OfficeJet 6835: Connection printer/fax to the single telephone line with answering machine and DSL router

Similar Questions

• HP Officejet Pro 8000 printer range makes the vertical white lines

  My HP Officejet Pro 8000 printer makes white vertical lines around text and photos.  What can I do?  I use Windows 7.  As far as I can see, the print heads don't need to be changed. Cleaning them would help? If so, how can I clean them? Thank you.

  Hello

  You can try the steps listed in this document:

  Troubleshooting print quality problems

  Let me know if it helps

• Can send but cannot receive faxes on HP Laserjet on Mac 10.9 Mavericks with answering machine TAM

  I have an iMac running OS 10.9 (Mavericks) and a machine to print/scan/fax all-in-one HP Laserjet Professional M1212nf MFP connected by USB.  I have a phone with answering machine connected system.

  I can send faxes of the HP and the Mac (using the pdf fax).  What I can't do, is to receive faxes on the HP (I know that the Mac cannot receive faxes with this machine).  I tried all the combinations of parameters without result even unplug the phone/answering machine without result.

  Any ideas what I need the settings?

  Hi ChuckStewart,

  It is definitely a head scratcher! I found some additional information from the following link, you use a product of Fax HP with a telephone answering machine (TAM).

  I found this interesting presentation text, when recording the outgoing message on your TAM, share of voice must be at least 10 seconds of time, but not more than 20 seconds . Save 5-7 seconds of silence at the end of the vocal part of your outgoing message (message coming out would be your voice message length plus the extra 5 to 7 seconds of recorded silence ).

   

  I wonder if you might find something useful in the document.
  

  Please let me know. Thank you.

• Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

  Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

  Hello

   
  1. have you checked the problem by plugging the headset to another computer?
  2. it worked before?
  3. What are you talking about ""device"is not connected?
   
   
   
  I suggest you to connect to another computer and check.
  Also check if the device is compatible with Windows 7.
  Reference:
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
  If it's compatible, perform the methods below
  If it is not compatible, see the following articles:
   
   
   
   
  What is program compatibility?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
   
   
  Method 1: Run the audio Troubleshooter and see if it helps.
  Open the audio playback troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
   
   
   
  Method 2:
  Run the Fixit described in the article and perform the steps:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  See also:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
   
   
   
  I hope this helps.

• When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?

  Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.

  See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

• I would like to install a copy of the CS6 on mac with os x and pc with WIN7. Is this possible?

  I would like to install a copy of the CS6 on mac with os x and pc with WIN7. Is this possible?

  In order to use it on Mac, you will need to purchase another license for Mac.

  Purchase CS 6 Creative Cloud now includes Creative Suite Master Collection and Design Premium features

  Or, you can go for creative cloud that you can use on both machines Alternately, one at a time. Pricing and membership creative cloud plans | Adobe Creative Cloud

• PE 9.0 no sound with video to DV AVI type 2, but the sound is ok with Media Player and Power DVD

  PE 9.0 no sound with video to DV AVI type 2, but the sound is ok with Media Player and Power DVD

  Werner,

  Good news!

  When I install a new video driver, I also go to Realtek, download and install their last too.

  Good luck and happy editing.

  Hunt

  PS - Looks like you can mark this thread as a response. If you need help, please see this article: http://forums.adobe.com/thread/1058744?tstart=0

• HP Officejet 8610: Unable to fax from the computer

  I have a HP Multifunction printer and use the fax from the computer option several times a month. I discovered this week that she did not work AGAIN. I have had this printer about a year and need to reinstall the software several times. When I select the fax printer and say 'print', the fax screen should display and ask where to send them, but nothing happens. When I check the devices screen and printers, it shows the fax as unrelated to printing or pending tasks. The machine is connected because I can print to this well, that's just something wrong with the communication by fax. I found that uninstalling and then reinstalling the printer solves the problem, but the number of times that I needed to do this is frustrating. I guess that something is messed up when windows does its updates. Is there a setting of simple connection that I could update instead of reinstalling everything on all of the computers on my network? Maybe HP could be added a correction for this option to their troubleshooting.

  Hello

  You can use the universal Fax HP driver instead:

  1. Download and extract the following:
     http://FTP.HP.com/pub/softlib/software13/COL60874/DS-146586-1/HPUFDDriver.zip
     (Use a program like Winzip or right-click on the file and select extract all).
  2. Open the extracted folder and run setup.exe
  3. Follow the instructions on the screen, a printer HP Universal Fax Driver will be created on your PC.
  4. HP Universal print driver Fax, select your printer and check the box to add a queue for your printer.

  Kind regards

  Shlomi

• HP OfficeJet Pro 8600 no FAX OF the COMPUTER

  Hi, when trying to fax from the computer, apparently nothing is happening...

  Steps-

  Intended to document on screen

  Select Print

  Choose printer 8600 FAX

  Dialog (seems even PRINT)

  After hitting OK, nothing happens.

  I assumed that the box should appear asking where I want to send either right when I select print via 8600 Fax, or right afterwards?

  Works ok / can fax directly from glass all-in-one.

  A ran utilities print and Scan doctor and says that everything is ok. But does not list the FAX as a separate printer.

  When I check the fax under devices and printer, no documents are in the print queue.

  Suppose he need some sort of update driver or reintall?

  Running Windows 7, 64 bit.

  Thank you!

  Hello

  See the link below.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

• OfficeJet Pro 8620 include fax on the confirmation report image

  The manual says I can include a picture of my fax on the confirmation on the 84 page report:

  http://h10032.www1.HP.com/CTG/manual/c04204791.PDF

  To include an image of the fax on the report
  1. in the Control Panel printer displays, touch and drag your finger across the screen, then
  Select Configuration.
  2. press on the configuration of the fax machine.
  3. touch Advanced fax setup and touch Fax of Confirmation.
  4. tap on (fax) or we (send and receive).
  5. press on the Fax Confirmation with the image.

  However when I go into Setup, I don't see any reference to the "Confirmation of fax with the image.

  My only chosen are:

  Off does not print a fax confirmation report when you send and receive faxes successfully.
  On (fax) prints a report fax confirmation for each fax you send.
  Upon receipt of the fax) prints a report for each fax fax confirmation you receive.
  Print a report of fax confirmation for each fax that you send and receive on (Send and Receive).

  My firmware version is FDP1CN1414AR

  Product number: A7F65A

  Hey @darrensweeney ,

  Thanks for joining us on the HP Forums today, hope you enjoy your time with us!

  I understand that you are having problems with the instructions in the manual that explains how 'Touch Fax Confirmation with the image. You have followed the instructions and can not get the same result.

  After completing step 4 and select 'Send of Fax' or 'send and receive', you will come to a new screen that asked 'Touch Fax Confirmation with image' or 'Touch Fax Confirmation'.

  These steps are correct because I have the same version of the firmware and the same printer here at my desk and I followed these steps to get the "Confirmation of fax Touch with image.

  Please try again and let me know what happens. Thanks for posting.

• Photosmart c4280 print gibberish of the new Macbook Air with OS X10.9

  I can't get this to print.  It will show the page after page, a single line of gibberish for a simple print request.  The machine is a new macbook air with 10.9.4 IMac w/10.6 wife print wireless with no problems.  As does my son 7 windows-powered PC.  So I don't know where to turn.  I already did a reload of the pilot with the same results.  Any help would be greatly appreciated.

  No problem.

  Since it can print on other computers, have you tried another connection on this 10.9.4 computer? I just want to see if that makes a difference. You can try to use a USB cable to check if you are receiving the same question. If you do not, then you know that something is interfering with the wireless connection. If you do not have the same issue, then you will need to contact Apple support for assistance. Click here to read: Apple Worldwide Contact.

  Good luck.

• Photosmart C7280: question of installation on fax to PC with answering machine on the same phone line

  I have an answering machine on the phone line that would be used for incoming faxes. The guidance address how fax to PC using the phone line at all. How do you put up? Do you need a distinctive number of the ring, or you can use the same phone number as the fixed line? The answering machine will pick up faxes?

  Hi @MSS1,

  Thank you for reaching out to the forums! I understand that you are having problems of fax. I'd love to help you.

  It's not like you can fax it to the PC with the software for this model. You would have to send and receive faxes from the printer.

  This document provides steps for not being able to fax and it also provides information for the connection to the fax: can't send or receive faxes. Do not take into account the title.

  I have provided the user manual of the printer to set up the fax, beginning on page 62: Photosmart C7280.

  Here is a document to receive faxes: receipt of the Fax.

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

  Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.

  Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:

  • Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  • Under "Time range to clear", select "all".
  • Now, click the arrow next to details to toggle the active details list.
  • In the list of details, see the Cache and Cookies and uncheck everything.
  • Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

• OfficeJet Pro 8600 Premium: centered on the black vertical line on copy the view when using the auto doc feeder

  This just started happening in the last two weeks. Whenever I have to SCAN using the ADF, a black line runs from top to bottom. I cleaned the glass to the left of the flat glass and cleaned the white strip above the glass on top of the printer that opens. The community has it any other suggestions or experience with this issue? The printer is about 2 years old.  Thank you!

  I looked back through the forum and found a great Bob Headrick troubleshoot in 2008. This allows to calibrate the printer has been the answer for me. Thanks Bob!

• Cannot establish network connection. Messages on the icon alternate between "Acquiring network address" and "unplugged network cable.

  Original title: cannot establish a network connection

  Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?

  Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:

  Diagnosis of IP Configuration
  Invalid IP address
  Info	Zero (0.0.0.0) detected IP address
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: reset the network connection
  action	Disabling the network card
  action	Activation of the card network
  Info	Successfully activated network adapter
  Info	Zero (0.0.0.0) detected IP address
  action	Repair Manual: Reboot modem
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  Info	Redirect the user to support call

  WinSock status
  Info	All base service provider entries are present in the Winsock Catalog.
  Info	Winsock Service providers strings are valid.
  Info	Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
  Info	Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info	Entry provider RSVP UDP Service Provider managed the loopback communication test.
  Info	Entry provider RSVP TCP Service Provider passed the loopback communication test.
  Info	Connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter
  Network location detection
  Info		Using the Internet connection at home
  Identification of network adapter
  Info	Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
  Info

  Ethernet connection selected

  State of the network adapter

  Info

  The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn

  FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  warn

  FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  error

  Could not make an HTTP connection.

  error

  Could not make an HTTPS connection.

  error

  Could not make an FTP connection.

  I found the problem (s), even if I am always left with a few questions.

  During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.

  The solution:

  (1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.

  (2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.