Using random image loader, please

Similar Questions

• Please help (Urgent), canvas of HTML5 of Random images (no repeat frames) for Adobe animate CC

  I have a very strange problem, I'm a designer, little programming, who now works in HTML5 canvas project.

  I applied the code

  this.btn.addEventListener ("click", fl_MouseClickHandler.bind (this));

  function fl_MouseClickHandler()

  {

  this.gotoAndPlay (Math.round (Math.random () * 5));

  this.gotoAndStop ();

  }

  This code works Random images.

  but my problem is some time by repeating frames occurs.

  Please check my sample

  http://dsrengineering.com/test/Random2.html

  Download File Source (Animate CC)

  http://dsrengineering.com/test/Random2.fla

  If you want to play each image once, randomly selected you can use:

  frameA var = [];

  var index = 0;

  for (var i = 0; i)<>

  frameA.push (i);

  }

  Shuffle (frameA);

  This.BTN... etc

  function fl_MouseClickHandler() {}

  this.gotoAndStop (frameA [index]);

  index ++;

  {if(index>=This.totalFrames)}

  do something. for example, redesign frameA, or not.

  }

  }

  function shuffle (a) {}

  var p;

  var t;

  Ivar var;

  for (ivar =. Length-1; Ivar > = 0; Ivar-) {}

  p = Math.Floor ((Ivar+1) * Math.Random ());

  t = a [ivar];

  a [ivar] = a [p];

  a [p] = t;

  }

  }

• Frames random load - Please Help!

  I need assistance with Actionscript 3.0. I want to have my flash file to jump to a random image number in my table. But when I test the movie, I have 12 error messages. Here is the code that I have on the first image:
  
  var frameStarters:Array = new Array (2,22,42)
  var fs:Number = Math.round ((Math.random () * (frameStarters.length - 1)));
  gotoAndStop (frameStarters [fs]);
  Stop();
  
  Help, please!

  Fixed. Thanks kglad!

  What happened was that I didn't have a preloader. So whenever he was going randomly to an image in my table, it would run out of time before the third image in my table. Thus, the above code works for "Random frames loading", but you also need a preloader on frame 1.

• I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  I am currently using Adobe Acrobat Pro and cannot use thumbnail images in some of my PDF files. I have not upgraded and have always the possibility to use with certain PDF files, but not all. Help, please!

  Version: Adobe Acrobat 9 Pro

  Windows

  I found the solution:

  In the PDF file, click View > Navigation panel > Pages

  I had to reset panels to view the Pages again.

  Thank you!

  Heather Solis | Operations associate | Crown AFAM Capital, Inc.

  [personal information deleted by Moderator]

• Loader + Math.Random: why is NombrAl not load random images

  Why this code does NOT load a random image, despite the random number of tracing?

  package {}

  import flash.display.Loader;

  import flash.display.Sprite;

  import flash.events. *;

  import flash.net.URLRequest;

  import flash.display.MovieClip;

  SerializableAttribute public class LoaderExampleTwo extends Sprite {}

  public var randomNumber:Number = new Number();

  private var url: String = "D:/flash cs5.5/flash_help_examples/images/"+randomNumber+".jpg";

  public void LoaderExampleTwo() {}

  NombrAl = Math.ceil (Math.random () * 2);

  trace (randomNumber);

  var loader: Loader = new Loader();

  configureListeners (loader.contentLoaderInfo);

  loader.addEventListener (MouseEvent.CLICK, clickHandler);

  var request: URLRequest = new URLRequest (url);

  Loader.Load (request);

  addChild (loader);

  }

  private void configureListeners(dispatcher:IEventDispatcher):void {}

  dispatcher.addEventListener (Event.COMPLETE, completeHandler);

  dispatcher.addEventListener (HTTPStatusEvent.HTTP_STATUS, httpStatusHandler);

  dispatcher.addEventListener (Event.INIT, initHandler);

  dispatcher.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  dispatcher.addEventListener (Event.OPEN, openHandler);

  dispatcher.addEventListener (ProgressEvent.PROGRESS, progressHandler);

  dispatcher.addEventListener (Event.UNLOAD, unLoadHandler);

  }

  private void completeHandler(event:Event):void {}

  trace ("completeHandler:" + event);

  }

  private void httpStatusHandler(event:HTTPStatusEvent):void {}

  trace ("httpStatusHandler:" + event);

  }

  private void initHandler(event:Event):void {}

  trace ("initHandler:" + event);

  }

  private void ioErrorHandler(event:IOErrorEvent):void {}

  trace ("ioErrorHandler:" + event);

  }

  private void openHandler(event:Event):void {}

  trace ("openHandler:" + event);

  }

  private void progressHandler(event:ProgressEvent):void {}

  trace ("progressHandler: bytesLoaded =" + event.bytesLoaded + "bytesTotal =" + event.bytesTotal);

  }

  private void unLoadHandler(event:Event):void {}

  trace ("unLoadHandler:" + event);

  }

  private void clickHandler(event:MouseEvent):void {}

  trace ("clickHandler:" + event);

  var loader: Loader = Loader (event.target);

  Loader.Unload ();

  }

  }

  }

  Try:

  package {}

  import flash.display.Loader;

  import flash.display.Sprite;

  import flash.events. *;

  import flash.net.URLRequest;

  import flash.display.MovieClip;

  SerializableAttribute public class LoaderExampleTwo extends Sprite {}

  public var randomNumber:Number = new Number();

  private var url: String

  public void LoaderExampleTwo() {}

  NombrAl = Math.ceil (Math.random () * 2);

  trace (randomNumber);

  URL = "D:/flash cs5.5/flash_help_examples/images/"+randomNumber+".jpg";

  var loader: Loader = new Loader();

  configureListeners (loader.contentLoaderInfo);

  loader.addEventListener (MouseEvent.CLICK, clickHandler);

  var request: URLRequest = new URLRequest (url);

  Loader.Load (request);

  addChild (loader);

  }

  private void configureListeners(dispatcher:IEventDispatcher):void {}

  dispatcher.addEventListener (Event.COMPLETE, completeHandler);

  dispatcher.addEventListener (HTTPStatusEvent.HTTP_STATUS, httpStatusHandler);

  dispatcher.addEventListener (Event.INIT, initHandler);

  dispatcher.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  dispatcher.addEventListener (Event.OPEN, openHandler);

  dispatcher.addEventListener (ProgressEvent.PROGRESS, progressHandler);

  dispatcher.addEventListener (Event.UNLOAD, unLoadHandler);

  }

  private void completeHandler(event:Event):void {}

  trace ("completeHandler:" + event);

  }

  private void httpStatusHandler(event:HTTPStatusEvent):void {}

  trace ("httpStatusHandler:" + event);

  }

  private void initHandler(event:Event):void {}

  trace ("initHandler:" + event);

  }

  private void ioErrorHandler(event:IOErrorEvent):void {}

  trace ("ioErrorHandler:" + event);

  }

  private void openHandler(event:Event):void {}

  trace ("openHandler:" + event);

  }

  private void progressHandler(event:ProgressEvent):void {}

  trace ("progressHandler: bytesLoaded =" + event.bytesLoaded + "bytesTotal =" + event.bytesTotal);

  }

  private void unLoadHandler(event:Event):void {}

  trace ("unLoadHandler:" + event);

  }

  private void clickHandler(event:MouseEvent):void {}

  trace ("clickHandler:" + event);

  var loader: Loader = Loader (event.target);

  Loader.Unload ();

  }

  }

  }

• only a few images load up to

  Hi - I'm having a problem with images not loading with lightroom 6. Only a few seem to them nor do. I'm running off lightroom 6.0. It may be I need to upgrade to the latest version, but I can't see how I can do that nothing is obvious!

  Help, please!

  adrianf75993787 wrote:

  I opened an old case of LR that has been updated for LR6 and only a few images load upward. There is no error message it is as it is normall is when you have to wait a few seconds for the images appear, but with this rare appear and most remained empty. I tried attached a screenshot, but I do not see how to attach to this message!

  You can attach the screenshot using the icon insert a picture (in a browser web, you cannot attach a screenshot by e-mail)

  

• Adobe Creative SDK - guide "to using the Image Editing Component" does not open

  Hello everyone, I'm trying to open Adobe Creative SDK for Android, but it does not (tried it on several browsers). When I press on "to using the Image Editing Component", it is loading and loading, nothing happens. Can you help me? I'm new here, maybe I need to do something first? I just need this component for Android, nothing else, but I don't know how to install it without a guide.

  .

  Please post your query on: Adobe Creative SDK

• Dynamic image loading problem

  Hi friends,
  
  I have a problem loading dynamic images. I used JLabel to load the image in label.setIcon get (new method ImageIcon("image.jpg"). But when I make changes to the image and save it with the same name ("image.jpg") it will show any changes of the image showing in get but the image is changed to the location of basic computer. When we restart the application, it displays the modified image.
  
  If you understand my problem, please guide me to show the image changed without restarting the application.

  835214 wrote:
  If you understand my problem, please guide me to show the image changed without restarting the application.

  You could query the image file every 5-10 seconds to see if it has been modified, then reload If Yes.

• The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk

  I am havin problems with my computer, when I start my computer or open a page or try to download anything it comes so far... The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk... I have a lot of problems in trying to solve how to fix this, as I don't know that much about computers. and I don't have the installation disc, I use windows xp I would be great if someone could help me please thank you. Kayleigh lindsay

  It also suggests that you can not run a software antivirus... If this is something you need to heal very quickly.  However, installing an antivirus application - if your PC is already infected - is usually ineffective.

  I suggest you do the following-
  (1) download and run a full scan using the Scanner for Ms.  Available here: http://www.microsoft.com/security/scanner/en-us/default.aspx
  It does not install, is therefore more difficult for malware to block.
  (2) if that was clean, then get an anti-virus in real-time as soon as POSSIBLE.  There are many good choices (Norton, McAfee, etc.) which costs money, and several good without applications, including MS Security Essentials available here: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Note!  If you have another antivirus installed, do not add MSE.  Run two at once is precarious - they will conflict with each other.
  Also, make sure that your windows firewall is turned on, or you have another 3rd party firewall installed.

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Error "the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. "Please check this against your installation diskette."

  Original title: lockout

  I get a black screen with the message from the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. Please check this against your installation diskette.

  Hey Todd-Cindy-MorganBurris,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. You are able to boot into Windows after the error message?

  Method 1

  If you are unable to boot into Windows then check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If you can boot into safe mode and clean boot procedure don't help then I would suggest that scan you SFC on the computer that will search the corrupted system files and check if that helps.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• The Application or DLL C;\program~1\Google\Google~1\Google62~1.DLL is not a valid Windows image. Please check this against your installation diskette.

  Original title: Please help

  The Application or DLL C;\program~1\Google\Google~1\Google62~1.DLL is not a valid Windows image. Please check this against your installation diskette.   I get this message all the time that I can still use my computer, but it is very annoying, I'd be very grateful for the help!

  Scan your computer with Malwarebytes. Get rid of AVG and get the free version of Avast (free if you can afford it). Get rid of Iobit. It doesn't help. Get rid of the advanced system of care. It will do more harm than good.

• I get an error message "an internal error occurred in the initialization stage. The application cannot be loaded, please contact application, Error 502 "seller

  Original title: Error 502

  How to fix "an internal error occurred in the initialization stage. The application cannot be loaded, please, seller contact application, Error 502 "after installing Yahoo Messenger

  Hello

  1. Once you get this error?

  2 are connected to any computer in the domain?

  3. have you made changes on the computer before this problem?

  I suggest you try to uninstall and reinstall Yahoo Messenger and check if it helps.

  Uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program

  If uninstalling and reinstalling Yahoo Messenger did not help, then it would be better to post the same question in community Yahoo for assistance.

  Community of Yahoo: http://help.yahoo.com/l/us/yahoo/helpcentral/community_index.html

  Hope the information is useful.

• Images on the screen in the list update only after scrolling to the rank of the list instead of updating automatically after each image is uploaded (delayed image loading)

  1. I started a lazy image loader to download images in drawListRow and passed the url of the image to download reference.

  2. After downloading the respective bitmap in the lazy image loader, I cancelled the list (called by using a reference to the screen where images are to shoot) using a thread event as follows:

      UiApplication.getUiApplication().invokeLater(new Runnable() {
              public void run() {
                  _list.invalidate();
              }
          });
  

  But my images are updated on the screen until I scroll over the line in the list.  I also tried to use _list.invalidate (index) to invalidate each line once the image is drawn to this particular line, but it does work and does the same thing as _list.invalidate ().

  I want the images to be updated without scrolling, and as soon as they are downloaded. How do I get there?

  Valuable contributions will be highly appreciated.

  UiApplication.getUiApplication () .invokeLater (new Runnable() {public void run() {_list.invalidate ();})            }        });

  use invokeAndWait instead of invokeLater and check if it works or not?

• You use an image for multiple clients

  Hello

  After a lot of research because my brain would allow, I discovered that I can't let ONE client to use a single image and that if I wanted to do several customers use this same image I have to redownload the image (the license) or a licence.

  My question is: If I had to get a license on an image how many of my clients would be able to use this image even on their Web site? And all the images offer an extended license?

  Thank you in advance for your help!

  Matthew

  Hi Matthew

  Please check that the conditions of licence concerning the customer use - section 3.5 here - http://www.adobe.com/content/dam/acom/en/legal/servicetou/Adobe_Stock_Terms-en_US_20160616 .pdf

  http://www.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe_Stock_Terms-en_US_20160616 .pdf

  An extended license, you cannot use the image for the benefit of several clients.  You will need to license for each customer that you want to use the image for the image.

  Information on the extended licenses are also provided in the terms of the license.

  Kind regards

  Bev