using the cfg recorded vi analyzer for another project file

Similar Questions

• How can I install Adobe Acrobat DC Windows XP? Can I download and install Adobe Acrobat XI Pro and then use the serial number of DC for the record?

  How can I install Adobe Acrobat DC Windows XP? Can I download and install Adobe Acrobat XI Pro and then use the serial number of DC for the record?

  Hi ckc60777449,

  We're sorry, but the serial number would work only for Acrobat DC and not acrobat XI.

  You will need to upgrade your operating system to windows 7 to install acrobat DC.

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Box "Always use the selected program to open this kind of file" is grayed out out__cant change file association for any type of file

  I'm not allowed to change any combination of files for any type of file... If I try to associate a file type with a program that I can't the box is grayed out to always open the file with this program, for example, if I try to open .py (programming in python language file) with python from another program whenever I have to right click and open with python, but if I want to choose the "always use". the selected program to open this type of file"is grayed on I can not change it... pls help

  Hi VikkHckrz,

  1. you remember to make changes to the computer recently?

  Method 1:

  You can consult the following KB article and run the fix it tool available and check if you can assign file association.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Also check out the link:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  After running the fixit so check the option is grayed out or not.

  Method 2:

  If you're still having problems, then you can try to change the settings in the registry only if it is present on your computer and check if it helps.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer

  (c) in the right side of the screen, double click on "NoFileAssociate".

  d. change the value of "NoFileAssociate" from 1 to 0.

  e. exit the registry editor and restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  Hi drdrum,

  Greetings!

  Update the software of camera raw as Canon 5DSR is supported camera raw version 9.0 and above.

  Here is the download link: https://helpx.adobe.com/x-productkb/multi/update-error-u43m1d204.html

  Also, here is the list that displays the camera with respective camera raw support:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Concerning

  Jitendra

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• I pay 9.99 usd per month for the Plan of creative photography Cloud.  I use mainly LR... can I download / use the most powerful Photo Store for this award of contract also?

  I pay 9.99 usd per month for the Plan of creative photography Cloud.  I use mainly LR... can I download / use the most powerful Photo Store for this award of contract also?

  Ask for help here.

  Yes, creative photography plan cloud includes photoshop & Lightroom.

  Concerning

  Baudier

• How to use the find method to search for character format substitutions and FMP?

  I strongly suspect that I should be able to use the find method to search for paragraph substitutions and format as these options are available in the Find dialog box. However, because of the excruciating Extendscript documentation from Adobe, I not was able to find the key pieces of information that I need. I found these constants:

  • Constants.FV_FindPgfFormatOverride
  • Constants.FV_FindCharacterFormatOverride

  But he has literally no information about them. It is not yet a definition, so I'm actually just a guess. However, I think that I need to somehow use these constant within the parameters of the Find method. Any ideas on how to do it?

  You're right, there are still some bugs to work out of the documentation, although it has already improved since I started w / Extendscript last summer.

  Find two constants must be defined as the ival for a PropVal FindObject, for example:

  var myDoc is app. ActiveDoc;

  var docStart = myDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  tloc var = new TextLoc(docStart,0);

  var findParams = AllocatePropVals (1);

  findParams [0].propIdent.num = Constants.FS_FindObject;

  findParams [0].propVal.valType = Constants.FT_Integer;

  findParams [0].propVal.ival = Constants.FV_FindCharacterFormatOverride;

  myDoc.Find (tloc, findParams);

  Depending on what you're trying to accomplish, you can also take a look at the property FormatOverride of the Doc, bmp and item objects.

• Windows will not honor "always use the selected program to open this type of file."

  When I try to open a file *.img using 'open with... '. "I get a window of"Leader Type Helper"asking what software I want to use.  I have check "open this file using a software program (sic) that (sic) is already installed."  This very unnecessarily opens another dialog box titled 'open with' * Sub * the files already browser window fill the screen while I'm not yet aware that the box is here.  Having managed to find, I choose "7-Zip File Manager" and click on the box always saying "use the selected program to open this type of file", and then click OK.  This opens the file using the selected program, as you wish.

  However next time I try to open a *.img file, I again get the window "Help file of Type" and must go through the whole process again.  (By double-clicking on the file shows "Windows Disc Image Burner".)  Why don't Windows 'always use the selected program' like I asked?  Windows is aware that I have chosen before, because it is considered to be the only 'recommended program' in the 'Open with' dialog box  Thanks for any help!

  Care to try another tool?  This small utility can help: http://izt.name/apps/types/

  You will find the file type in the list of icons (.img files, then), and then to change what he uses to open the file by clicking on the option 'open' and edit the properties.

  

• Is it possible to move the video of a prelude to another project?

  Is it possible to move the video of a prelude to another project?

  Hi Lekepistol,

  Thank you to try prelude workflows.

  Prelude working with one project at a time. He cannot communicate between different projects. You just need to close the current project, open the other and ingest the file to use.

  Customer feedback is important for us to improve the workflow and functionality. We are working hard to implement the features desired among our products.

  Please fill out the following form with accuracy. We will discuss the suggestions.

  Feature request/Bug Report Form

  Thank you

  Mayjain

• inadvertently, click "always use the selected program to open this type of file" how undefault and redo icon to the icon of white empty file?

  I accidentally click "always use the selected program to open this type of file" on the srt file. How to make it undefault and again the icon to icon file empty white?

  You can do this via a registry change, but it is more appropriate for a typical user to simply use the system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
  System restore

  Ever wished that you can go back in time following a bad fall? With Windows, you can.

  Installation sometimes a driver or a program can make Windows run slowly or erratically. System Restore can return programs and system files from your PC to a time where everything worked, potentially prevent hours of troubleshooting of headaches. This will not affect your documents, images or other data.

  In Windows 7, you can create system restore points more and see exactly what files will be deleted or added when your PC is restored. For more information, see create a restore point.

  For more protection, use the restore system backup and restore, which is designed to help save email, photos, documents and other personal files.

  To use the system restore

  Before you start the system restore, save open files and close all programs. System Restore will restart your PC.

  1. Open system restore by clicking the start . In the search box, type restore the system and then, in the list of results, click on system restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the wizard to select a restore point and restore your computer.

     For more information, see System Restore: frequently asked questions.

  In Windows 7 system restore can prevent headaches hours after an accident.