Is no longer able to navigate using the Remote app
I'm suddenly is no longer able to navigate (left, right, up, down) on the Apple TV using the remote app. I also tried with the new application. I'm t able to select the current item and return to the previous menu using button "Menu".
given that it could also have been a problem with the display of my mother's phone, I scroll on different applications etc and it works fine. So it seems that it is an application (or Apple TV) problem.
any ideas? I use an Apple TV, I bought 3 years ago.
Thank you!
Make sure that the software on your TV is up-to-date. Perform a restart of settings or by unplugging the power cord for 30 seconds. Alternatively, you can perform a reset of settings.
Tags: Apple TV
Similar Questions
-
Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.
Yes, I'm doing exactly this with the same put in place.
If the problem persists the next relative to the following articles might help you.
-
original title: internet connectivity
My computer is no longer able to connect to the ' net. This ab took place two months ago. I still get updates from MS and Adobe, but will not connect to any Web site. I've tried wired and wireless. All my other computers are connected again and the router and the modem seems to work properly. This occurred after a windows update has been installed automatically while I was away and there was no restore points. Other connectivity issues, the system works properly and I am connected to my local network, not just the internet.
Hello
You can follow below link that can help you to solve your problem:
Reset Internet Explorer settings
http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings
-
Transformation nodes no longer appear when I use the online tool
Transformation nodes no longer appear when I use the online tool.
They used to show on the square shapes and ellipses and when I open old files with lines they always show on them too.
Tried to hide and display the bounding box and switch between the selection and direct (black and white cursor tools) but can't get it to show the normal 8 knots.
It shows only a knot at each end and when I select and drag the tool Selection normal (black slider) it is the same when I use the direct Selection (white slider) tool and is not right.
Someone at - he seen this before?
It is not possible.
But you can describe your workflow and how you would need commands selection to work.
Use this form for your requests for telephone communications:
-
Application is not able to connect using the Oracle SCAN chain
Dear Oracle gurus
We have 11g r2 11.2.0.3.0 2 cluster nodes
We have configured the scanning using scan-vip single using/etc/hosts file resolution
Our app to work correctly using the string of double local Vip (10g method)
Scan works very well in the database server when we check using sqlplus
Works very well in the database server Oracle SCAN
Sqlplus DB - 1 test bench / testbed@my-db-scan:1521 / orcl
When we use it below URL JDBC in Tomcat Version-6 then "doesn't allow not to connect even if there will connect a while but connectivity isn't stable when we reboot the tomcat"
Hibernate.Connection.URL=jdbc:Oracle:Thin:@My-DB-Scan:1521/ORCL
Application is not able to connect using the Oracle SCAN chain
[May 13, 2013 12:48:24] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
[May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
[May 13, 2013 12:48:24] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
[May 13, 2013 12:48:29] [ERROR] [0.0.0.0] - unknown [CONFIG MANAGER]: error during the Configuration Manager operation, reason: failed to open the connection
[May 13, 2013 12:48:29] [TRACE] [0.0.0.0] - unknown [CONFIG MANAGER] com.cmp.mysm.datamanager.DataManagerException: failed to open the connection
at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:45)
at com.cmp.mysm.blmanager.core.system.systemparameter.SystemParameterBLManager.getList (SystemParameterBLManager.java:71)
at com.cmp.mysm.web.core.system.cache.ConfigManager.init (ConfigManager.java:47)
at com.cmp.mysm.web.core.system.servlet.myServlet.init (myServlet.java:27)
at javax.servlet.GenericServlet.init(GenericServlet.java:212)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1206)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1026)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4421)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4734)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
at org.apache.catalina.core.StandardService.start(StandardService.java:525)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
at org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:414)
Caused by: org.hibernate.exception.GenericJDBCException: failed to open the connection
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:140)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:128)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:52)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:449)
at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:167)
at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1596)
at org.hibernate.loader.Loader.doQuery(Loader.java:717)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:270)
at org.hibernate.loader.Loader.doList(Loader.java:2294)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2172)
at org.hibernate.loader.Loader.list(Loader.java:2167)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:119)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1706)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:347)
at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:43)
... 21 more
Caused by: java.sql.SQLException: an attempt by a client to fund a connection has expired.
at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106)
at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:65)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:527)
at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128)
at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:78)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:446)
... more than 33
Caused by: com.mchange.v2.resourcepool.TimeoutException: a client has expired while waiting to acquire a resource of com.mchange.v2.resourcepool.BasicResourcePool@47503458--timeout to awaitAvailable()
at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1317)
at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557)
at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525)
... 36 more
May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
NEWS: Deployment descriptor configuration host - manager .xml
May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
NEWS: Deployment configuration descriptor manager.xml
May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
NEWS: Deployment of the directory docs web application
May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Examples of Directory deployment web application
May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploy the web application ROOT directory
May 13, 2013 org.apache.coyote.http11.Http11Protocol start 12:48:29 AM
INFO: From Coyote HTTP/1.1 on http-8080
May 13, 2013 12:48:30 AM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
May 13, 2013 12:48:30 hours departure from org.apache.jk.server.JkMain
INFO: Jk running ID = time 0 = 0/15 config = null
May 13, 2013 12:48:30 hours departure from org.apache.catalina.startup.Catalina
INFO: Starting the server in 16222 ms
Some time Tomcat to connect to the database*.
[May 13, 2013 10:02:29] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
[May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
[May 13, 2013 10:02:29] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
In data manager: 1
In data manager: 2
In data manager: 19
In data manager: 20
In data manager: 21
In data manager: 22
In data manager: 23
In data manager: 24
In data manager: 3
In data manager: 4
May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
NEWS: Deployment configuration descriptor manager.xml
May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
NEWS: Deployment descriptor configuration host - manager .xml
May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
NEWS: Deployment of the directory docs web application
May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Deploy the web application ROOT directory
May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
INFO: Examples of Directory deployment web application
10:02:30 org.apache.coyote.http11.Http11Protocol start may 13, 2013
INFO: From Coyote HTTP/1.1 on http-8080
May 13, 2013 10:02:30 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
Org.apache.jk.server.JkMain 10:02:30 starting May 13, 2013
INFO: Jk running ID = time 0 = 0/14 config = null
Org.apache.catalina.startup.Catalina 10:02:30 starting May 13, 2013
INFO: 6176 SP server startup
But even once, when we try to stop and start then same problem occurred that we are not able to connect to the database
Thanks in advanaceWe had solved the problem of our self
to disable the setting of listener_networkWe also increase the connection timeout on the demand side
-
Satellite P750 114 - how to start using the remote control
Hello
Does anyone know how to start to use the remote that came with my makeup P750 114.
When I press on simple volume keys + / doesn't seem to work.
I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.Hello
A remote control that is included with some models allows you to perofom certain functions.
Using the remote control, you can
-Navigate and control the media center window
-Check the video or live tv display
-Place the computer in and out of fashion "Eve".There is a button on the remote control.
It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
You will find options; do nothing, sleep, hibernate, shut down.Hope this helps
-
Remote assistance - unable to connect to the desktop computer using the remote connection
Hello
I'm currently running vista Professional 64 bits for portable and desktop computers.
Problem:
-I am not able to connect to the desktop computer by using the remote connection.Tried:
-Setup the remote asstance for the Username (account login) designated
-looked up the IP address
-entering the IP then username and password
Failed connection *.Little Question, too:
-I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Cannot use the Netflix app, error: b33.
Original title: netflix b33 error.
for the last week, I was not able to use the Netflix app. I get error b33 and nothing seems to work. any thoughts?
Hello world. I use a Gateway laptop with windows 8. When Windows 8.1 became available I started to have this problem with the same error that won't go away: B33 S-61. I've updated to Windows 8.1, who took my computer awhile, and I was appalled the next day when I got the same error.
What I found?
I think that there is something in the current Netflix app that could not be updated, uninstall the application, reinstall it and launch it I had connect and now it works again.
Hope this will be useful :)
Tony
-
Error step 7, creation of WebCenter, and schemas content using the remote control
Hi all
I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.
This is the content of install_setup.log
Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance
Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..
localhost.localdomain:1521:ORCL
Installation of patterns Begin spaces
Please enter the password(User:sys) of the database:
Processing of command line...
Timeout connecting to the database. Current timeout value is 30 seconds.
UCR-6090: jump main operation: validation step connection failure
And the rcu.log
14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...
14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...
14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.
14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))
14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.
14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.
at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)
at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)
at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)
at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)
at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)
2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure
2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure
Any suggestions?
Best regards!
Hello
(1) you see no error on the Setup screen? If Yes please download the screenshot?
(2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.
Also, can you please try the following and check the box.
Go to
the location / / rcu/config / Take backup for the file rcu.properties, and then change the below
JDBC_LOGIN_TIMEOUT = 30
TO
JDBC_LOGIN_TIMEOUT = 300
and try again.
Concerning
Françoise
-
ESXi 4.0 - trying to suspend a virtual machine with the script using the remote CLI
Sorry if this is in the wrong forum; I can't find the specific forum ESXi 4.0.
This is the script I tried to use to get my VM to suspend in ESXi 4.0 remotely using the remote CLI:
"vmware - cmd.pl" - Server 192.168.5.6 - xxxx - xxxx password username "/ vmfs/volumes/datastore1/Helix/Helix.vmx" suspend soft
This error message appears after you have clicked on enter:
SOAP fault:
-
Error string: error. RestrictedVersion.summary
Lack of details: RestrictedVersionFault
Cannot perform the operation.
SOAP fault:
-
Error string: error. RestrictedVersion.summary
Lack of details: RestrictedVersionFault
I just need to be able to suspend my VMs on ESXi 4.0 box remotely. Any suggestions on how to get this to work? I'm open to other ways...
Take a look at this article for your answer: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
How many cell data uses the health app?
We have little data plans, and my wife intends to use the health app every day. Should I use to run the cell data health application? Another reference... If I used the maps on the watch application would use this as much data as it normally does on my iPhone? Just try to get an idea of the amount of data from the watch uses. Thank you.
I have not observed the health app using cellular data at all.
Regarding the cards on the watch, it's just an extension of maps on your phone. Cards cannot run independently on the watch. If you use maps on the watch, he uses exactly this use from your phone from your phone is running the show.
-
SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit
Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.
Thanks for the link.
It will be fine if some owner of Satellite X 200 can confirm.
-
Satellite A100 (PSAARA) - I can not use the remote control
I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?
Thank you!
If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
If this does not help please let us know. -
Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared
Satellite P100-PSPA3A-05S00P.
Do not know if I have deleted the drivers or need drivers for remote control and infrared.
I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.I used the remote when I bought the laptop from 1st but it was a few years ago...
Hello
I think that infrared doesn t need to be activated. It s must already be enabled.
But the remote control can be used within Windows Media Center.
I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well. -
My ipad pro will not change to the horizontal when I use the Pixlr app. It works in other applications. I already have the power off screen lock in the settings.
Contact support Pixlr from the link on this page > https://itunes.apple.com/us/app/pixlr-photo-editor-for-collages/id526783584?mt=8
Maybe you are looking for
-
I just downloaded Firefox and has been careful to choose a password that I can remember. I checked the account using my Outlook email. However, when I tried to browse the other themes following the link on the Firefox Customize page should I connect
-
I am trying to copy and paste text on a Web site, but Firefox seems to have a problem with that and then takes me to a page where I have to add a txt file and configure permissions for Web sites or something. Please provide a simple solution to this,
-
Impossible to update of the BIOS in Satellite A300-1ID (PSAGCE) 0 error message displayed
Hello! Last weekend, I bought my laptop and I can't seem to do the update of the BIOS (from 1.30 to 1.40). I use Vista 32 Home Premium SP1 (which came preinstalled in the phone) and after downloading, unpacking and running the file provided by the TO
-
I just purchased a Qosmio F40-ST4101, and by default, I choose an option of a hard drive, because I do not have a help I want to install. Can someone show me where is it fits in or it is not possible to add a hard drive for only if ordered with the c
-
There are a lot of things going on in my computer right now, worries me to death, one is called an adware: win32/open candy I guess than the virus. And it is a small thing, but still worry thaat essentials of microsoft has removed only one of them. I