards users who connect it. My account of adm does not have the problem. I'm trying to find a way to allow standard users on the machine to have the ability to change the ppp settings.

  The path of the file is C:\Windows\System32\DpiScaling.exe

  I tried to use the solution listed on this site: http://blogs.techrepublic.com.com/window-on-windows/?p=635

  and used the Application Compatibility Toolkit.  I used a lot of different options, the 32-bit version, 64-bit, different boxes, without success. When you click right on the file properties and click on the Compatibility tab, it says:
  Cannot be set on this program compatibility modes because it is part of the Windows version.

  I have a standard users also granted full control of the executable, and if the logged-on user account, he got always invited him to enter the administrator credentials. I understand that this only gives the user access to the file and not what the file does.

  I need to find a solution to allow standard users on the computer to change the DPI settings without the need of the admin password.  While looking for solutions here and on the site of regular microsoft (support.microsoft.com) support, all I could find are methods that disable the guests of UAC elevation and ways to disable UAC completely.    http://social.answers.Microsoft.com/forums/en-us/w7security/thread/0364515a-301e-47C5-AF99-39347b83c6b4-je don't want to do that.  I even tried and the standard user has always invited to enter an admin password.  I don't want to disable UAC or the guests of elevation, surprisingly these guests don't mind.   The computer is set to high resolution and need to continually change the DPI setting to enable the second monitor (my HDTV) text output in a format that is clear and correct.  The reason why we have change back is because the cursor of the mouse in the PC video games being played here on disappears when the DPI is set to what higher than normal / default. So before any game is played, the DPI settings in windows settings must be changed to the default / normal.

  Since I was the user only administrator on the machine, I am concerned when other users would like to play their games. but can not, because I am not present.  I want to be the only Admin account on the machine.  Bad things tend to happen when I allow other users are administrators on the machine.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the security of Windows Vista on TechNet. Please ask your question in the TechNet forum.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I limit some users to a particular question pool?

  I have 2 sets of learners who will be tested on a content different slighty in the same course of Captivate. How can I restrict the set of users to a set of questions?
  Thanks in advance.

  Hello

  What Captivate version are you on?

  Are your users aware to what group they belong?

  If it is 6 +, then rather than using two Question pool. You can create a Question of pre-test, ask questions about their GroupName (say A or B)

  And A choice you can create a branch to a set question and B, you can lead to another. (Select make-'branch to the current' Quiz - preferences settings-)

  You may need to refine it. But it would then depend on doing what the user chooses and the dynamically the course will line up for their group of Question.

  Thank you

  Anjaneai

• Factory restore settings questions

  (I think it is better to explain why I want to do but if you just want to answer my questions restoration, feel free to skip the next paragraph. (Thank you.)

  I currently have El Capitan and wanted to reinstall can Windows partition because I want more space, but after deleting the partition and set up the new partitions, I came across some problems during the installation of windows, in which he said that the drive was GPT partition or something like that. I've lost 3 days trying different solutions in various sites, including this and have yet to make it work so I decided to just restore my Mac for its original OS and reinstall my Windows then just upgrade to El Capitan again.

  My questions are:

  1. it would be the first time that I do this, but from what I've read and watched, what are the exact steps to restore my mac to its factory settings?

  a. restart the Mac.

  b. hold the cmd + r

  c. Select utility disk under the window utility for OS X

  d. Select the partition (Macintosh HD)

  e. clear it for OS X (journaled)

  f. utility disc close

  g. click on reinstall OS X under OS X utility window

  h. click on continue

  i. choose my drive

  j. click on install

  2. what would be the OS X installed on my newly formatted partition? Would it still El Capitan (my current operating system before formatting) or Mountain Lion (the operating system original on my Air mid-2013)?

  1. who are the instructions for a method of creating a new installation of operating system of the computer current in Leo or newer. Any process of creating a vacuum volume can be used instead.

  2. El Capitan. To reload the original operating system, press Option as well in the second step.

  (142795)

• Can I reset user ID/security settings on drive C

  Hello

  I have changed the security settings of the user on my C drive but I think I erased too well:(et maintenant je ne peux pas accéder à internet.)  Can I reset this?  If this is not the case, what can you advise me to do?

  If you want more information please let me know.  I have Windows Vista.

  Thanks :)

  You did changes in the connection on Internet Explorer options tab?

  You can try the food options and reset in the Advanced Settings tab.

• Cannot change user account control settings.

  Original title: user account control problem

  I am not able to change(on/ff) the way, I do not know how it is fixed in mode, now when I click on it, nothing appears. If I try to use other methods, I get a msg saying that I need adminsit control system, but I'm only the adminst in mine.

  Thanks, I had the problem fixed, wen in safe mode and changed the settings it it worked

• Need to change user account control settings, but cannot access (windows 7Prof.-64 bits)

  Hello

  With Windows 7 Professional 64 bit laptop

  I am the 'Standard user' and the only user of my laptop.  I don't know if I have an administrator account.  I could have or something with a similar name when first setting up laptop and loading Windows program (a few years ago).  But I remember he was causing Windows always show both accounts and choose one to log-in to.  I didn't want no choice since I am the only user of the laptop, so I understood how to make to get rid of the other account (admin?) and kept the Standard user because 'Help' instructions, said it should be used.

  There are so many programs that I can not open because the user account control box "do allow you the following program to make changes...?   The choice of 'Yes' is NEVER highlighted or available - that the choice of the 'no' can be clicked.  And the same dialogue box asks also but it is not a place to type the password "Administrator".  I don't even have a Director. Password, or a password to the Standard user account.

  And I am referring to all kinds of programs that can not open, as "Windows Malicious Software Removal Tool" that I downloaded from the Microsoft Web site.  Or I went into control panel 'User account', but try clicking on 'Change settings User Account Control' brings the same view, "do allow you the following program to make changes to the computer?  Or when, on the page of computer system, I can't access 'Advanced System Settings' due to the same dialog box.

  How to solve this problem?  I'd rather not have the choice of Auditors when Windows opens.  I looked through other similar topics here (only Windows 7 partners), and some seek to make changes to the registry.  It's very intimidating for me.  I'm not a computer scientist at all, but fairly intuitive with the computer.  The problem cornered me.  Another opinion on a thread is said to use "Fix It".  This program is no longer available (we now 2016).  I also experienced this problem all this time but am pretty frustrated and wanted to try the job.

  Should I re - load the Windows program and do something else?

  I hope someone can provide some less intimidating process that touch the registry to fix this.  I really appreciate it.

  Thank you!

  Massachusetts

  I could have or something with a similar name when first setting up laptop and loading Windows program (a few years ago).

  -> Yes, you did.

  I understood how to make to get rid of the other account (admin?) and kept the Standard user because 'Help' instructions, said it should be used.

  -> It was a bad decision. It was equivalent to throw out your safe master key. There is a much better method to avoid the choice between multiple accounts.

  I don't even have a Director. Password, or a password to the Standard user account.

  -> You had an admin password when your first install Windows.

  I'd rather not have the choice of Auditors when Windows opens.

  -> It takes 30 seconds to remove this choice, without loss of the admin account.

  Some seek to make changes to the registry.

  -> Hacking the registry does not restore your account admin. 'Fix It' will not fix it either.

  Should I re - load the Windows program and do something else?

  -> Your first step must be to determine what accounts you have and whether they are active. It is done as follows:

  1. Mark the first line of code below with your mouse, then press Ctrl + C to copy it.
  2. Click the Start button, press Ctrl + V to paste the code in the run box, and then press ENTER.
  3. Marks of the second line of code below with your mouse, then press Ctrl + C to copy it.
  4. Click the Start button, press Ctrl + V to paste the code in the run box, and then press ENTER.
  5. Open the desktop Accounts.txt file, then copy & paste its contents into your answer.

  cmd.exe /c users > '% userprofile%\Desktop\Accounts.txt '.

  cmd.exe /c net localgroup administrators > '% userprofile%\Desktop\Accounts.txt '.

• Try to copy the corrupted user profile profile settings and I am met with the error message "too long file name!

  I tried to connect to my laptop today and instead of recording in the usual way a message that windows creates new office settings. When he finally connects me I get a message of bubble speech saying I was connected to a temporary profile, I reboot several times and the problem persists. After a little google research, I realize my old profile is probably corrupted... I have not downloaded a new software/hardware.

  I followed the steps of miscrosoft to copy the files from my old profile to a new user, everything in the file transfer went well until the last few files to copy. Then, I get this error message saying "the file names would be too long for the destination folder", only two options are cancel and skip available. Which are useful.

  I do not recognize these folders that are too long (the names are the random letters and numbers), I tried to look for them, nothing is done. And to be honest, I don't understand what that means.

  UPDATE: I decided to copy folder a bit at a time and it solved my problem, that all the files were copied successfully. However, now I was struck with a new problem. Whenever I try to access my files, I get a message that says windows cannot access the specified device, path or file. You may not be authorized appropriate. How can I fix it?

  
  

  It comes to my laptop and I administer it / have access to passwords, etc.
  

  It simply means that your old account was the owner of that file or folder.  You can change the security to access your new account.  Here are the instructions: http://windows.microsoft.com/en-PK/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  (It says Vista, but the steps are the same for 7).

• What is the unknown user with a red question mark next to it.

  When I click on a file > properties > security I get an unknown user who has a red question mark next to it.   It appears only in my stuff important such as my documents and all my backups. It is not there in my pictures or my music. Can someone please enlighten me, as I think someone may have access to my PC.

  When I click on a file > properties > security I get an unknown user who has a red question mark next to it.   It appears only in my stuff important such as my documents and all my backups. It is not there in my pictures or my music. Can someone please enlighten me, as I think someone may have access to my PC.

  It is quite normal to have tags to users that may have existed in the past, files. They have no effect unless there is a corresponding account. What counts is what the user accounts exist on your computer. Have you checked those?