using a NVidia GTX770 with XW8600 workstation

Similar Questions

• XW8600 Workstation (Windows 7 ultimate) time is lost and don't synchronize only not with internet...

  I just bought the week there are HP xw8600 Workstation rental.

  My clock is waste of time every time I have to synchronize with the internet but after that is to keep wasting time not mater runs.

  I changed the COMS battery but the problem is still there.

  I installed Windows 7 ultimate 64 bit, I checked the BIOS version is V01.32. I thought that may be the version is old, but I found no drivers for Windows ultimate y. BIOS I also tried to uninstall and reinstall the real-time clock, but always the same status.

  I would be grateful if someone can help me.

  Thank you.

  Hi Erico,

  After that I ran HP provided utility diagonistic

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3432827&prodNameId=3432828&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=wk-66836-1

  I found the two failuer suite and the recommendation below.

  1 Package 1 processor (take 1, Core = 4) - real time clock
  2 processor package 2 (Jack 2, Core = 4) - real time clock

  Description is as follows;

  Impossible to update CMos time intel Xeon processor, ran on CPU 0

  It is recommended to change the motherboard. Please provide us with a retail price of the motherboard.

  I sent it to HP on HP replace my motherboard; that solved my problem.

  Erico thanks for all you help.

• Can I use a 4K screen with my iMac "end of 2012?

  My iMac (13.2) is a 27-inch end 2012, 'Core i7', which has a GPU Nvidia GTX 680MX 2048 MB. I'm interested in using a '4K' monitor with it, as the 'Dell Ultra HD 4 K monitor P2415Q

  It's that Apple supports 'officially' in terms of 4 K:

  With the help of 4K and Ultra HD TVs with your Mac - Apple Support screens

• Can satellite P500-12D - I use the nVidia drivers?

  The latest NVIDIA drivers on update from Toshiba website are 8.15.11.8642, but there are newer versions on the NVIDIA site. I would like ot update the NVIDIA drivers but I have any difficalties.

  I tried to install version 195.62 (Win7 64 bit) for the Geforce 200 M series fron the NVIDIA SITE but installation is not complete. I get the message: "Setup NVIDIA didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »

  Toshiba only allows their own versions of the drivers? Is there a way to enable the NVIDIA drivers to istall?

  SYSTEM INFORMATION: operating system WINDOWS 7 64 bit
  Date 03/01/2010 01:14:58
  [Information on PC]
  Model name SATELLITE P500 12D
  Part number PSPG8E-01D007EN
  Number of series x
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V2.50
  Processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 749,744,054,272 [bytes] 698.254 [GB]
  Capacity of the hard drive space free 644,687,319,040 [bytes] 600.412 [GB]
  Video * NVIDIA GeForce GT 230 M * version = 8.15.11.8642
  Screen resolution 1680 x 945 Pixels
  Color quality, true color (32 bit)
  Version of NVIDIA High Definition Audio sound = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Conexant Pebble high definition SmartAudio version = 4.98.6.63
  Network version Atheros AR8131 PCI - E Gigabit Ethernet Controller = 1.0.0.17

  MAC address = 00:26:9E:90:F3:E7
  Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  version = 2009.1.1222.2009 = 00:26:B6:9 A MAC address: 1E:2F
  No modem
  Internet Explorer 8.0.7600.16385
  Device IDE TOSHIBA MK5055GSX
  IBG 4H6Z0XEVG SCSI CdRom Device = 1.03 FW version
  HL-DT-ST DVDRAM GT20N FW version = tm10

  [Information QFE]
  Windows security update "KB973525.
  Windows Update "KB974332.
  Windows Update "KB974431.
  Windows security update "KB974571.
  Windows Update "KB975364.
  Fix Windows 'KB975467.
  Windows Update "KB976098.
  Windows security update "KB976325.

  Hello

  Counter question: why you want to use any other display drivers? Are not satisfied with the drivers of Toshiba or can you notice problems in Windows?

  Theoretically, it is possible to use the nVidia drivers directly but don t forget that they are not pre-tested on your laptop. Your graphics card could be overheating and so you lose the warranty.

  Satellite P500 is fairly new, so I guess that Toshiba updates the display driver in next time too. Take a look at the page from time to time. ;)

• How to use card NVIDIA on the Satellite P875-321?

  Hello

  I have a Satellite P875-321 with operating system factory upgraded to Windows 8.1, all the latest drivers installed.
  Whatever I do, it seems built in graphics card is used only (Intel HD 4000) and the Nvidia GT640M is never used.

  I check this:
  1. with the NVIDIA Control Panel (PhysX configuration shows that all screens are connected to the Intel HD 4000
  2. in resolution 8.1 windows settings / special settings lead me to the Intel HD 4000 properties, which indicates that this card is active

  What I tried:
  1 leaving everything default and use the external power supply (hoping that the computer automatically switch to NVIDIA when the external power
  2. use control panel NVIDIA and NVIDIA 3D as favorite graphics card settings

  How can I force my laptop to use a NVIDIA graphics card?

  Thank you
  Janos

  Hello

  The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

  But to get best performance all in game, it s advisable to use the external GPU (nVidia or AMD)
  This setting can be changed in the nVidia control panel s

  Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

  Now in the main window, you will find two global settings and program parameters tabs
  In the program settings tab, select the (game) program that needs to use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  Last but no less, in this program-specific settings, you can assign additional features to improve performance.

• Not possible to use the Nvidia GPU both graphics primary source all the time?

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  brian1208 wrote:

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  To force an application to use your NVIDIA graphics card, right click on its shortcut (or an .exe file), point on run with graphics processor and select the NVIDIA processor high performance.

• Lenovo Energy Management using the NVIDIA GPU

  How can I disable lenovo energy management to use the nvidia gpu? At the time, lenovo energy management has not used the nvidia gpu. Thank you.

  Already done with the problem. But my solution was however little stupid. I just used onekey recovery to return to the initial state and not to update my GeForce driver, now I use the stock 295.93 version.

• HP XW8600 workstation

  I try to install Windows 7 Professional 64 bit on HP XW8600 workstation with a new Seagate Baracudda 3 TB of hard disk.

  I'm trying to install Windows 7 Professional through key USB Bootable.

  It starts up fine but after copying windows files and updates online when it restarts. It comes with the error "installing Windows could not configure windows to run on this computer hardware."

  Please advise me to solve this problem

  Thanks much adavance

  Hello:

  You can also ask your question on the Forum to Support HP Business - xw workstations section.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.UryLq-l3u9I

  The main reason for this error is due to Windows do not have the SATA drivers needed to properly install the operating system on the hard drive.

  You can try this first before posting on the Forum of Business Support.

  Unzip the files I've attached at the bottom of this post (underneath where it says attachments).

  Then copy them to a usb without all the files flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• Very slow network with 10 Workstation and Windows 8 / 8.1 Windows

  Hello

  I come to you because I have a problem with the network with 10 Workstation and Windows 8 / 8.1

  In fact, if I copy files from or to a virtual machine with my host of Windows 8 by sharing Windows (SMB / CIFS), it is very very slow and unusable.

  Example: My host is a Windows 8 x 64 and Windows 8 x 64 host: transfer speed is about 100 or 200 KB/s and often 0 KB/s (transfer seems to be paused).

  With a guest Windows 8.1, same problem.

  After many tests, I also tried with Windows PE 5 (same kernel as Windows 8.1): same problem, unusable.

  But, miracle, if I use "Utility MSI - X OFF" Intel, I reboot and the problem disappears.

  There:https://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng & DwnldID = 18946

  Someone in this community, said that it have the same problem and a workaround solution was not to use Intel e1000e but e1000 then: I must admit, it works.

  With e1000, speed is around 30 to 60 MB/s and stable.

  But, by default, 10 Workstation e1000e value when I create a new VM Windows 8.1, so it's a problem... Do not manually change for each new virtual machine and explain this to my students.

  Please, you can reproduce this bug and fix it?

  Thank you very much.

  New workstation 10.0.2 fixed this bug. Perfect.

• Problem with VMWare Workstation combo, .vhd virtual drives and physical disks in the sector of size 4K?

  All,

  I suspect something wrong with some of my virtual machines.  I have been using these virtual machines for a while, and I see some weird behaviour recently.

  I see a lot of corruption in the virtual hard disk (.vhd based).  CHKDSK automatically gets performed many large files such as Oracle datafiles get damaged etc...  It all seems quite random and inconsistent, but I am using .vhd virtual machines in VMWare Workstation for years without problem.  This problem is new, and hard drives are basically unstable.

  I * think * (and I'm totally off base) that is perhaps the issue with my new external hard drives.  These discs have a 4 KB sector size, without e512.  Thanks to this architecture of hard drive, don't mount not the tools of Microsoft or manupulate .vhd files on these disks.  The questions seem to go away if I switch to vmdk or switch to the physical hard disk size-one-sector 512kb.  Because errors are not compliant, that I don't really have a way to document/prove that is the case, but it seems to be.

  I use version 9.0.0 on Windows 7 Workstation, and the guest is Windows Server 2008R2.

  My question is:

  (1) what meaning?

  (2) how I prove/document, since it is a contradiction?

  (3) is this a known problem?

  (Btw, switching HDD's vmdk is not an option in our case due to an obscure legal agreement with Microsoft.  I have to distribute my VMs in vhd format, even if they are designed to run on VMWare...)

  -> Adam

  These discs have a 4 KB sector size, without e512.

  (I've highlighted "without e512" in "BOLD" to key in my answer to the host operating system.)

  -L'OS is Windows 7 Enterprise

  According to the political support for the 4 K sector hard drives in Windows, Windows 7 does not support the native 4 K (logical 4 k sector size) but it does not support Advanced Format or 512th (size of logical sector physical and 512 bytes of 4 K) and that is can be the question.

• Workstation 9 - broken PXE boot - works with 8 workstations

  VMware Workstation 9 newly released, the PXE boot is broken. It works on the same machine with VMware Workstation 8.

  
  Virtual machine specifications:

  -Windows 7 and Windows 7 x 64

  -Bridged networking

  -2 1 processor cores

  I tried on different hardware, without Windows Firewall, but the PXE boot is broken when you use Workstation 9. Any thoughts as to why her behave this way?

  We are trying to perform a PXE boot and it gets everything stuck by sending requests for the services of pre-launch on the remote server, however, it seems that the return packets are not received. On 8 workstations, these are received and PXE boot works correctly.

  There is no AV installed in the host operating system.

  Wow, okay, just confirmed this seems to be a MAJOR bug in the work station 9, concerning ONLY to run 2 hearts or 2 CPUs. I tested with my cell phone would support all configurations (this is a quad core with hyperthreading). This applies in my case to Novell Zenworks Imaging, but can affect more.

  Results

  Config	PXE
  1 processor, 1 core	Success
  1 CPU, Core 2	In case of failure
  1 CPU Core 3	Success
  1 CPU, Core 4	Success
  1 CPU, Core 6	Success
  1 CPU, Core 8	Success
  2 CPU, 1 core	In case of failure
  2 CPU, Core 2	Success
  2 CPU, Core 3	Success
  2 CPU, Core 4	Success
  4 CPU, 1 core	Success
  4 CPU, Core 2	Success
  8 CPU, 1 core	Success

  Now here it gets crazy. My issue seems to be with the v11.2.0.0 of the Agent Novell PXE (Preboot Execution). It says "Sending queries to xxx.xxx.xxx.xxx" then he received never actually do anything to continue the boot process, but ANY other config except 2 CPU or 2 cores CPU works fine.

• Disadvantages with VMware Workstation (7) running on a server rack Xeon?

  Hello

  We intend to run VMware Workstation on my company (7) on a server rack Xeon based (the next generation of Xeon, i.e. Beckton/Nehalem-EX, with 8 cores, planned in the 1st quarter of 2010), and then access all of these virtual machine guests (based on Windows, both the server and desktop kind/flavor) by separate remote desktop connections direct to them.

  I had a very hard time, trying to find out if there is (large or small) disadvantages with this approach?

  We do not want to use Vmware Server for this, because its characteristics (for example with respect to snapshots) are lower than those of VMware Workstation, and nor do we want to use ESXi, because we always want to run Windows as a host on the server operating system.

  Is VMware Workstation our best choice then, and there will be no significant disadvantage? I think it's as if there is a missing in the VMware portfolio, product i.e. namely I miss a server product with all the features of VMware Workstation, which still runs on a different host OS, what am I?

  In any case, again, the main question is:

  This plan of ours is stupid, and in this case how should we best solve it? Is there really an advantage by using VMware Server instead of VMware Workstation in this situation and in this case more exactly what?

  Any input or answers will be greatly appreciated! Thanks in advance!

  VMware Workstation on a good Windows installation will do you fine.

  Ideal if you conclude that the MS-host in this day you don't need no matter what Antivirus or firewall.

  Then such a facility will do what you expect.

  I wouldn't consider VMserver - workstation surpasses VMserver my experience

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Can I use an SD card with the new MacBook?

  Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

  Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  On the SDXC - Apple Support and SD card slot

  I hope someone will find an adapter for you.

• Can I use your Apple TV with MacBook Air

  I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.

  Thank you very much.

  Can I use your Apple TV with MacBook Air

  Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.

  SD / HD makes no difference.

  You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.

  Would be there is always a problem to play these movies 'protected' outside the computer itself?

  No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.

  Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?

  Yes.

  Can I use a patch to connect the VGA cable to the port on the computer to the projector?

  Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.

• A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  Yes.

  http://www.Apple.com/Mac-mini/specs/

  the voltage may vary from 100-240 V AC.