Using Open manage replace Raid 5 HD

Similar Questions

• Using Open manage Array Manager in the MMC?

  Hello

  I'm more accustomed to Windows 2000 Server and older versions of the software OM. My old servers named range Manager from within the MMC when I click on disk management. Is it possible to achieve this with WS2003 R2 SP2 and the open current management software. I can't find the "MMC" folder on the installation disc.

  
  

• I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  [Moved from comments]

  Right-click on a file, select open with, again, and select the appropriate program in the list.  Make sure that the checkbox "always use..." "is checked.

  Repeat for other types of files that are false

• used open DVD player and is not detected by my computer or Device Manager

  Portable Hi, im having a problem with my dvd player, it worked fine, then I stop my computer one night, woke up the next day, tried to open my dvd drive but it used open... so I checked my computer and it has not been detected there, so I took the next step and active Device Manager... it has not been shown here either ive deleted filters upper and lower, but nothing works, I still have to check the bios because im not sure 100% what to look for or even how to check the bios, Ive only had my laptop a year and keep it in good condition... I hope it's a software problem and I don't have to send it for repair.

  any advice would be appreciated

  OK, I tried the sfc/scan command prompt now he got 77% and said that he could not perform the requested operation, I'll try a few more things you have posted and get back to you with the results

  Thanks for the help.

  I took your advice and tried Panda antivirus so far its adware found one, an attepmts of two Trojans and blocked to high jack my wifi connection, it's much better than my old av that has not detected any of these things!

  OK I just finished trying all the checks you mentioned... but nothing helps, looks like it's a hardware faliure after all, well.

  Thanks for the help anyway.

• Open manage - can be used on a cluster NIC.

  The subject is a little weird and don't know where to put it, but here's the situation.

  I have a Power edge 515. I have two GB NIC.

  I noticed on my a hostname called idrac-1SNMFP1 DHCP server.  I have never see this before. It was just sort of. I ping and it comes back on the network with an ip address of 10.1.0.55 and his life.

  I searched and found that idrac stands for "integrated dell remote access controller".

  OK, so I'm going on my dell servers and "10.1.0.55 ping - t" on a single computer carefully start cables nw on the servers where I can for a second or two. I see that one of the servers is indeed the IP address.  I can enter the lcd screen and see that this is the ip address of this server maintenance port.

  I have implemented open manage on that server. Here are my questions?

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Hello col288

  col288

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  I do not know. I have something suspicious about your environment or configuration has changed.

  col288

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  You can change from the iDRAC via CTL E BIOS when starting, via the web interface of iDRAC, or using the racadm within the operating system commands. http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3205.racadm-command-line-interface-for-DRAC.aspx

  col288

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  It is because this IP address is not local to the operating system. Port 1311 is an IPMI communication port to access the iDRAC. You can use any IP address assigned to the operating system, a loopback address or a host name of the system with the designation of port 1311 and should communicate to the iDRAC via IPMI. The 10.1.0.55 address IP is not local to the operating system, so it's off to your network, then he's looking for. IDRAC is not accessible via the port 1311 connections remotely. This port is only available locally. If you use https://10.1.0.55 it should display the web page for the iDRAC.

  col288

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Teaming has nothing to do with it. Collection is managed by the driver and the operating system. It has its own dedicated port iDRAC IP address (10.1.0.55) is on a port shared with one of the LAN on motherboards. If it is shared among the LOM are partitioned so that the bandwidth is dedicated to iDRAC. If you bought the add-on from the company and have iDRAC set dedicated mode then it uses its own network interface. The port of iDRAC has a symbol of a key on it.

  Thank you

• How can I resize a picture using Picture Manager please?

  How can I resize picture using Picture Manager please? Let's say I want to put 4 x 6 cm for a given photo dimensions. I tried to resize , but is it compresses the picture to send by e-mail etc... It is basically a photo compressor.

  How can I resize picture using Picture Manager please? Let's say I want to put 4 x 6 cm for a given photo dimensions. I tried to resize , but is it compresses the picture to send by e-mail etc... It is basically a photo compressor.

  =============================
  If you are running Windows XP... it is a free software
  The PowerToy that is useful for resizing of the pictures:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Go to the following link and download and
  install: ImageResizer.exe
  http://www.Microsoft.com/windowsxp/downloads/PowerToys/xppowertoys.mspx
  (does not work on Vista)

  Then, you can open any folder containing
  images and you will have an option to resize.
  Just right click the selected image files and
  Choose resize images in the menu. You
  can select a picture or an entire group.

  The program will place the resized in copies
  the folder with your originals.
  (Tip: * never * overwrite your originals)

  To ensure that images in both portrait and
  landscape orientation are resized to the
  same dimensions... go to... Advanced...
  and enter the largest number in these two areas.
  IOW... for 600 x 800... Enter 800 in these two areas.

  (Tip: even if you resize the Photos to the same)
  dimensions (original)... the file size will be greatly
  reduced).

  =====

  If you want to change the proportions of a picture...
  you have to reframe it... otherwise it will be distorted.

  The following freeware has a tool of good harvest.
  Just select a thumbnail and press X to open the
  Council for culture. (Tip: always save your editing / cropped /)
  photos resized under a new name)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  The following tutorial provides information on the creation of a
  2 "x 2" photo ID, but the steps would be
  basically the same for any size.

  Now, open the program and select (highlight)
  the image you want to change.

  According to... to... Edit / crop Panel (or type... (X)

  Click on the button 'Set Ratios of paper'.
  (it's just to the right of the proportion of paper
  fall of window)

  Click on the 'Add' button and enter... 2 x 2 "
  Click on... OK / OKAY... (this will give you the square
  format you need)

  You can resize the selection frame by dragging
  reposition by dragging corner handles
  the arrow of the 4 channels. At the end... Click on the 'culture '.
  button.

  Now... to... File / save as...
  Choose a backup location, enter a new name for
  the photo and choose a format to save in...
  Left click on the Save"" button.

  =====

  Info about photo manager
  If you resize a photo with Picture Manager and
  save it when you see the dialog box saying:

  "There are changes that have not been saved"

  The original photo will be overwritten (replaced)
  with the rezized version... IOW the original will
  be unrecoverable.

  To keep two versions of the picture, resize it
  and go... File / save as... Enter a new name for
  version resized and on the left, click on the "Save" button.

  When you close the photo manager and see the
  dialog box:

  "There are changes that have not been saved"

  On the left, click the do not save"" button. Now
  have both versions.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.

• Error file open/create/replace FPGA

  Hey guys,.

  I'm having a problem where, when I try to use reading worksheet VI in my RT Host Application, it returns error code 7 (can't find a file or folder does not exist) when it calls the function of file open/create/replace. The feature works very well when used in a standalone VI that is not part of the FPGA project and I made sure that my path is correct, but for some reason, it does not work in my FPGA application. I have placed sensors and ensured that the correct path to the file is linked to the input function but the error persists. The refnum output file returns 0, not "not A Refnum". Does anyone have an idea on why I get this error or if I'm the only one? Any help would be appreciated. Thank you.

  
  

• 6 open/create/replace the file in NI_Excel.lvclass:Save report error to

  I have an application that works on LV60 and when lance in LV86 I get the following error: error 6 took place in open/create/replace file in NI_Excel.lvclassave report to the File.vi-> SWF001 Test.vi Possible reason (s): LabVIEW: file generic i/o error. = OR-488: IO operation abandoned. C:\SWF001 IO Files\1_Single.xls the application made: New Report.vi Excel get Worksheet.vi Excel easy Table.vi Excel easy Text.vi (4 of them) save the report to the File.vi Report.vi to throw all in a nice string (errors and report-in/out) as is typical for some reason any I get this error message. I use it with Excel 2003 SP3 and the spreadsheet contains macros (and I get a prompt ' should I enable macros: "(Yes), I do not have with LV60 and the old version of Excel). This is probably not the problem? but deserves to be mentioned. The file exists on the system (and it seems that the application is to write on it with success - but maybe truncated as the error indicates-i cannot say with certainty). I can open and save the Excel file independently LV very well. Clues? Thank you very much! -David

  
  

• In the file open/create/replace bug

  I found this problem in LabVIEW 2009. The Boolean indicator doesn't seem to work properly in the first snippet. It returns TRUE even with a valid path. With some trial and error, I found a work around that will work correctly at the moment. I just wire an Out error after the file open/create/replace (excerpt of a second). Is this a bug? I'm doing something wrong?

  I had a lot of code that uses it to test to search for existing files, and then the output of wire to a statement box. I know there's also a check if the folder/file available Exists.vi. I wouldn't spend a lot of time to change all my code if there is a known bug and it will be corrected in the next update. If this isn't a bug to know, where can I submit it?

  

  

  This isn't a bug. You have the race condition between the indicator and close REF.

  Use it in this way:

  

  Andrey.

• What should I use for a replacement of WinMail in Windows.

  What should I use for a replacement from WinMail in Windows 7 when requires it a number of sites to meet an address or a link that the site offers an answer or a question.  I have msn, yahoo & gmail but lost WinMail when I've upgraded from Vista to Windows7.
  I lost WinMail thur a mistake some time & it was a nighmare tring to meet links on sites that requires to open a format Outlook, Outlook Express or WinMail.

  I have msn (hotmail), yaho & gmail, but none of them will come when I'm trying to respond to the link sites for a response. If one of those that should be used, how it equal in Windows7?

  Windows Update has nothing to do with the upgrade of Windows.

  Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Oiseau-tonnerre) , and then set it as a default for mail in CUSTOM (<>) Set Program Access and defaults of the computer before any function article send to or MailTo will become available.

  You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  Support for Windows Live Mail (which will be able to import your data from Windows Mail Backup), you will find in this public newsgroup:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Could not open "Manage audio devices" Control Panel configuration

  Could not open "Manage audio devices" of the control panel in Windows 7, but it later emerged to the waking from sleep

  Odd error, no idea of the cause.  When I start my computer and try to go to the sound control panel to manage my audio devices (at the present time, are what I plugged my SoundBlaster X - Fi Gamer and a Logitech 9000 webcam with microphone), often the Control Panel won't open, if I select "Manage audio devices" in the main window of the Control Panel, or if I select "playback devices". "Recording devices" or "Sounds" of the Volume in the notification area icon.  Then, when the computer is put to sleep and then woke up from his sleep, control panel of his poster.

  I don't know how or why, but something seems to interfere with the sound control panel.  Any ideas?  Anyone see the problem?

  (I use the drivers SoundBlaster to day and now Windows 7.  With Home Premium, incidentally).

  This problem is corrected... The cause of the problem was a bad logitech driver for the microphone to their webcams (I have the webcam for laptop)... In the new versions of logitech drivers, this problem has been fixed. I did a test of the beta with logitech to resolve this difficulty. Go to logitech and download the latest drivers for your webcam and it should fix this error.

  Sven

• Is it possible to open 'manage connections' app?

  Hi guys,.

  Is it possible to open 'manage connections' app?

  My application needs WLAN. So when it starts, I check if wifi is on and if it is connected to the network. If it isn't I would open "manage connections" and allow the user to connect. Is this possible?

  I was looking at the ApplicationManager class but did not understand if it is possible.

  Thanks for the replies

  I got an answer on another forum. It might be useful for someone. The solution is

  try {
           ApplicationManager.getApplicationManager().launch("net_rim_bb_manage_connections");
      } catch (ApplicationManagerException e) {
           // TODO Auto-generated catch block
           e.printStackTrace();
      }
  

• Foglight and Dell Open Manager Application to monitor temperatures

  I would like to know how I would be able to use Foglight to monitor Dell servers.

  For example I'd like to monitor the temperature. These servers have Dell Open Manager installed on then. Can use/get Foglight all alerts to Dell Open manager?

  You can use the SNMP integration to monitor traps HW via Foglight.  Check out this post for a primer http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx

• BlackBerry smartphones copying files using Media Manager is very slow

  Hello

  I have four zip files, totaling about 2 MB, I downloaded on my memory card and wanted to transfer to my laptop.

  Because I enabled encryption and the .rem files, I use Media Manager.

  The files take more than 20 minutes to cross. When I used with Windows Explorer before mass storage mode, move only a few hundred MB file took seconds, so I don't think it's a hardware problem.

  He also copied all the files twice, adding '00000' before the extension, for example, filename.zip.rem became filename.zip and name of file 00000.zip. Both can be open on the laptop as usual.

  Does anyone have an idea, what could be the cause?

  Thank you

  Paul

  Hi and welcome to the forums!

  Unless you have national secrets on your Blackberry I would disable content protection.

  It slows down the Blackberry to a crawl.

  Try to read this article and see if that can explain it more detail

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB16088&sliceId=1&docTy...