using a different Adobe during the renewal of the CC account

Similar Questions

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• use two different characters in the same domain

  Hi, how to use for different fonts in the same field?

  unless "crush you" painting: you do not have.
  If you do, you can use graphics.setFont

• How to use several different sections of the same clip in the timeline?

  Hey, I used this tutorial as a reference for editing. I have my own equipment I want change, which includes several takes different. Is it possible to use several different sections of the same clip in the timeline? You know, like the good part of a certain record keeping. I appreciate any assistance. Thank you

  Post edited by: Kevin Monahan

  Reason: changed the title of best research opportunities

  I prefer to put the clip in the Source monitor Panel, then set the points and exit. From there you can simply drag the section of the element in the sequence.

  Or, you can make a subelement, the section will have a distinct element in the bins in the project Panel. You should always keep the original material, but now you can have real subitems to work if you prefer.

• Green flash player from Adobe during the video playback screen

  Hello

  
  I get this green screen when I play videos on my IE9 browser on a desktop computer Win 7 (64-bit). This Green screen during playback of a video that uses the Adobe flash player (version 11.5.502.146), but it happens only after the first part of the video (entire video is already loaded) is played and the rest of the green screen video and plays accelerated, as if she was fast forwarded. The audio of the video is also affected as he plays static of different frequencies.
  The videos that I watched come from http://xin.msn.com/ and http://www.youtube.com/. I also tried to solve this problem with disabling hardware acceleration in flash player menu and uninstall and reinstall and then restart the computer, which are both different attempts that did not solve the problem.

  Help solving this problem on site will be greatly appreciated.

  Thank you very much

  Please try the solution described in the post below and let us know how it works for you.

  http://forums.Adobe.com/message/4865912#4865912

  Thank you

  Chris

• using a different material of the same type

  Hello

  I wrote a code in LabVIEW and data acquisition that I pointed out where the signal will be sent to the and where it will make the acquisition of. I use USB6009.

  It turns out that when you use a different USB6009 the program will not work because it has a few other serial numbers. I need to configure the program for EACH DEVICE no matter if the appliance is of the same type?

  How about exe? Suppose I want to send a package to someone away who has same device type but of course physically different?

  (this is a basic type question but I'm always hard to find answers to my questions generally find manuals and materials to get a good point of departure-> a novice can really get lost)

  
  

• How to run two 'County of buffered edge' using two different counters at the same time?

  Hello

  I try to use two counters at the same time count the TTL pulses for a fixed period (lets say 10 ms). I have the card PCI-6251 and PCI-6601. I am currently using PCI 6601 as counters and running a self updated the ' stamped edge County - reset.VI. Here, I have attached my VI.

  Now, during the execution of this VI, I get an error saying "error-200251 occurred at Task.vi:4 DAQmx Start" and the possible reasons are, "measures: no USB or DMA channels in loose ends are available.»

  Either stop other tasks which might be using these resources or are considering changing your mechanism for transfer of data to the interruptions if supported.

  Device: Dev2

  Task name: _unnamedTask<80>. »

  What I realized is I'm trying to use two buffers for two meters with ten samples each and this is probably not allowed. I don't know how to solve this out and bad looking for your suggestions.

  Thanks in advance.

  Hi all

  I found a solution too. This is the VI updated the "County of edge stamped" which can simultaneously run two entries-meter using a single source of door and it also uses the DMA and interrupts to save two pads.

  Have a nice weekend.

• How to use two different versions of the stub of Web Services SDK files in a single project (5.5 and 6.0)

  Hello

  I have a project that uses the vSphere 5.5 management SDK (I built the stub files according to the documentation) and have these in my c# Solution. Everything works beautifully. My class files that interact with vSphere all have a use statement as follows:

  using Vim25Api;

  All fine so far.

  Now, I want to be able to provide support for a user to connect to vSphere 5.5 and 6.0 vSphere environments. I built the stub files for vSphere Management 6.0 SDK and those in my solution presented in a separate project. Each project is based on a different class library and I have each set of files for each version of vSphere stub in different NuGet packages. However, when I select to use a vSphere 5.5 connection, it seems that internally the 6.0 files stub are used, or vice versa.

  I tried to separate things out by giving the Vim25Service.dll and Vim25Service.XmlSerializers.dll files for each version of alias names (alias by default for all assemblies is "global", but I changed it to vSphere5 and vSphere6 for each version. Then at the top of each class file before all with what I'm doing:

  extern alias vSphere5;

  or

  extern alias vSphere6

  (According to what project I'm in). Then, use the using statement for each class file that interacts with vSphere using vSphere5::Vim25Api; or using vSphere6::Vim25Api; to use the files to correct/stub namespace for each version I support.

  However this still doesn't seem to work, and things seem to be getting confused upwards somehow. I take a guess that internal files make calls and somehow have crossed.

  Is it possible to use two stub version of vSphere together different files in the same project? How should I handle my script? I thought of just upgrading to use the version of vSphere 6 (I can always connect to vCenter 5.5 using these, but some of the properties on the object have changed, (for example some dynamic properties on AlarmObjects and other items have been removed and code breaks if I delete the references to the stub vSphere 5.5 files.) So, I want to keep two different versions and use each of them separately in the same solution, so I support vSphere 5.5 and vSphere 6.

  Solved - this using wsdl.exe and just by specifying a different namespace to use in the proxy class that is generated by using the /n switch.

  for example using PowerShell to build automatically, the value $VimApi and do:

  WSDL.exe/n:$ VimApi...

• Control mobile/data files to a different folder during the upgrade to 10 g 9i

  Hello
  
  I'm in the process of upgrading 9.2.0.4 (Enterprise Edition - linux Redhat 4) on the same server to 10 g R2.
  
  I already finished running DBUA, but due to the bug MAXDATAFILES 100, I had to choose not to move the data files. Now that the upgrade was successful, I need to move the controlfiles, 10g 9i Home Home data files.
  
  I know I need to recreate the controlfile to support up to a trace file, but I'm confused as to what script should I use trace files because it has 2 almost identical scripts. One with RESETLOGS, another with NORESETLOGS.
  
  What is the difference between these two? The 9i database was arrested before the upgrade and supported (cold backup), whether I should not all archivelogs or online content of newspapers I think.
  
  Thank you
  Sinan

  I know I need to recreate the controlfile to support up to a trace file, but I'm confused as to what script should I use trace files because it has 2 almost identical scripts. One with RESETLOGS, another with NORESETLOGS.

  What is the difference between these two? The 9i database was arrested before the upgrade and supported (cold backup), whether I should not all archivelogs or online content of newspapers I think.

  RESETLOGS - Specify RESETLOGS, if you want the Oracle database to ignore the content of the files listed in the LOGFILE clause. These files do not have to exist. Each redo_log_file_spec in the LOGFILE clause must specify the SIZE parameter. The database assigns redo all online log file groups to thread 1 and enables this thread for public use by any instance. After using this clause, you must open the database by using the ALTER DATABASE statement RESETLOGS clause.

  NORESETLOGS - Specify NORESETLOGS if you want Oracle database to use all files in the LOGFILE clause as they were when the database was last opened. These files must exist and must be the online redo logs rather that restore backups. The database reassigns log files groups redo the nets to which they were previously allocated and reactivates the discussions that they have been previously activated.

  CREATE CONTROLFILE
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_5003.htm#SQLRF01203

  If you AutoConfig enabled, you can use quick Clone to achieve the same.

  Thank you
  Hussein

• Different users calling different numbers for the same account

  Hello

  As a society, we have a single account which allows us to make phone calls. We know that more than one user, we can access the same account at the same time, however, could both users make calls at the same time? I mean the different calls.

  Example:

  The user has call + 39 02xxxxxxx

  User B calls + 44 95xxxxxx

  (both at the same time)

  Thanks in advance!

  Simone

  Hi, Simone1984, and welcome to the community,

  I recommend a careful review of the conditions of use of Skype and the policies of fair use for subscriptions, according to these apply to your business:

  • http://www.Skype.com/en/legal/TOU/
  
  
  • http://www.Skype.com/en/legal/business-TOU/
  
  
  • http://www.Skype.com/en/legal/fair-usage/

  If I were an anti-fraud filter and I detected mulitple calls taking place at the same time, I would immediately take action, thinking that the account has been abused...

  Kind regards

  Elaine

  __________________________________________________________________________________________________
  Your question has been answered? Please click on the link to accept as a Solutionfor everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations!
  Reliable information: Brian Krebs: 3 basic rules for online safety

• How to access different Skype with the microsoft account accounts

  Hi, I'm trying to connect to my Skype Windows 8 business account and the app requires me to enter my account from microsoft to get into Skype. When I put in my microsoft account, it creates a new personal account automatically and I can not change user to Skype my Skype business account. Is it possible with windows 8 to access Skype without a microsoft account? If not, is there a way to switch accounts once I put in my microsoft account? Thank you.

  Hi Steve,.

  The apps will be the user account that you used to connect to your computer in Windows 8. Here you have two options with you. First of all, you can stop using the version of the Skype app and start using the desktop version of Skype. It will give you the option to enter in your account and your password. With you, the second is to create a new user account with your company account and then sign in to access Skype.

  For help I suggest to post the question on the link below.

  Skype Community

  http://community.Skype.com/T5/English/CT-p/English?profile.language=en

  Feel free to write us if you have any other questions about Windows.

• Cannot use laptop computer Microsoft on the new account.

  I have a month old acer aspire v7-582pg, and I've never been able to link my Microsoft account. Whenever I add my Microsoft account, I get a message saying: Please wait that doesn't go away after putting my password in. I end up having to delete my account and create a new one without an attached e-mail. I tried to link several times, but continues to be the same thing. Any ideas would be much appreciated.

  give a check here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-hangs-on-please-w...

  It seems a problem with skydrive aka onedrive:

  1. connect to the affected account
  2. Press the Windows key + L to lock the computer
  3. Switch to a user who has administrator privileges account
  4. Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
  5. find restoreoptin.exe & end task this process
  6. return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
  7. Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
  8. Select Skydrive
  9. Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
  10. logout and log back in
  11. you will be asked is no longer with the blank screen 'Please wait '.

• Can I use scan interface mode during the collection of the data of cRIO? How to view the data collected continuously on a waveform graph?

  Hello

  I intend to use cRIO as a standalone device to collect certain data off a tachometer House.  My goal is to store the data in the cRIO chassis, since it has its internal memory, but I can't even a cluster of data of the analog inputs of its devices.  I dragged and dropped the channel I collect data in a while loop, but it is only a point.  I want to see the data from the different time, what should I do?  Is this possible in Mode Interface Scan?  If Yes, could someone give me a simple example that shows streamed on a waveform data?  I would be very grateful!

  
  

• The values of different session during the passage of &amp; APP_SESSION. as a parameter

  Hi all
  
  I use APEX 3.1.1 and have the following problem: I have a JS function in my application, which generates a URL by using the provided parameters. His signature might look like:
  
  function xxx (p_param_item, p_session, p_app_process, p_app_id)
  
  Yes, I use this to call for a process on demand application (AJAX magic ;)
  
  The problem is that when I call a page using item & APP_SESSION. for the 3rd parameter, it seems that for some reason JS receives a different value (I checked myself put an alert and displays the value of the parameter and the & APP_SESSION. string substitution).
  
  I know will say you: + "then why don't you use & APP_SESSION.» Instead? "+ but the thing is, my JS code in a separate file, and for some reason, APEX does not replace this string on this separate file.
  
  Then... of suggestions? Ideas? New approaches?
  Thank you all in advance for your help.
  Kind regards
  
  A & iacute; Prom

  Hello

  In an external file, you can use-

  $x('pInstance').value
  

  or

  $v('pInstance')
  

  (depending on your version of APEX)

  to reference the value of the current session.

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!