Install with answering machine

Similar Questions

• OfficeJet 6835: Connection printer/fax to the single telephone line with answering machine and DSL router

  I change my current 2 lines phone/fax with answering machine setup and router DSL to a single line.  I have the right instructions HP and all the necessary parts and wiring diagrams, but I can't determine which of the now used phone cords is 'special' one provided in the box with your printer.  Instructions for the installation of a line saying I should use this cord between the DSL filter and the 1-line port on the printer for reliable fax.

  How can I identify this original HP cord?  And, in case I can't, what makes it "special"?

  Hi @Atlantico,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you change the way that your fax is installed on your HP Officejet Pro 6835 e-all-in-one printer and you want to be able to identify the phone cord supplied with the printer. I would like to help.

  Usually the phone cord supplied with the printer is black and a 2-wire telephone cord. There are basically 2 types of telephone cords, 2-wire or 4-wire. cords 2 telephone wires are the most basic phone cords and because the fax was built around the analog telephone systems, this is the type of cord they suggest to use.

  You can identify a phone cord of 2 sons looking at the end of the connector that you plug into the phone jack. Please see the attached diagram below.

  

  Please let me know if that solves the problem, or if you need assistance.

• Can send but cannot receive faxes on HP Laserjet on Mac 10.9 Mavericks with answering machine TAM

  I have an iMac running OS 10.9 (Mavericks) and a machine to print/scan/fax all-in-one HP Laserjet Professional M1212nf MFP connected by USB.  I have a phone with answering machine connected system.

  I can send faxes of the HP and the Mac (using the pdf fax).  What I can't do, is to receive faxes on the HP (I know that the Mac cannot receive faxes with this machine).  I tried all the combinations of parameters without result even unplug the phone/answering machine without result.

  Any ideas what I need the settings?

  Hi ChuckStewart,

  It is definitely a head scratcher! I found some additional information from the following link, you use a product of Fax HP with a telephone answering machine (TAM).

  I found this interesting presentation text, when recording the outgoing message on your TAM, share of voice must be at least 10 seconds of time, but not more than 20 seconds . Save 5-7 seconds of silence at the end of the vocal part of your outgoing message (message coming out would be your voice message length plus the extra 5 to 7 seconds of recorded silence ).

   

  I wonder if you might find something useful in the document.
  

  Please let me know. Thank you.

• Photosmart C7280: question of installation on fax to PC with answering machine on the same phone line

  I have an answering machine on the phone line that would be used for incoming faxes. The guidance address how fax to PC using the phone line at all. How do you put up? Do you need a distinctive number of the ring, or you can use the same phone number as the fixed line? The answering machine will pick up faxes?

  Hi @MSS1,

  Thank you for reaching out to the forums! I understand that you are having problems of fax. I'd love to help you.

  It's not like you can fax it to the PC with the software for this model. You would have to send and receive faxes from the printer.

  This document provides steps for not being able to fax and it also provides information for the connection to the fax: can't send or receive faxes. Do not take into account the title.

  I have provided the user manual of the printer to set up the fax, beginning on page 62: Photosmart C7280.

  Here is a document to receive faxes: receipt of the Fax.

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Using all-in-one with answering machine

  I have an office jet pro 8600 and love it.  However, I would like to know if it is possible to use the fax without having to connect to my machine.  I would use the printer and the answering machine in two different areas.  Is this possible?

  Hello

  The answer to your question is YES.
  Listed below are two ways...

  #1: having a dedicated fax line.
  #2: subscribe to a distinctive ring by calling your carrier telephone and even on the printer menu Telec.

• BlackBerry Z10 drag upward with answering machine

  Y at - it a simple and fast way for handup/disconnect from an incoming call without answering and then hit the button to hang up.

  You don't want to take a call, do not have the phone on silent. You want to disconnect and let go to the virtual machine.

  Hello kevingets,

  Thank you for your question on how to send a call to voicemail for your smartphone BlackBerry Z10.

  You can do this by pressing the name of the appellant on an incoming call (a thin red icon should appear on the top) and slide it toward the top. The call will go to voicemail if activated service.

  Let us know if that helps.

• problems with SPA112 and answering machine

  Recently installed a SPA112 unit, which until this works fine without any problems, but have a few minor issues. Among others, I can't the 2 sec machine records messages; When there is an incoming call the answering machine picks up the call of the appellant Gets a busy; which means that the appellant is not able to hear the outgoing message, nor able to save?

  Worth mentioning that I have before that used a vDSL Thomson 78 modem x who offered two pots the same equitment I use was connected to and also the autoresponder has worked with. Then nothng has changed with the Setup program expect that the SPA112 has replaced the modem ADSL Thomson when it comes to managing the voip part.

  One suggestion I've seen is to change the 'delay to reorganize' at 15, which until now did not make a difference. In addition, the waveform of the ring has the sine value and the default value of the voltage.

  Open to suggestion to point me in the right direction what to look for in the config for the SPA112.

  Format text in time with no seconds and encoding UCS-16 can be ignored. But the messages are truncated at the first ',' and the rest is missing. Second file is the SQLite database...

  You are to test my ability do identify and treat the data hidden, isn't she?

  Well, I decided to extract the lines of SQLite database as TXT form is incomplete. I don't know any format if column Tm, fortunately, we have no absolute time and I wish I have guessed correct relative time in seconds.

  So result (inline comments):

  Incoming calls:

  002.13 > CC_eventProc(), the event: CC_EV_SIG_CALL_ARRIVED (0 x 31), cover: 0, rating: 0, par2: 0 x 40956900
  002.16 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_RINGING
  002.16: CID:CID_initGen() [0] > won 0 delay 1200 phone abcdefg786 name 46bcdefg786
  002.23: CID:OnHookTx PolRev

  Transmission of Caller ID:

  002.33 > uchSendDTMF(), sending 12 DTMF to line 0
  002.33: [0] beginning of the DTMF/FSK CID, CID_ST_ACTIVE
  002.48 > uchSendDTMF(), sending of DTMF a on line 0
  002.64 > uchSendDTMF(), sending of DTMF b on line 0
  002.80 > uchSendDTMF(), sending of DTMF c line 0
  002.96 > uchSendDTMF(), sending of DTMF d to line 0
  003.13 > uchSendDTMF(), sending e DTMF on line 0
  003.29 > uchSendDTMF(), sending of DTMF f at line 0
  003.45 > uchSendDTMF(), sending of DTMF g on line 0
  003.61 > uchSendDTMF(), sending 7 DTMF to line 0
  003.77 > uchSendDTMF(), sending of DTMF 8 to line 0
  003.93 > uchSendDTMF(), sending 6 DTMF to line 0
  004.08 > uchSendDTMF(), sending of DTMF 14 on line 0
  004.25: [0] CID CID: FACT

  Six rings:

  004.52: CID:Ring now
  004.54 > SLIC_startRing State 0 ts 0x1aa4ccon 1000 off 5000 len 60000
  004.54 > pol [0] of the event on the cad of ring 0 0
  009.33 > pol [0] of the event on the cad of ring 0 0
  014.12 > pol [0] of the event on the cad of ring 0 0
  018.92 > pol [0] of the event on the cad of ring 0 0
  023.73 > pol [0] of the event on the cad of ring 0 0
  028.52 > pol [0] of the event on the cad of ring 0 0

  Hook:

  029,50 > off hook [0]
  029.51 > NEW_CALL_STATE(), dial 0: former State = CC_CST_RINGING, new State CC_CST_ANSWERING

  Fully connected call:

  029.57 > NEW_CALL_STATE(), dial 0: former State = CC_CST_ANSWERING, new State CC_CST_CONNECTED

  Disconnected from the remote side:

  039.62 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
  039.62 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALID

  The CPC sent to the device called:

  047.64 > CPC SLIC_SET_OPEN_STATE on line 0
  048.05 > CPC go to line 0 in CC_CST_IDLE
  048.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLE

  Called device still picked up, assuming that the new (outgoing) call:

  048.07 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
  048.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING

  Called device hung up the phone, call the cleaning:
  048.72 > hook on [0]
  048.73 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE

  Camera won, outgoing call starts, digit collection:

  060.05 > [0] off Hook
  060.06 > cepIdleProc (lid = 0, call = 0x17a974, event = 9 (CC_EV_USR_SEIZURE), by = 0, par2 = (Nile))
  060.07 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  065.20 > SIP_sessDlgEventProc: event: 41 (SIP_EV_DLG_TERM), ucState: 4

  Device on the hook even once, no figures were received in this cycle:

  066.01 > hook on [0]
  066.01 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE

  Camera won, outgoing call starts, digit collection:

  079.17 > [0] off Hook
  079.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  081.68 > line: 0 figure DTMFON event has received a
  081.81 > line: 0 DTMFON received the event figure b
  081.94 > line: 0 DTMFON received the event number c
  082.07 > line: 0 DTMFON received the event sales
  082.20 > line: 0 DTMFON received the event e figure
  082.36 > line: 0 DTMFON received the event number f
  082.49 > line: 0 DTMFON received the event figure g
  082.62 > line: 0 sales event received DTMFON 7
  082.76 > line: 0 sales event received DTMFON 8
  082.89 > line: 0 sales event received DTMFON 6
  090.96 > cepDialingProc(), the event = 33 (CC_EV_TMR_DIALPLAN)

  Figures gathered (numbering commited by dial plan timeout):

  090.96 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_CALLING
  090.97: call:[email protected] / * /: 0, rc = 0
  091.47 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CALLING, new State CC_CST_PROCEEDING

  REGISTRY procedure was shot and completed during call setup:

  097.66 > RegOK [0]. NextReg in 296 (1)

  Fully connected call:

  099.05 > NEW_CALL_STATE(), dial 0: former State = CC_CST_PROCEEDING, new State CC_CST_CONNECTED

  Disconnected from the remote side:

  103.75 > SIP_sessDlgEventProc: event: 45 (SIP_EV_DLG_BYED), ucState: 3
  103.76 > NEW_CALL_STATE(), dial 0: former State = CC_CST_CONNECTED, new State CC_CST_INVALID

  The CPC sent to the peripheral component:

  103.76 > statr CPC CC_EV_TMR_INVALID timer
  111,76 > CPC SLIC_SET_OPEN_STATE on line 0
  112.19 > CPC go to line 0 in CC_CST_IDLE
  112.19 > NEW_CALL_STATE(), dial 0: former State = CC_CST_INVALID, new State CC_CST_IDLE

  The device still picked up, assuming that the new (outgoing) call:

  112,22 > NEW_CALL_STATE(), dial 0: former State = CC_CST_IDLE, new State CC_CST_DIALING
  Flash hook events occurred. Dial 0 (data collectors) cancelled. New call (1)
  created, collection figures:

  112,37 > flash hook [0]
  112,37 > CC_eventProc(), the event: CC_EV_USR_HOOKFLASH (0x3), cover: 0, rating: 0, par2: (none)
  112,37 > NEW_CALL_STATE(), dial 0: former State = CC_CST_DIALING, new State CC_CST_IDLE
  112.43 > NEW_CALL_STATE(), call 1: former State = CC_CST_IDLE, new State CC_CST_DIALING

  No number with shot composition timeout:

  136.34 > NEW_CALL_STATE(), call 1: former State = CC_CST_DIALING, new State CC_CST_INVALID

  Line is still the hook at the end of the journal.

  Well. So we have commented on the newspaper. Now - what is your question?

  Note that the CPC Signal (control Signal party call) is a momentary drop in voltage (0 volts DC) on the line for a period of time. It is the way in which the side 'server' of analog line (SPA112 here) informs device calling (your machine here) that the call has been disconnected by side called. Cisco is also using the CPCS to report the same he remote disconnect the case of incoming calls despite CPC does not has been provided for this direction of call.

  Not all phones can recognize the signal of the CPC, especially when called. SPA112 must be configured according to the particular phone's capabilities.

• HP Officejet Pro 6830: Receive faxes with a HP officejet pro 6830 w / answering machine

  I had an OLD officejet model that could receive faxes even if the answering machine was not connected directly to the fax machine the 6830 manual says that it must be directly connected.  My current Brother printer does NOT receive faxes because of this problem.  Anyone know if I directly connect my machine to this model (Officejet 6830) to make it work?  I won't buy it if it will not work.

  Hello @JPJ408,

  Welcome to the Forums of HP Support!

  I understand that you are looking to buy a printer all-in-one HP Officejet Pro 6830 for fax purposes. While the User Guide advise you to plug the answering machine directly on the back of the Officejet unit, it is not necessary.

  If you have a fax with an answering machine on her line, the only requirement is that the fax is set to two rings higher than the answering machine. Most of the responders are put back on 4 rings. As a result, you would set your Officejet to automatically pick up on 6 rings. In this way, when a voice is heard, you can manually respond to the call before the answering machine to pick up. If you are not home and then people can still leave messages on your answering machine. If you have a fax to come through, do not respond. The answering machine will pick up after 4 rings. At this point the fax machine "listen" on answering machine message and if fax tones are detected, the fax will take over and receive the fax.

  I hope this helps clear up any confusion.

• I created a whole creative cloud with serial number built includes all elements of software, that we deserve. I was able to install on a machine. When I try to install anywhere else on another mac, Adobe Creative Cloud install fails

  I created a whole creative cloud with serial number built includes all elements of software, that we deserve. I was able to install on a machine. When I try to install anywhere else on another mac, I get operation has expired.

  We run OSX Yosemite. The only mac that it worked was the one in which I initially downloaded the package. We cannot reuse the same package file? I have a site license and requires the same software installed on several machines.

  Hello

  Welcome to the Adobe forums.

  You can certainly install the package on other MAC computers. Can you please check the security and privacy on MAC machine where the batch fails.

  Go to System Preferences > Security & Privacy > General > allow downloaded applications on and select anywhere.

  Launch the installation of the package. Let us know the error if it does not work yet.

  Thank you

  Ashish

• I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

  I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

  Creative cloud learn & support

  http://helpx.Adobe.com/creative-cloud.html

  Cloud creation help / install, update or uninstall applications

  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• Can you install Hyperion EPM machine 64-bit with windows8?

  Hi gurus,
  
  Can you install Hyperion EPM machine 64-bit with windows8?

  There are 64 versions of windows available in delivery--"Oracle Enterprise Performance Management System (11.1.2.2.0) Media Pack for Microsoft Windows x 64 (64-bit)"

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yes, you can install it on two computers, and they can be a mac and a windows computer.

• can I install a virtual machine of 3 GB memory with physical memory to Go

  Hello!

  really happy you joined today, but I have a problem: I have a 3 GB memory machine and I would like to install a virtual machine with 3 gigabytes of memory, but I have a question whish is worrying me now: according to my physical memory size is it possible?

  Welcome to the forums!

  In general, this is possible, but you may face a very slow system then. You must configure VMware Workstation through its 'preferences' to allow the memory swapping for the guests. The RAM is not physically available is provided by the host operating system swap file.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• Uniden answering machine to answer with the SPA3102 to do XS1455

  How can I get my Uniden answering machine to answer calls from new?

  I found and tested the fix.

  I found a reference to change the rate of 1 ringtone to 60(.4/.2,.4/2) in Distinctive Ring, regional tab.
  See also http://www.jmgtechnology.com.au/spa_3000_guide.pdf

• Try to understand what Adobe first Version works better with my machine

  Hello everyone, I posted this question two days ago and received Help. However, I need a little more. I am in the process of transition in Adobe video editing software. I have used Final Cut Pro for the past (12) years and I'm finally deserting a ship. I was wondering that if I could get some guidance as to what Version of Adobe editing work better with my Machine. I have a Power Mac Pro (mid 2010). Below you will find my profile. By comparing what my machine is composed of and do not bounce these specifications out of my mine are like trying to read the hieroglyphics, at least for me. Thank you all for your help and I'm really excited to start using this software and interact online with what I know is some very technically savvy technicians and artists. Thank you! Also referred me to the Web site who has specifications of compatibility, but I want to make sure that I am editing with the software more compatible with my device. Thank you all very much. & I thank you all for your answers to a few days, it was very helpful, I just need help a little more if you have time to guide me in the right direction. Thank you!

  Operating system

  Mac OS X El Capitan

  Treatment

  8-core (standard configuration) two-processor 2.4 GHz Quad - Core Intel Xeon E5620 "Westmere".

  12 MB cache L3 entirely shared by processor

  Turbo Boost dynamic performance up to 2.66 GHz Hyper-Threading technology for up to 16 virtual cores

  Quad-core

  (standard configuration) A processor at 2.8 GHz Quad - Core Intel Xeon W3530 "Nehalem".

  8 MB cache L3 entirely shared by processor

  Turbo Boost dynamic performance up to 3.06 GHz

  Hyper-Threading technology for up to 8 Virtual cores

  Advanced Intel microarchitecture

  Integrated memory controller

  SSE4 SIMD 128-bit engine

  64-bit data paths and registers

  Optimized for energy efficiency

  Audio connections

  Four ports FireWire 800 (two on the front, two on back panel)

  Five USB 2.0 ports (two on the front, three on the back panel)

  Two USB 2.0 ports on keyboard included

  Taken minijack headphone of façade and internal speaker

  Audio digital optical and output TOSLINK ports

  Mini-prises of output and analog stereo line level input

  Multichannel audio via Mini DisplayPort

  Graphics and displays

  Double width, 16 channel PCI Express 2.0 graphics slot with one of the following installed graphics cards:

  ATI Radeon HD 5770 with 1 GB memory GDDR5, PCI Express 2.0, two ports Mini DisplayPort and DVI port to double bond

  ATI Radeon HD 5870 with 1 GB memory GDDR5, PCI Express 2.0, two ports Mini DisplayPort and DVI port to double bond

  Possibility of installing two cards ATI Radeon HD 5770

  Support for up to six screens

  Support for digital resolutions up to 2560 x 1600 pixels

  Support of analog resolution up to 2048 x 1536 pixels

  Video cards available for:

  Additional DVI output Mini DisplayPort to DVI (optional)

  Additional dual-link DVI, output Mini DisplayPort to DVI dual link (optional)

  Output VGA Mini DisplayPort to VGA or DVI to VGA Display Adapter (optional)

  Memory

  Dual processor systems

  2.4 GHz system: 1066 MHz DDR3 ECC SDRAM

  2.66 GHz and 2.93 GHz systems: 1333 MHz DDR3 ECC SDRAM

  Eight memory slots (four per processor) supporting up to 64 GB of memory main using 1 GB, 2 GB, 4 GB or 8 GB DIMMs

  Single processor systems

  2.8 GHz and 3.2 GHz systems: 1066 MHz DDR3 ECC SDRAM

  3.33 GHz system: 1333 MHz DDR3 ECC SDRAM

  Four memory slots supporting up to 32 GB of memory main using 1 GB, 2 GB, 4 GB or 8 GB DIMMs

  Hello

  You can post on the Pr material forum for views on your listing and if there is no mercury potential engine of reading problems, but I would say that you really want to know how Pr will respond by installing on your machine (maybe setting a restore / restore, first if Mac offers that). You are the best solution would be to download a free trial version of Pr CC 2015 to give it a test run. Don't know what your needs / budget are, but since Adobe works by monthly subscription, you can also download the full Suite of Cloud Creative at trial. Then you will get After Effects and hearing that link dynamically with Pr play with as well (and Photoshop, Illustrator, etc.)