Using the back button causes an infinite loop between the articles

Similar Questions

• jCarousel: no width/height defined for items. This causes an infinite loop. abandonment

  I get this pop up on some Internet sites.   What is this and how do I get rid of him?

  Hi janittenbach,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what web browser you use to access the Web sites?

  4. do you have any jQuery jCarousel plugin installed on the computer?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  I hope this helps!

  Halima S - Microsoft technical support.

• Events of shooting in the infinite loop

  Hello

  I have two date fields (start date and a due date) and a text field for the user to enter a duration between two dates.  I added listeners separate events for each component and the problem I have is when a field is updated, the event listener calculates the date for each other the way and when the value changes, the event listener fires and changes on the other date, which causes an infinite loop.

  I tried to remove event listeners on the other components at the beginning of the listeners and adding them to the end listeners, but the events still seem to fire when the listener is added.

  Is there an easy way to prevent that event managers in the course of execution when you replace a value component the event of another component listener?

  Try to call validateNow() on controls before Auditors

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Comparing information in a .csv file by using the worksheet reading

  I need to compare each line of a spreadsheet to input from the user. I can read the spreadsheet fine, but I can't compare a line at a time. I know I have to somehow compare each line using a loop, then BUT all the results, but I can't seem to understand.

  Attached, that's what I have so far.

  The cluster with John Smith has been used to test compare it.

  What is your purpose here?  You just want to know if you have a match?  Or you want to know what line?

  This last solution you have causes an infinite loop if you do not find a match.  Use a loop FOR.  Here's the code I would use.

  

• infinite loop of custom tags

  IM using a custom tag that just happens to have the same name as the page I use in it, but the page I use isn't in my way of custom tags, but it causes an infinite loop which returns the content of the page.
  
  the tag is called login.cfm and is used on a page of the same name in a different folder, if the connection fails, the tag cflocations to the login.cfm (the tag not login) and the success he cflocations to another page.
  
  I changed the tag to login_user and it works, but I wonder why she did this.

  Because when a custom tag is called the ColdFusion server will first search this model in the directory of the calling page and then in the path of the custom as defined in your administrator tag. This makes it possible to use custom tags and not them have defined within the administrator.

• Judgment of multiple while loop running at different rates to stop using the single Boolean stop button

  Hello

  I'm on the block diagram of 4 loops, do different tasks. They are independent of each other, but need to see the unique front panel - some of the wonders of labview!

  Now, I want to have a unique stop button which will in fact be a back button to return to the main screen by stopping all four loops on the block diagram. I used the stop button (switch released) with local variable to stop the three other loops. He stops the vi but it is not a good stop vi to stop properly and the grid on the performance of the front panel. Now all loops run also at different rates, so it is not necessary that all loops are stopped immediately when one of the loop is stopped. Can't really think of a better way. All the ideas!

  Kind regards

  Austin

  Variables local is ok in this case, but you will need to keep the control in switching mode (no lock).

  A better solution would be to have all the loops as a structure of event all listening value stop change. Or have the Stop value change event generate a user defined output event or similar.

  /Y

• C6180: To avoid damage, use the power button / shutdown - message does not disappear and the printer is looping

  I have problems with my printer since arriving to a new home. I stop the printer before removing the cable, but seems could have pulled the power cable earlier than closing down.

  Since that time, the printer is looping with message "to avoid damage to use the off button /...» "- How do I stop and work again.

  Please help!

  Thank you.

  Heck!

  I was really hoping that would not be the issue.

  So, if I understand it, the question you receive looks like this;

  "It lights up and shows the HP logo and process bar animation for one minute, followed by the message:"abnormal termination. "  To avoid damage use on the button to turn off the printer.  Do not use a wall or the band switch to close.  Press OK.  Then he stops and leaves upward. »

   

  Try this:

  1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.

  2 unplug the power cord also from the wall...

  3. wait for two minutes.

  4 reconnect the power cord to a wall outlet first.

  5. hold the pound (#) and six 6 buttons.

  6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.

  7. turn on the printer if it goes out...

  Third times the charm, right? * fingers crossed *

   

• Zoom after using the button 'back' on Android

  Hello

  On Firefox Android, I have one on a web page and zoom using double-tap or pinch and then click on a link on the page. Firefox to display the page. Everything is good.

  If I use then the back button to return to the previous page, Firefox will not display the page as it was previosly zoomed in. It forces me to zoom in by double-tap or pinch.

  Is a framework or an add-on that will preserve the zoomed in State after his return to the previous page by using the back button?

  Thanks in advance.

  I submitted a bug report, and they quickly asked me to try the latest Nightly build. This bug is fixed in the latest nightly build!

• How to use the "back" button to return to the new page tab in FF15

  In FF14 I could
  (1) open the new tab and see the new tabs with thumbnails of page 9 page.
  2) click on a thumbnail and go to this page.
  (3) click on the back of FF button, who took me to the new tab page so I could click on some other thumbnail.

  In FF15 which doesn't seem to work. In step 3 above, the previous button is not active/active and so I can easily go back to the new page tab. How to get back in a simple way?

  No, you can no longer use the previous button back to the topic: newtab page if you have opened a page by clicking on one of the slots on this page.
  
  You need to close the tab and open a new tab to get this page or set as the home page and click on the Home button.

• The back button often responds with a drop down menu of the story rather than simply go back to the previous page. There used to be a small arrow for that, why did you do that?

  The back button often responds with a drop down menu of the story rather than simply go back to the previous page. There used to be a small arrow for that, why did you do that?

  When I left click on the back instead of the browser navigation back button, I go almost every time to get the list of previous browsing history or it will just doing nothing until I click on the new button. The history of combination of button "return" rather than a separate between the historical click of the buttons box is the problem. Combined with my arthritic fingers of aging that is. If I was as fast as I used to be I guess it wouldn't be a problem. I liked the separate history area. This action combination navigation / buttons story scenario is problematic. I'm fairly certain that if I find it quite disturbing to bring to your attention that there are others (old beards) in the same boat I am.

  Thanks for listening
  D

  Use one of the following methods to open the tab history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

  What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

  If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

• Using the "back button" update for the LCD screen on the 60 d

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  pixeltaker wrote:

  I used this method all the time, but now when I push on the development of the "back" button, it snaps as it is to take a picture, but no image is recorded on the SD card. When I look through the viewfinder and use the button "return" of discussion, it works perfectly.  I would like to know how to get back to the old method of development on the LCD screen, with the emphasis of the "back" button.  My Canon is a 60 d

  You must go to the menu and move the quick mode to Live Mode.  In fast mode, when you press on the "back" button, the mirror flips down (click) and the camera tries to focus.  He has not yet made the photo.  To take a photo, you must listen to the AF confirm beep, then press the shutter button.  Quick mode is in fact the "snail", in my opinion .  Read more about this on page 160-168 of this manual.

  

• I tried to write a script, the user can use. This return number file *.tiff associations back using the image viewer is caused each month.

  Original title: automation of file tiff without elevated rights association

  I tried to write a script, the user can use. This return number file *.tiff associations back using the image viewer is caused each month.

  Hi, Unclemarcus2002,

  You would be wiser to post on the Forum TechNet where there is COMPUTER experts.

  http://social.technet.Microsoft.com/forums/en-us/newThread

  Maybe using the ASSOC and FTYPE command in a script will do what you want? I think that these orders would also apply the association throughout the world, rather than on a per-user basis.

  ASSOC: http:

  FTPYE: http:

  Here is an example, that you can try.

  Let's say you have a text file called "foo.bar" and you want the extension .bar always open with Notepad. There is an association for text files, so get him by typing "Ftype | more' at the command prompt (it will make a major announcement). Finally, you'll see the line "txtfile". On mine, it's "txtfile=%systemroot%\system32\notepad.exe %1" without the quotes.

  First create your association: assoc .bar = FooBarText

  Now to assign your request to your file type association: ftype FooBarText=%systemroot%\system32\notepad.exe %1

  You should now be able to double-click the foo.bar file and it will automatically open in Notepad.

  If you already have a Microsoft Office Document Imaging association, I think that it should be relatively simple type of substitution. Use ftype /? for a little more help.

  http://community.Spiceworks.com/topic/119639-Windows-7-automate-file-assocations

• Problem using the Safari browser's ' back' button

  Hi, when I use the back button of the browser Safari in a site, the page remains white (white) and I need to use Refresh to make it appear. Who would confuse some people to use the back button in a site. But it is only with Safari. Other browsers work fine. Does anyone have a similar problem? How did you solved it? Thank you.

  It is a known issue with Safari, (with no final solution) try to clear the cache and browser history.

  If you do a search for the problem there are a number of other suggestions to solve the problem, (little useful, isn't much).

  https://www.Google.co.uk/?client=Firefox-b-AB#q=Safari+back+button+goes+to+blank+page&GFE _ rd = cr

• Video playback HTML5 on Android, after the "back" button is used.

  Hi, I'm looking to create an app that plays the video online, using the HTML5 video tag. I have to support Android and have a problem on this platform. My app OK video online games when the application is first started, but if you exit through the back button and then restarted, the video will not play again. I have to "force stop" the app before it will work again. If I exit the application using the home button and restart, the video is very well and reproduce again OK. This behavior occurs if I'm playing a video hosted remotely or locally hosted video. The MP4 video format, I have tried all other formats at the moment. Can someone tell me what I am doing wrong? I guess that the needs of the "back" button a kind of reset or clear-up to the release of the app, but I can't find anything about it!

  I tried to catch and disabling the "back" button event, but that doesn't seem to work at all, maybe because I'm using the Ionic framework and do it in the wrong place. But in any case I don't really want turn off if I can help it.

  I have KeepRunning = false in my file config.xml.

  I am currently using PhoneGap Build, CLI 5.2.0, 4.1.1 Android on a Samsung tablet.

  My code (I am disabling the button full screen via CSS):

  <video id="vidStart" class="videoDisplay" controls="controls" webkit-playsinline>
                  <source src="http://www.w3schools.com/html/mov_bbb.mp4" type="video/mp4">
  
                  Your browser does not support the video tag.
  </video> 
  

  Thank you, Andrew

  Using plugins in your application? If this isn't the case, you can consider using the Plugin of crosswalk (https://www.npmjs.com/package/cordova-plugin-crosswalk-webview), in this way, that you're not having to deal with the glitches of web view frustrating that occur on different versions of Android.

  Also, when this problem occurs, you see anything on your machine (adb logcat) console?