Using all-in-one with answering machine

Similar Questions

• Officejet 5610 All - in One with my IMac using OS x 10.9.

  Cannot save the pages scanned on my Officejet 5610 all-in-One with my IMac using OS x 10.9.  Worked well with 10.8.

  Thanks for your reply.  When I found that the same problem had been sent by others, I discovered the same advice. Used the procedure you described and solved the problem.

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• OfficeJet 6835: Connection printer/fax to the single telephone line with answering machine and DSL router

  I change my current 2 lines phone/fax with answering machine setup and router DSL to a single line.  I have the right instructions HP and all the necessary parts and wiring diagrams, but I can't determine which of the now used phone cords is 'special' one provided in the box with your printer.  Instructions for the installation of a line saying I should use this cord between the DSL filter and the 1-line port on the printer for reliable fax.

  How can I identify this original HP cord?  And, in case I can't, what makes it "special"?

  Hi @Atlantico,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you change the way that your fax is installed on your HP Officejet Pro 6835 e-all-in-one printer and you want to be able to identify the phone cord supplied with the printer. I would like to help.

  Usually the phone cord supplied with the printer is black and a 2-wire telephone cord. There are basically 2 types of telephone cords, 2-wire or 4-wire. cords 2 telephone wires are the most basic phone cords and because the fax was built around the analog telephone systems, this is the type of cord they suggest to use.

  You can identify a phone cord of 2 sons looking at the end of the connector that you plug into the phone jack. Please see the attached diagram below.

  

  Please let me know if that solves the problem, or if you need assistance.

• Can send but cannot receive faxes on HP Laserjet on Mac 10.9 Mavericks with answering machine TAM

  I have an iMac running OS 10.9 (Mavericks) and a machine to print/scan/fax all-in-one HP Laserjet Professional M1212nf MFP connected by USB.  I have a phone with answering machine connected system.

  I can send faxes of the HP and the Mac (using the pdf fax).  What I can't do, is to receive faxes on the HP (I know that the Mac cannot receive faxes with this machine).  I tried all the combinations of parameters without result even unplug the phone/answering machine without result.

  Any ideas what I need the settings?

  Hi ChuckStewart,

  It is definitely a head scratcher! I found some additional information from the following link, you use a product of Fax HP with a telephone answering machine (TAM).

  I found this interesting presentation text, when recording the outgoing message on your TAM, share of voice must be at least 10 seconds of time, but not more than 20 seconds . Save 5-7 seconds of silence at the end of the vocal part of your outgoing message (message coming out would be your voice message length plus the extra 5 to 7 seconds of recorded silence ).

   

  I wonder if you might find something useful in the document.
  

  Please let me know. Thank you.

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• Photosmart C7280 all-in-One with HP Premium Plus Photo A4 Semi Gloss paper

  For the past two years, I have been using the Photosmart C7280 all-in-one, with Premium Plus Satin A4 Matte Photo paper and have gotten excellent printing results.

  Now that this article is no longer available I just bought some suggested alternative, which is Premium Plus Semi Gloss; but I am surprised and very disappointed by lower printing results.

  Compared to the Matt satin results, they are very much less clear and the colors appear pale and lower.

  Has anyone had similar experiences and, if so, found a solution?

  Hello graham_jester

  It is up to you. In general, the solution is marked when a particular post has solved your problem or an appropriate workaround solution. In any event, I appreciate the gesture.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• 700 - 500Z envy: you can use a HP Officejet J4580 all-in-One with a 700-500Z envy

  I just bought an Envy700-500Z. Very happy. But I was printing on a laptop Toshiba with a HP Officejet J4580 all-in-one printer. My question is can I use officejet j4580 on Envy with hpeprint?

  @Psst-007

  Welcome to the Community Forum of HP.

  The OfficeJet 4580 isn't an ePrint printer; You can use the HP ePrint Mobile App to print from your mobile to this printer when you are connected to the same local network:

  HP printers connected to the Web and cloud Services supported for HP printers

  -----------------------------------------------------------------------------

  To access the full range of functions ePrint, you need an ePrint printer.

  Reference:

  Add the printer device

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' Kudos on this post.

  Click on accept as Solution when my answer provides a fix or a workaround!

• don't use paper photo 7510 e - all - in - one with ePrint

  When I print from my Smartphone to my 7510 e - all-in - One - C31using ePrint, photographs always print on photo paper.   How to print on paper with ordinary letter, by default?

  The 7510 will always send ePrint default photos to the photo tray. It is a normal feature. However, you can set the ePrint Mobile application to send pictures to the tray paper. Open the application, select 'photos', select the photo you want to print. Click on print, then select the settings in the upper right of the window. Here you can select the paper size and adjust accordingly.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Photosmart C7280: question of installation on fax to PC with answering machine on the same phone line

  I have an answering machine on the phone line that would be used for incoming faxes. The guidance address how fax to PC using the phone line at all. How do you put up? Do you need a distinctive number of the ring, or you can use the same phone number as the fixed line? The answering machine will pick up faxes?

  Hi @MSS1,

  Thank you for reaching out to the forums! I understand that you are having problems of fax. I'd love to help you.

  It's not like you can fax it to the PC with the software for this model. You would have to send and receive faxes from the printer.

  This document provides steps for not being able to fax and it also provides information for the connection to the fax: can't send or receive faxes. Do not take into account the title.

  I have provided the user manual of the printer to set up the fax, beginning on page 62: Photosmart C7280.

  Here is a document to receive faxes: receipt of the Fax.

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Install with answering machine

  I am considering buying a HP 1212nf MFP printer, but I need to know if I can connect to a phone line and can continue to use my machine. I remember that a previous HP printer had this ability. Is my VOIP phone line. I looked through all what I canfind on the printer, but now answer my question.

  Yes, you should be able to. Do not forget to connect the answering machine to EXT2 on the back of the printer and telephone cord int INT1.

  IF you have a double ring or triple for your incoming faxes you must configure the printer to answer the specific rings (all, double, triple, or double and triple)

  WARNING: VOIP (voice over IP) aka (digital phone lines) may cause problems while sending and receiving fax. You can reduce the speed to slow and stop ECM (error correction mode) to help with he problem.  Fax is an old technology. It was created in 1843 and later completely introduced in 1881 and has been modernized, as speed increases as recently as 1998. When we introduce old technology (fax) with new technologies (VOIP) it does not work always.  Only printers I know that work on VOIP can cause a service called Efax. Currently you can find the list of printers than efax support at this link

• Firefox profiles are not very useful - all instances open with even a

  I'm using Linux: LMDE cinnamon Edition - 64-bit
  I use the version of firefox Mozilla Firefox 31.0

  I wish to have two instances of FF running. One with my standard, personal settings and a second instance that ONLY connects to Facebook and stop data leakage between the two. I can do this by opening up Facebook in another browser (for example, Chrome, or Opera).
  I checked the ProfileManager under Firefox and created a second profile called "FB".
  I can run firefox Pei FB and she opens an instance of FF with none of my personal settings available - that's what I was hoping.
  However, if I run a second instance of FF - for example the command-line firefox-p default it loads with the same profile as the first instance I opened, not the new profile such as specified in the command.

  I can't that choose the profile if there is no instance of previous firefox running under my user name. The first instance defines which profile is used for all subsequent executions - no matter what profile I specify on the command line. Even running firefox - ProfileManager start with Prime-specifie profile, Profile Manager.

  Hello

  If you want to run multiple instances of Firefox, you will need to add a - no - remote parameter to the command.

  For example:

  • Firefox - P-no-remote

  Please see:

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.