Using as a standalaone MX200 and MX700
Hi guys,.
I 2qty MX200 and 1qty MX700 both as autonomous, without CUCM or MCU. But these devices have multi-site features.
I intend to use it for three locations RPF video confrencing.
Is this possible? If so, how can I go about it?
Kind regards
Peter.
Hello Peter,.
There is a lot of discussion in this forum for independent endpoints, you could do a search and see what others did or recommend.
MX have the same configuration as the SX, EX, C - series endpoints.
BR Oleksandr
Tags: Cisco Support
Similar Questions
-
Hello team,
MX200 and MX300 Codec used is C series or a new codec is here.
MX200 and 300 gen 1 use C20.and gen2 uses SX20.
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
MX200 and MX300 with camera 1080p12x
Hello
I would like to know what kind of camera will support MX200 and MX300 outside the norm.
The standard set come with Cisco Telepresence precision HD camera: 1080 p HDx4.
SKU: CTS-MX300-55-K9
SKU: CTS-MX300-42-K9
Lets say I wanted to use 1080 p 12 x camera with MX200 or MX300, instead if 1080 p HDx4, is possible. If so, can you give us the SKU number
Thank you
Best regards
Titebiket Mohamed Yatim
Hi titebiket
It is not possible. The camera is not removable. Only integrated PHD1080p4xCam
BR Oleksandr
-
Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?
N ° you need a computer logic board which has built in Thunderbolt.
-
Can I use a Dell P2714H HD and a monitor Dell P2715Q together on my new macpro?
I want to use a P2714H Dell HD and a Dell P2715Q monitor k 4 together on my new Mac Pro.
This is so that I can see the differences between the two.
I would like to know first if they can work together, and second, what are the pitfalls involved?
If someone has encountered this, I would really like to know.
I use Yosemite with the latest operating system.
They work very well when the two connected tot a 2103 end Mac Pro.
For the 4K monitor simply use a spirit cable mini displayport on each end and connect it to a port Thunderbolt
For the other monitor to get a cable with a mini displayport on one end and displayport on the other end. This monitor has a displayport input so use it.
Connect each monitor to another bus Thunderbolt
-
I have Firefox installed 37.0.1 on OpenSuse 13.2. I have a proxy server that uses a self-signed certificate, and I tried to add my certificate to the list of authorities and to check all the option displayed to be wz trust no chance.
I tried to restart firefox, but it did not help.
I did the same steps in chrome and it works fine.
appreciate any help.
After removing my .mozilla in my home directory. Add the certificate to the list of authorities in fact work.
-
When I use gmail printing is microscopic and the text enlarger does not correct.
When I use gmail, the print is so small that I can't read. A week ago, when I was in gmail, the print transformed suddenly from normal to microscopic, without my even having hit a key on the table. In fact, I'm writing this post on the Mozilla help page, printing just celebrated of readable in almost unreadable. In gmail, when I use "setting" and change the size of the police, he does nothing to expand the characters. If anyone has an answer, please be specific. I read solutions but who tell me to use the orange of Mozilla and the 'ladder', I don't know where they are.
I don't have this problem with I use Internet Explorer and the problem is forcing me to use this browser, which I prefer not to do.
Thank you everyone for your help.
Rob
You can have zoomed pages by accident.
Reset the zoom of page on pages that are causing problems.- View > Zoom > reset (Ctrl / command + 0 (zero))
- Press the ALT key, or press F10 to display the Menu bar.
-
Using Firefox version 29,0 and want tabs below the toolbars. Any ideas?
I am one of those users who prefer the tabs below the toolbars. In the version 29,0 it seems not be any solution to get them there. I searched all menu bars and passed the road to the evolution of the browser.tabs.tabsontop to false. Nothing has worked so far and I wouldn't want to load an earlier version of Firefox just for tabs. Someone else uses the version 29,0 and resolved this dilemma successfully?
Thanks for any help or advice... ahava1313
You can install the extension Classic theme restaurateur to restore some of the features that has been lost with the arrival of Australis.
-
I have an Intel Mac using OS 10.5.8 and Firefox v3.5.17. It works fine and I don't want to change I like Firefox 'exactly' like that! That said, I'll be forced to update soon, I'm afraid. Looking at and trying to update to the latest version, many conflicts have developed. The update regularly which brings me to the wrong version for my OS. So, which version will be later that will absolutely work for OS 10.5.8? WHY I find that 4.0 X is the best then, 16.0. is the right one?
Why are the versions so vastly separated?? Nothing makes sense. Please help before I convert to Chrome permanently!
Thank you.
You have only two ways out of updating to OS X 10.6.8 and Firefox 16.0.2 or version of ESR Firefox 10.0.12.
In regard to safety ESR version would be the best choice and would go for this version see if web pages continue to complain.
In case of complaint you can always try 16.0.2.
With older hardware, you will always hit sooner or later a barrier and will consider updating your hardware (which in this case may be a new computer). -
Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.
I work reasonable locally and on the web in all other browsers.
Stupid FF?
The HTML code is as follows:
<table WIDTH="770" CELLPADDING="0" CELLSPACING="0"> <tr VALIGN="TOP"> <td VALIGN="top" ALIGN="left" width="463"> <object WIDTH="340" HEIGHT="193"> <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE"> <param name="allowFullScreen" value="true"> <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193"> </object> </td> <td VALIGN="top" ALIGN="left" width="403"></td> </tr> </table>
I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.
Any thoughts?
If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.
Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
Alternatively, you can try to disable hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
-
I use Firefox 16.0.2 and Flash 11.5 502 plugin keeps crashing. I switch to Chrome or IE and have no problem. If I uninstall Flash plugin Firefox works fine - any suggestions as to what I can do? It happened for about two weeks and I keep waiting for an update of Firefox, assuming you know the problem. I run AVG Free anti-malware, firewall, Zone Alarm and Trusteer report.
For more information and other suggestions, see this article:
http://KB.mozillazine.org/Flash#Flash_Protected_Mode_issues_on_Windows_Vista_and_above -
I had two sources of camera recording the same audio - I want to be able to do is use mulitcam SYNCHRONIZE the audio and video at the same time and be able to use the two clips simultaneously in a video - multicam - how can we use the TWO videos? In Multicam, I can only go to one video at a time - is to detach anyway, so I can trim two camera responsition camera and 1 on a 16:9 screen? What would be the best way to do this? Any help would be welcome - Ty
Two PPut copies the multicam in editing element, one on the other.
-
I just started to use Firefox on my laptop and I don't yet have the hang of it!
See:
-
I am facing a strange situation. I used Win7 on BootCamp. Last week attempted to upgrade to Win10. After the upgrade is perfect, I could not connect to the wifi or wired internet. called the Apple support, Windows supports, no one would help you. Downgraded to Win7, after decommissioning, apple wireless key board and mouse magic does not work. Called Apple support, after nearly 90 minutes of interaction with them, ZERO, no solution result. Apple support told me that an Apple engineer will call me at my appointed time. A call came, but no one answered.
So, today did a clean install of Win10 through BootCamp. All right, BUT I still can't use apple wireless key board and mouse magic. Can someone help me with this situation? Apple & Microsoft support engineers have failed to help out me. Thanks in advance.
Have you installed the Boot Camp Windows Support software?
If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support
-
My iTunes does not detect my iPad. I use Windows 10, Norton 360 and the latest version of iTunes. All software are up to date, and each says it works correctly.
Turn off or get rid of Norton. I really don't see why you need it.
Maybe you are looking for
-
How to disable the updates of the beta chain?
Beta updates disable my report of Trusteer, which often does not support updating. How to retire from the beta update channel?
-
Update Firefox 18,0 on a MacBook running Mac OS 10.6. Non-static moment of window display areas (squares url & search, main area of window, etc.) incorrectly, similar to what happens when a program thinks that the image (for example) is 500 pixels wi
-
Upgrade of VAIO SVT15115CXS-SSD
Dear friends, I have sony vaio SVT1511CXS (SVT151A11U) with 1 TB HDD and SSD of 24 GB container. I need to replace the SSD more capacity SSD inorder to install the top OS. Please let me know 1 is it possible / updated 24 GB SSD in to higher capasity?
-
Cannot use USB Linux Live on Predator 17 G9-791
Hi all! I try to get my Predator to start a Linux Live USB with persistence (note: I don't mean to install Linux, just restart). I know that the ISO is good (I checked the MD5 and it redownloaded few times) and I've used several different creators of
-
can not scan large dockument in a file and have the pages come out in order
Hello and ty 4 your time - victory runing 7-64 printer is hp officejet pro 8600 (network) PDF prog. OmniPage is ultimate. my project is to digitize a 191 total page (duplex) 391. I select Save as pdf, leter size, black and white, 200 dpi (according