FontBook preview-> see the gray police

Similar Questions

• El Capitan does not start after a freeze and a forced, bonded stop on the gray screen

  Hi all

  I have a MacBook Pro 17 "late 2011, 2.4 Ghz, 16 GB RAM with OS X El Capitan installed, the latest version with all the updates." A year ago, I've had my Toshiba HDD replaced by Samsung SSD 250 GB SATA III 850 EVO and the Toshiba disk has been moved to CD using LMP disk Doubler Bay, at the same time, I had my RAM went from 8 GB to 16 GB of RAM, I have now. The OS X El Capitan is installed on the SSD. In this configuration, everything worked well, with absolutely no problem whatsoever. Sometimes, I ran disk utility to check both of my hard drives and no problem.

  Unfortunately yesterday, strange things started going. First of all, I noticed some unusual glitches when you browse the internet with Safari. I'll try to describe the best I can because they lasted about 2 seconds, so I don't recall. In any case, all of a sudden, as if half right of my screen has shifted in the middle of the screen and it was wrong and image around was all damaged or distorted but legible. He'll be back to normal when I switched between applications or revealed the office displays the windows of all running applications.

  It was similar to this (below) but much larger.

  

  Then, I continued my work as if nothing had happened, when all of a sudden my mouse pointer disappeared and the system froze completely. It was just totally frozen, the time was not moving and the computer did not react somehow to the keys I pressed. Unable to do anything, I had to press and hold the power button to turn off the computer. After starting it again once I hear the ringtone, I see the gray Apple logo and the loading bar. When the loading bar reaches about 40%, a coloured horizontal line appears (see photo below), then it subsides quickly followed by a black screen, which is quickly followed by a blank grey screen with no Apple logo or the bar loading, just a gray screen Uni, where I'm stuck. The computer turns off by itself after about 15-30 minutes if I leave it like that on the gray black screen.

  The coloured horizontal line:

  http://i.imgur.com/9rzEyc4.jpg

  I can't start in safe mode or recovery mode.

  I CAN only boot single user mode, Apple Hardware Test mode, the boot (by holding the ALT/OPTION key) Manager and verbose mode. Also, I can start on the Internet recovery mode but once the download is complete, it is stuck on the gray screen (gray screen with the Apple logo WITHOUT horizontal line-online quick clear-online stuck on the gray screen black screen)

  After a lot of googling and reading, that's what I've tried so far:

  -' fsck - fy " in single-user mode

  -running Apple Hardware Test and the Apple Hardware Test extended, both are zero problem

  -Reset PRAM and NVRAM, MSC, several times

  -with the help of this guide: https://www.afp548.com/2015/01/14/when-yosemite-has-fallen-and-it-cant-get-up/ in single-user mode: "rm - rf / Volumes/Macintosh\ HD/private/var/db/BootCache * '

  "rm - rf/Volumes/Macintosh\ HD/Library/Caches/com.apple*"

  "defaults write DSBindTimeout HD/Library/Preferences/com.apple.loginwindow.plist Volumes/Macintosh\ - int 10.

  
  

  -in single-user mode: empty the trash

  -in single-user mode: "sudo purge"

  
  

  -in a single user mode: 'exit' or 'reboot'

  
  

  
  

  However, during my fight, I could successfully arrives at the login screen, log in and use my MacBook for some time, about a half hour before the same thing happens, the mouse disappears and the system to freeze completely. I remember that both times where I was able to get to the login screen, it was after I had been in single user mode and typed 'Quit' or 'reboot'.

  The above colorful horizontal line also appears in the single-user mode when I type "exit" AND I am UNABLE to get to the login screen later (photo below). It just goes to the gray white screen. Those two times when I was able to connect to exit single-user mode, the horizontal line colored is NOT appear in single-user mode.

  The horizontal line colored when you exit single-user mode:

  http://i.imgur.com/0tOVEO6.jpg

  
  

  
  

  Here's what I see in Verbose mode:

  http://imgur.com/LJIRyo

  http://imgur.com/4HF4hvJ

  http://imgur.com/uMdHY5Z

  http://imgur.com/WSswHKK

  MacBook Pro repair for graphics issues outreach program

• Why can not see the pictures after I imported them to work on them?

  PC with W7, it started with L3.4, I can import, see the gray boxes, see the file name and the data when I smile, I can't go to develop and see boxes, but not images. Worked fine, then stopped. Works fine on my laptop. I just upgraded to L5 in an effort to get back on track by using the software. Same question. Could be something simple, but very frustrated and feel like I lost the upgrade, now since this is still the case. Help - please.

  I think that you have a damaged screen profile

  http://members.lightroomqueen.com/index.php?/Knowledgebase/article/view/1137/188/how-do-i-change-my-monitor-profile-to-check-whether-its-corrupted

• Windows taskbar: see the previews windows is grayed out. (thumbnails)

  the previews of windows see the (thumbnails are greyed out) I have windows vista and use the default theme of windows vista.  How can I get this feature enabled?  Thanks for your help.

  Hello

  (First of all make sure that you have one) an Aero theme in personalization dialog dialog box and b) the themes service is running in the services (click Start, type services.msc and hit . Locate the themes service and click on it and then start/restart option in the left column).

  If they both work, see additional patches here: http://www.vistax64.com/tutorials/118399-thumbnail-previews-taskbar-enable-disable.html

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?

  When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?

  Mijail,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

  Of course, this also affects other things so there can be a downside to it, of course, the influences of transparency reduced the appearance of other things, but so far nobody complained disadvantages.

• Can not see the previews after the import of CR2 files

  Hello

  This problem happened all of a sudden...

  When I import NEF for Nikon or canon raw cr2 files, I don't see the previews.

  The progress bar gets stuck on building smart surveys and I see a greyed out box.  When I choose an area spotted Gray and go into develop and then the preview is displayed and I can change the image.

  Can anyone help please?

  Thank you.

  SOLVED

  Called Adobe.

  delete all files from lightroom on laptop and start over.  works.

  Thousands...

  Removed from all catalogs began to sam problem.

  This is my last post:

  (1) a lroom 3

  (2) improved to 5.3 Ltroom

  (3) had problems all of a sudden as above

  (4) when I ran 3 Ltroom with the SAME files by importing them from scratch in ltroom 3, no problem.

  (5) uninstaled lgroom 5, reinstalled

  (6) upgraded to 5.3

  (7) the SAME problem.

  Help!

  Was it useful? Yes

• FAQ (29): why the "See the last SoftPaqs" button grayed out?

  When I'm in the mode 'All products' or "Building Driver Pack", "Show the last SoftPaqs" button is gray. How to enable this feature for SDM will show me the latest versions of the SoftPaqs for my selected models?

  

  In the modes of 'Building Driver Pack' and 'All products', you have the ability to check more than one model. Unfortunately, showing the latest version of a SoftPaq for more than one model is problematic because the same version of a SoftPaq maybe not the one which is responsible for all the models selected that makes the application unnecessary and ambiguous.

  Just think about it for a second. If we had a model (let's call ModelA) 5 years ago and another model who is only 1 year old (let's call ModelB) selected in SDM. Keep in mind that computer models of different years will probably have material differences that require different hardware drivers. Also note that this could be the case even if the models were of the same year. Furthermore, models most recent software qualification only goes back a number of years. It could very well be that the software can run on older models, but if HP do not qualify and test it, HP will not associate the new version of the SoftPaqs with older models.

  So, what does the request: "Show me the latest versions of SoftPaq for some models ModelA and ModelB" really means? We asked this exact question to various people and two completely DIFFERENT responses are returned. The answer seems to be influenced by the different needs of the Organization to which the respondents belonged to.

  For some, the answer was: ' show me the most recent SoftPaq who qualified for BOTH models. This is known as a query "AND". This query would only show what are the common SoftPaqs between ModelA and ModelB, but would show NO SoftPaqs, who were qualified for only one and not the other.  With this query, most of models that are selected, the lower number of SoftPaqs appears.

  But for other respondents, the answer was ' show me the lastest Softpaq is qualififed for EITHER model; which is a query "GOLD". This query would show all the SoftPaqs associated with each model. But it is not clear if each SoftPaq was qualified for ModelA, ModelB or for both. This request seems to be too broad, because the models have been selected, more likely it is that a SoftPaq would appear even if she wasn't qualified for a model on the list only.

  So, to illustrate this, imagine the following scenarios...

  Scenario 1

  We have three SoftPaqs. SoftPaq1 qualified for the ModelA and ModelB, SoftPaq2 is ONLY responsible for ModelA and SoftPaq3 is ONLY responsible for ModelB. What SoftPaqs should appear as the "last SoftPaq ModelA and ModelB"?

  Answer:

  Query AND: SoftPaq1 because it is "the latest version of a SoftPaq who qualified for BOTH models.

  GOLDEN request: SoftPaq2 and SoftPaq3 because everyone is "the latest version of a SoftPaq for at least one model.

  Scenario 2

  What happens if the SoftPaq3 did not exist?

  Answer:

  Query ANDoftPaq1 because it is "the latest version of a SoftPaq who qualified for BOTH models.

  OR queryoftPaq1 and SoftPaq2 because everyone is "the latest version of a SoftPaq for at least one model.

  Scenario 3

  What happens if the SoftPaq1 did not exist?

  Answer:

  AND query: No. SoftPaq is qualified for BOTH models

  GOLDEN request: SoftPaq2 and SoftPaq3 because everyone is "the latest version of a SoftPaq for at least one model.

  Add more models and SoftPaqs and results gets confusing real fast. Therefore, to avoid confusion, it was decided that the "View the last SoftPaqs" button would be disabled if more than one model was chosen because it is the only case where "See the last SoftPaqs" is not ambiguous. Thus, the "View the last SoftPaqs" button is available, if only a model (and OS and language) are selected.

  If you have several patterns that you manage, and you want to use the button "See the last SoftPaqs", please enjoy SDM configurations and save a configuration for each model. For more information on SDM configurations, please see using SDM.

• When I scroll during discussions on discussion forums, I can see is more a preview of the text - just recently he started to arrive.

  Until recently, I could get a preview of the text in a message board thread by scrolling on the thread binding. Earlier, this feature has stopped working. Now when I run the wire, a small box appears under the cursor, but no text.

  Just a reminder:

  I see tooltips in the disboards link you gave with Fx 3.6.12 under XP.
  
  You don't see them with the same versions.
  
  Many people say that this problem can be caused by the Google toolbar.
  
  I don't have Google toolbar.
  
  You do.
  
  But if you disable the Google toolbar you still see the problem.

  I googled a bit and can't find any other because of this. Now, my suggestion is to uninstall the Google toolbar and see if the problem goes away. If that doesn't work try safe mode as described here:
  
  http://support.Mozilla.com/en-us/KB/basic+troubleshooting#Troubleshoot_extensions_and_themes

• 2 problems: cannot see the preview of the images in my files and can not see the name of my files in some of the views.

  Yesterday, 18:46

  Some time ago, when I went to my files using Windows Vista, I could already see the preview of the images in my folder. But now, all I see is either a glass with brushes (the MS Paint logo) for JPG images and a background painted with paint brushes on my BMP images. So, how to get back to see previews in my folder?

  I also have another problem: in a few other cases, I see that the name of the program or file when I have the view defined as tiles, details or list. But when I choose one of the views icon (or small icons, medium icons, large icons and Extra large icons) I don't see the name of the program or file.

  How can I solve these 2 problems?

  I think I can answer the first question. I'll check back for an answer to your 2nd question.

  RE: Can't see thumbnails (excerpts), only the icons

  Start button > in the search box, type Folders options > view tab > ONE- always check "show icons, never thumbnails" > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• How can Windows Vista - windows mail - I separate list of the messages in the preview pane. When I open windows mail I just want to see the list of messages.

  Hello:

  How can Windows Vista - windows mail - I separate list of the messages in the preview pane. When I open windows mail I just want to see the list of messages.

  now I'm seening messages and preview list in the same window w / a separator between list pane and preview of the message.

  Ty

  View | Layout and uncheck the preview pane. You can also set the preview pane button in the toolbar if you wish.

• Movie Maker will not see a preview of the video, but plays sound

  Hello

  I know this question has been answered before, but I tried the suggested solutions and it doesn't seem to work. I used the MicrosoftFixIt tool to find any bad codecs and none came. I clicked on one of the links to download an older version of NVIDIA, as suggested, but I'll be honest, I have no idea what I'm doing.

  All I want to do is to edit videos on Movie Maker, but I can't because I don't see what I'm doing. Even if I just put a picture, nothing is displayed in the Preview on the left area!

  When I export the video she plays very well because I have strung together some pictures and a few videos with a mp3 file on the top and everything I played correctly once it had been exported.

  I use my laptop which is a HP Pavilion dm4, my OS is Windows 7 Home Premium, and I tried to update Movie Maker on the Windows website.

  I need help. Thank you for your time, you're probably sick of answering these questions, but I searched your forums carefully and nothing has worked.

  I look forward to your reply.

  Thank you for your help but I tried to restore my device driver, but unfortunately I have not all previous versions to restore. I have also tried to lower my hardware acceleration, despite having allowed me to completed the first instructions little change 16 bits etc, I could not then lower acceleration because the laptop just wouldn't let me.

  Thank you for your quick response, but unfortunately, my laptop still stubbornly useless.

  =======================================
  Depending on your answer I do not know what else to think.
  Although you might find your computer mfg site for
  earlier video drivers.

  Maybe install a previous version of Movie Maker
  worth to try:

  There is a version of Vista Movie Maker 6.0 which will be
  run on perhaps Windows 7 or 8... You can use it to
  new projects until you find the fix for MM12.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker 6.0 on Windows installation 7 or 8
  http://movies.blainesville.com/2010/05/installing-Windows-Movie-Maker-60-on.html

• Can't see the evidence/preview mode develop

  I selects the picture in library mode, then click on develop, but the evidence/preview is just a blue screen. I can't see the photo in the browser window. What should I do? I selected view Magnifier and tried various other things without success. Thank you!

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Cannot see the preview of my photos taken with the Sony A7R II even after software update.

  Even after the the Lightroom update, I still don't see the preview of my photos taken with the Sony A7R II even after software update. Need help please.

  

  Hi Joas,

  Sony A7R II files are not supported in Lightroom 5.

  You need at least version 6.1.1 or CC2015.1.1 to access these files: supported by Adobe Camera Raw devices

  You can upgrade your program of Lightroom or Adobe DNG Converter allows you to convert raw files to DNG and import them into Lightroom.

  Kind regards

  Claes

• Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police? Thank you

  Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police?

  You can see on the screenshot below fonts with longer names are not displayed, I know you can see an excerpt from the police, but that slows down and me its not practical!

  Concerning

  

  Hi emiltsonev,

  We do not have an option to increase the size of this Panel. You can use the slider on the right to scroll.

  Thank you

  OM