Using PowerCli to display the location of the folder vcentre
Hello
I adjusted began using the Cli power today. I managed to get some info on the internet but I am of course to have a problem with the script im its simple but at this stage I don't know enough about it.
Basically I want thescript to output to a csv file with the name of the Virtual Machine, Datastore, host and his VCentre folder location.
Everything is be filled except the get-file colum who im hoping will indicate the location of the folder VCentre
Get - VM | Select Name, @{N = 'Cluster'; {E = {Get-Cluster - VM $_}}, '
@{N = "ESX host"; {E = {Get-VMHost - VM $_}}, '
@{N = "VICont"; {E = {Get-file - VM $_}}, '
@{N = "Datastore"; {E = {Get-Datastore - VM $_}} | `
Export-Csv - NoTypeInformation C:\VM_CLuster_Host_Datastore1.csv
Thank you very much
Ryan
With recursion a bit, you can go a long way
Get-VM | Select-Object -property Name, @{N="Cluster";E={$_.VMhost.Parent}}, @{N="ESX Host";E={$_.VMHost}}, @{N="VICont";E={ $nodes = @() $obj = $_.ExtensionData while ($obj.Parent){ $obj = Get-View $obj.Parent if("Datacenters","vm" -notcontains $obj.Name){ $nodes += $obj.Name } } [string]::Join('/',$nodes[($nodes.Count - 1)..0])}},@{N="Datastore";E={Get-Datastore -VM $_}} | Export-Csv -NoTypeInformation C:\VM_CLuster_Host_Datastore1.csv
Tags: VMware
Similar Questions
-
Using PowerCLI to recover the capacity of volume comments data
I am using PowerCLI to declare on the volume letter and free space associated with a guest computer. I am currently addressing this problem through the extensiondata of the VM guest and then placing the properties I want in a PSObject.
The question that I am running is that numeric values keep coming up as zero when it is inside the loop for, although they correctly resolve by themselves. One thing I found interesting was these two upcoming properties like "System.Nullable [long"] when executing GetType(), but I don't know if that is related to the question.
The script is below, and I changed the font color on the problem section. I'd appreciate any help.
# Pre - performance Variables
$USCulture = New-Object - TypeName System.Globalization.CultureInfo - ArgumentList "en - us".
$USCulture.NumberFormat.PercentDecimalDigits = 2
$USCulture.NumberFormat.NumberDecimalDigits = 2
Guest computers #Get
[table] $vmguests = $vmcluster | Get - VM
foreach ($vmguest to $vmguests)
{
$vmguestinfo = new-Object - TypeName System.Management.Automation.PSObject
$vmguestinfo | Add-Member - MemberType NoteProperty-Name "Hostname" - value $vmguest.extensiondata.guest.Hostname
$vmguestinfo | Add-Member - MemberType NoteProperty-Name "GuestState"-$vmguest.extensiondata.guest.GuestState value
$vmguestinfo | Add-Member - MemberType NoteProperty-Name 'GuestFullName'-$vmguest.extensiondata.guest.GuestFullName value
$vmguesthdds = $vmguest. ExtensionData.Guest.Disk
for ($i = 0; $i - lt $vmguesthdds. Length; $i++)
{
$vmguestinfo | Add-Member - MemberType NoteProperty-Name ' DiskPath$ I '-$vmguesthdds [$i] value. DiskPath
$vmguestinfo | Add-Member - MemberType ScriptProperty-Name ' CapacityGB$ I "-value {($vmguesthdds [$i]. Capacity). ToString ("N", $USCulture)}
$vmguestinfo | Add-Member - MemberType ScriptProperty-Name ' UsedSpaceGB$ I "-value {[System.Decimal]: Subtract ($vmguesthdds [$i].} Capacity, $vmguesthdds [$i]. FreeSpace). ToString ("N", $USCulture)}
$vmguestinfo | Add-Member - MemberType ScriptProperty-Name ' FreeSpacePercent$ I "-value {[System.Decimal]: Divide ($vmguesthdds [$i].} FreeSpace), ($vmguesthdds [$i]. Capacity). ToString ("P", $USCulture)}
}
[table] $vmguestresults += $vmguestinfo
}
Thank you
Yes, he had a few typos in the code.
I corrected which, in the code and the attachment.
Try this one.
I'm afraid that I can't achieve this GitHub repository.
A search on your GitHub account does not return either
-
How to use PowerCLI to activate the function VM NPIV and config setting?
Hi all:
I'm having a problem on PowerCLI.
Can I use PowerCLI for NPIV to the VM config?
OK, I see. This is possible with the operator "set".
Note that the script must convert the hexadecimal number WWN in a 64-bit decimal number.
$vmName = "MyVM" $nodeWWN = "28:2b:00:0c:29:00:00:07" $portWWN = "28:2b:00:0c:29:00:00:08" # Convert WWN string to 64-bit number $nodeWWN64 = [int64]("0x" + $nodeWWN.Replace(":","")) $portWWN64 = [int64]("0x" + $portWWN.Replace(":","")) # Activate NPIV $spec = New-Object VMware.Vim.VirtualMachineConfigSpec $spec.NpivDesiredNodeWwns = 0 $spec.NpivDesiredPortWwns = 0 $spec.NpivTemporaryDisabled = $false $spec.NpivWorldWideNameOp = "set" $spec.NpivPortWorldWideName = @($portWWN64) $spec.NpivNodeWorldWideName = @($nodeWWN64) $vm = Get-VM -Name $vmName $vm.ExtensionData.ReconfigVM($spec)
You can use the cmdlet New - hard drive to attach a disc RDM. Make sure to specify a type of "gross" on the parameter - DiskType.
You ID LUN with the parameter - DeviceName.
____________
Blog: LucD notes
Twitter: lucd22
-
Hi, this is how things went wrong: I tried to restrict access to a folder on our server by using the permissions denied, file security. When I try to locate the file for other machines connected to the server I can not see it now, which is kind of what I was aiming for. However, I am not sure what I have done because even though I can see the folder by using the server machine, I can't actually access.
When you try to open the file I get now: \Accounts documents refers to a location that is unavailable, it could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the internet or to your network and try agaiun. If it can't be located, the information may have been moved to a different location.
When I right click and try and go to the tab Essensials in this folder, I get: the required guarantee inforamtion is either unavailable or cannot be displayed. Help please!
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you
-
I have been recently UEM9, AppVol 2.10 in my environment of Horizon 7 on some Machines Windows 7 Linked Clone (systems no-no intentionally) initially the connection time was around 30secs with Agent display 7, UEM9, AppVol 2.10 installed with a mandatory profiles with the folder redirection MSFT (Windows 7), but as I expanded stable about 30 user... and they started to use the system on a regular basis I started to do & see logins for one more minute. Nothing has changed in my environment and the material is extremely less use so Im trying to figure out what is causing the delay in the connection. Does anyone else know extremely long connections using UEM9?
I could solve this problem by updating 10.0.6 to 10.0.8 vmware tools. This login corrected and the performance of the virtual desktop.
-
Display the folder Manager followed by employees who report to that Manager.
Hi friends,
After a long time, I guess.
I need your ideas on how to perform the tasks below.
I have 2 tables as below:
(1) BISHOP
mgr_id (pk), mgr_name
(2) EMP
emp_id (PK), ename, mgr_id (fk)
mgr_id is the key referential in this case.
Now, all I want is first display mgr_id, mgr_name and then display the employees to this Manager.
Thanks in advance.MGR TABLE ========= MGR_ID MGR_NAME ------ --------- 1 David 2 Ray EMP TABLE ========= EMP_ID ENAME MGR_ID ------ ------ ------ 1001 John 1 1002 Nancy 1 1003 Edward 2 1004 Jack 2 QUERY RESULTS ============= TYPE ID NAME ---- ---- ------ Manager 1 David Employee 1001 John Employee 1002 Nancy Manager 2 Ray Employee 1003 Edward Employee 1004 Jack
-Raj
Published by: Teku on April 20, 2009 12:04Hi, Raj,
Do a UNION ALL operation to get the data from the two tables.
Include additional columns for sorting: mgr_id (so a manager and those covered by the crèche will be separate) and another column (rnk, bleow) in order to ensure that the Manager will come first in each group.In SQL * Plus, you can use the COLUMN... NOPRINT to keep these additional columns to appear in reality.
Otherwise, you can calculate the new columns in a subquery, like this:WITH union_data AS ( SELECT mgr_id AS id , mgr_name AS name , mgr_id , 1 AS rnk FROM mgr UNION ALL SELECT emp_id AS id , ename AS name , mgr_id , 2 AS rnk FROM emp ) SELECT id , name FROM union_data ORDER BY mgr_id , rnk , id ;
-
Windows XP version 3? The record has been one of my photos, I created.
Hi Digdragon,
· How many accounts user is present on the computer?
Follow the suggestions below for a possible solution:
Method 1: If there are several accounts of users present on the computer then do you disconnect other users accounts and try to delete the folder.
Method 2: If the method above is not enough you can start the computer in safe mode and try to delete the folder.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Hope this information helps.
-
Use Loader() to display the image in the Simulator?
Hi all
This is a very specific question: it seems that the Flex Hero Loader() class does not work when loading an image file in the Simulator.
When to use flash.display.Loader to load and display an image file,
It works fine when run on emulator Burrito, but nothing appears when running PlayBook Simulator (the image file is accessible on the Simulator: I can see his name and size)
Anyone know if something is wrong with the Simulator and Loader()?
Thank you.
Same problem with the Image of QNX,
the problem is on the URL, which should include "file://".
as described in your solution here:
Thank you.
-
using powercli to control the limit disk IOPS / s
Hey there, I need to limit the OPS are / s of the drives connected to my virtual machines via powercli.
I use the following command:
Get - VM "vm_name" | Get-VMResourceConfiguration | Game-VMResourceconfiguration-DiskResourceConfiguration - configuration DiskLimitIOPerSecond 100
But it gives an error:
Game-VMResourceConfiguration: cannot bind parameter 'Configuration '. Could not convert the value of 'DiskResourceConfiguration' to type 'System.String '.
' of type 'VMware.VimAutomation.ViCore.Types.V1.VM.VMResourceConfiguration'.
On line: 1 char: 86
+ Get - VM $vm | Get-VMResourceConfiguration | Game-VMResourceconfiguration-configuration < < < < DiskResourceConfiguration - 10 DiskLimitIOPerSecond
0
+ CategoryInfo: InvalidArgument: (:)) [game-VMResourceConfiguration], ParameterBindingException)
+ FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.SetVMResourceConfigurationCan someone please suggest me where wrong me?
Try it like this
foreach($group in (Import-Csv C:\vmiopslimit.csv -UseCulture | Group-Object -Property vmName)){ $vm = Get-VM -Name $group.Name $spec = New-Object VMware.Vim.VirtualMachineConfigSpec $vm.ExtensionData.Config.Hardware.Device | where {$_ -is [VMware.Vim.VirtualDisk]} | %{ $dev = New-Object VMware.Vim.VirtualDeviceConfigSpec $dev.Operation = "edit" $dev.Device = $_ $label = $_.DeviceInfo.Label $dev.Device.StorageIOAllocation.Limit = $group.Group | where {$_.Harddisk -eq $label} | Select -ExpandProperty IOPSLimit $spec.DeviceChange += $dev } $vm.ExtensionData.ReconfigVM_Task($spec) }
The CSV file should look like this
"vmName", "hard disk", "IOPSLimit".
'VM1', ' Hard disk 1 ","50"
'VM1', ' Hard disk 2 ","75"'VM2', ' Hard disk 1 ","75"
'Computer', ' Hard disk 1 ", 3 '35"
'Computer', ' Hard disk 2 ", 3 '55.'Computer', ' disk hard 3 ", 3"65"
-
Hi all
I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.
The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.
Any help?
It became quite a headache for me. Thank you guys
Hello
Thanks for posting your query in Microsoft Community.
I understand that you have problems with the installation of Windows Update.
If you your computer are connected to a domain network?
If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.
T echNet Forums for Windows 7
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworkingHope this information helps.
-
How to use PowerCLI to change the connection of network of 60 virtual machines
Hello
I have several virtual machines of XenDesktop with similar names and currently the same network, but I want to be on a different network. Here are the details:
For my virtual machines, appointed XD-W7-01 by XD-W7-60, on 1 network adapter, they are all currently on 'Network VDI of Xen Production' for their connection network. I want that they all be changed to 'network of VDI Xen Test '. can you give me the script to make an and I can certainly understand the rest. Thank you very much in advance.
Hello, MarchTheMonth-
Welcome to the communities.
You can do this quite easily by using the cmdlet Set-NetworkAdapter , as:
## for one VMGet-VM XD-W7-01 | Get-NetworkAdapter -Name "Network adapter 1" | Set-NetworkAdapter -NetworkName "Xen Test VDI Network" -WhatIf
(remove the '-WhatIf "do actually change). So, for all the machines of sixty, it would be something like:
## for all of 1-60Get-VM (1..60 | %{"XD-W7-{0:d2}" -f $_}) | Get-NetworkAdapter -Name "Network adapter 1" | Set-NetworkAdapter -NetworkName "Xen Test VDI Network" -WhatIf
Yet once you take off the coast of the - WhatIf to change. What to do for you?
-
Using SQL to display the date range
Gurus,
I have a sql statement such as
My output looks likeselect MIN(HIREDATE), MAX(HIREDATE) FROM EMP WHERE DEPTNO = 30
Based on the values of MIN (HIREDATE), MAX (HIREDATE) valuesMIN(HIREDATE) MAX(HIREDATE) 12/30/1998 12/30/2001
I need a SQL to generate the output as
30/12/1998
30/01/1999
28/02/1999
---
---
until the Max value (HIREDATE)
In February, we have 30 days, in this case to the last day of the month.
Thanks for the great help
C 007Hello
put my post to correct and others with useful, please
Is salim.
-
Need help to report on the configurations of the virtual machine using PowerCLI
Hi guys,.
I try to shoot down vCenter virtual computer configuration details and am not having much luck with vCPU multicore machines.
Looking at the lists of VMS in vSphere Client, it offers a column "Number of CPU" basis and does not include any other granularity (i.e. in terms of casings & carrots as opposed to simply 'CPU Count').
I thought that maybe I have better luck using PowerCLI and essentially, the cmdlet "Get - VM" has the kind of information I'm looking for, but I find that it lacks a bit when it comes to vCPU details. Essentially, it turns out that does not do much better than the list of virtual machines in vSphere Client because it produces only a "CPU Num" value, which is not particularly useful.
For example, if "processors Num" 4, that '4' means? This could mean one of the following:
- 1 x 4 drivers
- Core 2 x 2
- Basic 4 x 1
I hope someone out there can help produce me a list of virtual machines with details of configuration that includes both sockets & carrots for vCPU?
Thanks in advance!
Try like this
Get-VM | Select Name, @{N="CPU";E={$_.ExtensionData.Config.hardware.numCPU/$_.ExtensionData.Config.hardware.numCoresPerSocket}}, @{N="Core per CPU";E={$_.ExtensionData.Config.hardware.numCoresPerSocket}}
- 1 x 4 drivers
-
5.7 LR on a MacBookPro w retina using can't display the grid to open the imported photos I revised and improved. Can you tell me how to open it in the grid view? I tried it in the drop-down list so that clicking on the icon in the grid view, does not. Have been using LR for two years and this has never happened before.
The grid view is not available or is the size of the thumbnails view set grid too large so only fits on the screen?
-
Send the folder displays "Sent (1)" and displays in bold
One of the Email accounts displays the folder "sent" in this State. I am able to send and receive email with the account. Does anyone know why it happened or how to fix it? This is a very heavily used e-mail account.
but y at - it a mail unread in the folder? Say with IMAP accounts, that it is possible to get a sent mail unread, or other downloaded from your phone device
Maybe you are looking for
-
RAM for Satellite Pro L10-103 PSL15E
Hello I'm looking for a few product details so I can pass this laptop RAM: 256 MB origin, although I'm having a hard time locating information online. I was wondering what the max size and type I should get. Any information is appreciated. Thank you.
-
What happens when two computers call the same code stored in networked storage?
We have our code on the network storage and have worked on a single computer code. We have now replicated our configuration and want to use the same code to run the new installation to another computer. We want to run simultaneously both configurat
-
Someone at - it a printer driver for the printer Z25 lexmark for windows vista?
-
Access the static variable...
Hello I need a static variable which holds a QMap, for this example I'll use QMap. I created fresh new project and I changed in applicationui.cpp: ...ApplicationUI::ApplicationUI(bb::cascades::Application *app) : QObject(app) { .... initDatabase( 1 )
-
With the help of web central authentication 802. 1 x on a 3560 at ISE. I get on the web portal very well and was able to connect with the guest account and change the password. Now when I get redirected to the portal each time I login I get "your s