Using Open manage Array Manager in the MMC?

Similar Questions

• Using Open manage replace Raid 5 HD

  Everyone,

  I must say first that I'm not a person of software.  However, no one in my company has no experience in the Raid arrays, despite having inherited several systems.  I apologize if my questions and follow-ups are unclear.  I turn a little in the darkest of time.

  I have a Server System 2003 with a Raid 5 array.  One of my hard drives die on me.  I had two identical disks removed from another computer with its own table.

  Using Open manage, I stumbled my way through to get the foreign configuration off this drive and have even allowed.  Now, it's ready state, with the rest of the degraded Raid.  I went to the Virtual Drive section.  For this record, I expect something like rebuild or reconfigure the table or something like that.  Here are the options I see:

  Delete

  Re-branded/decommission dedicated rescue

  Blink

  Unblink

  Change of name

  Change policy

  Replace the drive Member

  My question is, how to make the table to add this record and they start using it?  I want to get the table and running and the degraded state.  I thought it was hot, so should I just pull out and push again?

  Sorry to be a fool this inexperienced.  Any help would be appreciated.  Unfortunately, I was a little thrown to the Wolves of my group on this one.

  Thank you

  Hello.

  It was OK for you to clear the foreign configuration in order to get rid of existing metadata on the drive. Under the selection of available tasks. Assign as dedicated hot spare disk. This will allow the drive to rebuild the table. You can monitor the progress of the reconstruction in the OpenManage Server Administrator (OMSA).

• change icons: using Picture Manager, all the icons on the screen changed

  While using Picture Manager changed all the icons on the screen. now I can't get picture on a Manager with. System Restore did not work

  Try to rebuild the icon cache http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html to see if that fixes things.

  I hope this helps. If this isn't the case, after return and we will try something else.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Last Version of Flash Player used doenload - Manager of the establishment is open?

  I try to install the latest version of Flash player and get an error message indicating that the flash player settings manager is open and I need to shut it down. I have no product Adobe running at all and it doesn't seem to be an option in the control panel to close configuration manager. Help!

  I deleted the file FlashPlayerCPLApp in the System32 folder and the problem is still there.  I could not find one

  SysWOW64 folder (maybe because my Windows 7 is for 32 bit?).  Unless there was something else I was

  supposed to do, this has not fixed the problem.

• I use Open-Web safe fonts, and the text becomes an Image. Why?

  When I use without opening the text becomes an image and when I use Arial text. How to save without open text?

  Without opening is available as a Web dashboard font.

  What section of the menu police have you selected without opening of? If it has been selected in the "System Fonts" from the menu police section then it will be output as an image. To use the Web version of fonts, click 'Add Web Fonts... "in the font menu, then choose" open without "in the edge Web fonts available.

• Transaction management in the ADF Application using Dynamic Shell

  Hi all

  I use Jdev 12.1.2. We have an application built using design pattern of Shell of dynamic user interface where each workflow in the application will open in a separate tab. So my question here relates by using transaction management in the workflow.

  I read in many places where we are asked to avoid always using "start new Transaction" as it would open multiple connection. But I also vaguely remember reading that best practices to use in an application built using by using Dynamic user interface Shell, is to have isolated Datacontrol with always start new Transaction.

  So could indicate the recommended approach for impact Shell of the user interface and the performance of the approach?

  Note: We have just a data control in our application.

  Thanks in advance.

  Hello

  the transaction is not defined by the shell of the dynamic tab but the workflow. The shell of the dynamic tab displays only the workflow at a glance. If you plan to display a single feed task several times as tabs in a dynamic tab shell, each indicating a different set of data, then you use "isolate" scope of data control or "adaptive databinding (https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf). If you are using remote data controls then - if you use ADF BC - each instance of the workflow (in shell dynamic tab tab) creates its own connection to the base and the transaction. Workflow transaction parameters are passed to it.

  So use case issues: If you only display a single instance of a workflow tasks at once in a tab of the shell of the dynamic tab so that you can use the scope of shared control (default) data without doing anything. I however you must show the same workflow multiple times then reach isolated from control data or link Adaptive is the implementation, you should go for. The first option - data control isolated - is expensive because it creates additional database connections. There if its use cases.

  Frank

• Dell Open Manage - application compatibility

  Hello

  First post here. I work for a large company and I am the 'rookie' of the service infrastructure. The company I represent have about 500 sites which about 85% have installed Dell Power Edge 310 servers. We seek to deploy Dell Open manage through the estate to monitor the performance of the server etc etc. I had to know if we could use it on other server brands, such as Fujitsu, HP and IBM.  In our data center, we use HP servers.

  So my question is could we use Dell manage open on other servers from manufacturers? And we could use it with the ILO? I know other programs of management software for the likes of HP etc etc, but as you can see I am, to say the least, a bit out of my depth.

  Any help/advice/guidance would be greatly appreciated.

  Thanks in advance.

  No, OMSA works on Dell supported running OS servers.  In other words, that it will work on:

  • non-Dell servers
  • If other computers (including Dell)
  • Servers not made Dell supported operating systems (client OS (XP, V, 7, 8), including the lack of Service Packs)

• Using Recovery Manager on a Netbook with a new hard drive

  I have the HP Mini 110-3015DX netbook under Windows 7 Home Premium.  It has been upgraded to Windows 7 Starter Edition.  It comes preinstalled with a 160 GB hard drive.

  Not too long ago, I cloned the original to a new hard drive to 500 GB hard drive and switched them.  The netbook boots fine, and all of my programs seem to work as well as before... except one: Recovery Manager.  Now, I can not format my hard drive and reinstall the operating system and drivers.

  When I chose a recovery using Recovery Manager plan, the computer restarts as normal, but instead of see more menu options, I get a message on the new hardware detected, as well as a request to contact a network administrator or something like that.  However, I am unable to continue with the format and have to restart in Windows.

  Question: is it possible to use Recovery Manager on a netbook when you change hard drives?  If so, how?

  The Recovery Manager appears when I press the F11 key at startup to the top.

  Indeed, since the display of my original message, I tried a USB flash drive recovery option.  Everything seemed to go very well, that the recovery process has been done, when suddenly a message popped up saying the installation was incomplete, is nearly 90%.  I was asked to choose two options, which none have been identified.  So I turned off the netbook, waited a bit and turned it back.  I was then able to complete the initial installation of Windows 7, where they ask you in the name of the computer, choose your region and type your network password... etc...

  Once more, I thought that everything would be alright.  I then clicked on the icon of the computer and noticed that the size of my hard drive had been reduced from 500 GB to about 60 GB or more!  I tried to use a program 3rd party to recover the huge no allocated space, but it did not work.

  I've been working on this problem for hours, doing research, try the different options, but nothing works.  I give up.  However, I appreciate your response.  Thank you.

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• Used to install Flash Player - said the Flash Player Settings Manager is open

  I can't install Flash Player on my Win7 64 bit PC. When you run the installation from the download page, I just get the error 'failed to install - unknown error. "If I run the installation of the stand-alone installer I get the message"Open Flash Player Settings Manager"and an"exit"button

  I don't know what is the Flash Player Settings Manager or where to find it. It seems certainly not 'open', anywhere where I can see.

  There was a discussion on this topic. The solution that many people found useful is:

  1. look for the "FlashPlayerCPLApp.cpl" file in the following folders:

  On systems 32 - bits, C:\Windows\system32

  On 64 - bits, C:\Windows\syswow64 systems

  2 delete this file.

  If you do not have permission to remove the same, use a third party application like Unlocker. (http://www.emptyloop.com/unlocker/)

  3. try to install or uninstall.

  Thank you

• In FF password manager (30.0), when you open change, what are all the fields and how you fill them?

  When you open Edit, there are two choices: Web form and annotated.
  What is the difference?

  Then, there are fields for the host, submit the prefix, username, password, etc.
  How to fill out these fields?

  When you click for the Manager "assumes that of the current Page", all fields not necessarily fill up, so it's just for the username and password?
  I use constantly editing function, so it's a little strange to not see that further instructions here.

  When I click on tools, the saved password dialog box is on the list, so it's in my toolbar all the time.
  I use it constantly.

  What is the last password security? I know there are competitors of ideas. What is Mozilla?

  Thank you.

  Personally, I do not record the connections site in Firefox. The FireFTP extension records the FTP connections, so I use a master password to protect the people.

  I know I should finally pass a manager based password on a cloud, because if often, I forgot my login and have to reset, but... I have not bypassed by comparing the features and tests.

• I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  [Moved from comments]

  Right-click on a file, select open with, again, and select the appropriate program in the list.  Make sure that the checkbox "always use..." "is checked.

  Repeat for other types of files that are false

• used open DVD player and is not detected by my computer or Device Manager

  Portable Hi, im having a problem with my dvd player, it worked fine, then I stop my computer one night, woke up the next day, tried to open my dvd drive but it used open... so I checked my computer and it has not been detected there, so I took the next step and active Device Manager... it has not been shown here either ive deleted filters upper and lower, but nothing works, I still have to check the bios because im not sure 100% what to look for or even how to check the bios, Ive only had my laptop a year and keep it in good condition... I hope it's a software problem and I don't have to send it for repair.

  any advice would be appreciated

  OK, I tried the sfc/scan command prompt now he got 77% and said that he could not perform the requested operation, I'll try a few more things you have posted and get back to you with the results

  Thanks for the help.

  I took your advice and tried Panda antivirus so far its adware found one, an attepmts of two Trojans and blocked to high jack my wifi connection, it's much better than my old av that has not detected any of these things!

  OK I just finished trying all the checks you mentioned... but nothing helps, looks like it's a hardware faliure after all, well.

  Thanks for the help anyway.

• Open manage - can be used on a cluster NIC.

  The subject is a little weird and don't know where to put it, but here's the situation.

  I have a Power edge 515. I have two GB NIC.

  I noticed on my a hostname called idrac-1SNMFP1 DHCP server.  I have never see this before. It was just sort of. I ping and it comes back on the network with an ip address of 10.1.0.55 and his life.

  I searched and found that idrac stands for "integrated dell remote access controller".

  OK, so I'm going on my dell servers and "10.1.0.55 ping - t" on a single computer carefully start cables nw on the servers where I can for a second or two. I see that one of the servers is indeed the IP address.  I can enter the lcd screen and see that this is the ip address of this server maintenance port.

  I have implemented open manage on that server. Here are my questions?

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Hello col288

  col288

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  I do not know. I have something suspicious about your environment or configuration has changed.

  col288

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  You can change from the iDRAC via CTL E BIOS when starting, via the web interface of iDRAC, or using the racadm within the operating system commands. http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3205.racadm-command-line-interface-for-DRAC.aspx

  col288

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  It is because this IP address is not local to the operating system. Port 1311 is an IPMI communication port to access the iDRAC. You can use any IP address assigned to the operating system, a loopback address or a host name of the system with the designation of port 1311 and should communicate to the iDRAC via IPMI. The 10.1.0.55 address IP is not local to the operating system, so it's off to your network, then he's looking for. IDRAC is not accessible via the port 1311 connections remotely. This port is only available locally. If you use https://10.1.0.55 it should display the web page for the iDRAC.

  col288

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Teaming has nothing to do with it. Collection is managed by the driver and the operating system. It has its own dedicated port iDRAC IP address (10.1.0.55) is on a port shared with one of the LAN on motherboards. If it is shared among the LOM are partitioned so that the bandwidth is dedicated to iDRAC. If you bought the add-on from the company and have iDRAC set dedicated mode then it uses its own network interface. The port of iDRAC has a symbol of a key on it.

  Thank you

• Getting started with Open manage the essential problem of Server Data Sources

  I installed a server for and with Open Manage Server Essentials... discovered my network and found a lot of good servers... 1 server has a green check mark and you can see in the Data Source, it uses the administrator of the server with the Version 7.1.0. I downloaded the OMSA node in 7.4.0.2 on another server, etc. SNMP installed and the server is located with a gray question mark and the data source is an Agent of Version 2.0 of Windows Hardware... is anyone has any advice how to handle? And want to install server after the server to see it in OME centrally on a single management server...

  Sorry for my bad English and thanks for all the info.

  Thomas

  OK, so make sure you check out the first installation tutorial in the console of the OME.

  1. you must on the box, so 7.4 OMSA's fine.

  2. be sure that you did the necessary SNMP parameters in the box of the OMSA (services.msc, SNMP, accept any host paackets - or use the ip address).

  3. you can use the tool for troubleshooting Dell desktop OME to test SNMP connectivity to the server with OMSA on it.

  4. I think that the FAQ (delltechcenter.com/ome) contains some tips in the discovery section (3.4)?

  That should make us started.

  Thank you

  Rob