Using the component radio button to an image on a MovieClip

Similar Questions

• can not read the text of the element (radio button)

  I am developing a Flash quiz. Several questions have several items of choice with text under each option (button). The text is visible that I see the movie, but when I publish it, the text disappears. all I see are radio buttons with nothihng under them. I use the standard radio button component. I develop the quiz in Flash CS3. I adapt it one that I developed in Flash 8. Option buttons worked perfectly in the old quiz.
  
  Ideas anyone?

  The answer is this: I had a few scripts of style on the first image that I had forgotten about, the following:
  _Global.style.SetStyle ("fontSize", 8);
  _Global.style.SetStyle ("fontFamily", "Arial");
  _Global.style.SetStyle ("IncorporerPolices", true);

  When I commented on these stars, the text began to show once again. Donkey, your answer may lie in these global statements of style too - maybe add a bit to define and incorporate the police?

• using the prt screen button with paint

  I used the prt scrn button on the key Board allows to record several web pages, but when I open the paint program, to view my web pages recorded only the last page I captured is present. How paint program saves the pages sent by using the print screen key?

  You have to press print screen then paste the image into a painting.

  It really copies just the last screen you have captured using the key.

• Need to align the two radio buttons in one line

  Hi all

  In my BlackBerry Application, I have a part of the user interface where I need to align two radio buttons in one line.

  I used the code to design the user interface, but the two radio buttons below are overlapping.

  SerializableAttribute public class BBSettingsScreen extends form {}

  Rbg RadioButtonGroup = new RadioButtonGroup();

  RadioButtonLayout raButtonLayout = new RadioButtonLayout();

  raButtonLayout.add (new RadioButtonField ("ONE", rbg, true, RadioButtonField.FIELD_RIGHT));
  raButtonLayout.add (new RadioButtonField ("TWO", rbg, false, RadioButtonField.FIELD_LEFT));

  Add (raButtonLayout);

  SerializableAttribute public class RadioButtonLayout extends Manager {}

  public RadioButtonLayout() {}
  Super(Manager.VERTICAL_SCROLL |) Manager.RIGHTMOST);
  }

  protected void sublayout (int width, int height) {}
  Field field;
  get the total number of areas falling under this Manager of
  int numberOfFields = getFieldCount();
  int x = 0;
  int y = 0;
  for (int i = 0; i)< numberoffields;i++)="">
  field = getField (i); get the field
  setPositionChild(field,x,y); set the position of the field

  layoutChild (field, width, height); Spread the field
  x += 30;
  }

  width = 70;
  height = 20;

  setExtent (width, height);
  }

  }

  }

  Please help on this...

  Thank you & best regards

  Chintada Ravikumar

  Try this:

  RadioButtonGroup rgb=new RadioButtonGroup();
  HorizontalFieldManager hr1=new HorizontalFieldManager(FIELD_HCENTER);
  RadioButtonField radioOne=new RadioButtonField(" RadioOne",rgb,true)
  {
      protected void layout(int width, int height)
      {
          super.layout(75,30);//Width and height according to the button name;
          setExtent(75,30);//width and height according to the button name;
      }
  };
  hr1.add(radioOne);
  RadioButtonField radioTwo=new RadioButtonField(" RadioTwo",rgb,false)
  {
      protected void layout(int width, int height)
      {
          super.layout(75,30);//Width and height according to the button name;
          setExtent(75,30);//Width and height according to the button name;
      }
  };
  radioTwo.setPadding(0, 0, 0, 20);
  hr1.add(other);
  add(hr1);
  

• How to add the table radio button.

  Hello
  
  I want to update the record if I want that an option of button raduio shaped tabular .There is no option for tabular.
  How to add the table radio button.
  
  
  Thank you
  
  Published by: 805629 on February 3, 2011 04:56

  Use APEX_ITEM. BOX API in the definition of SQL query for the form of tables

• tried to send emails using the fast-forward button now e-mail flashes on and outside

  tried to send emails using the fast-forward button now e-mail flashes on and outside

  Please disconnect from the Internet temporarily, if necessary, by disabling a Wi - Fi connection or unplug Ethernet cable, whichever is applicable.

  In the Mail menu bar, select

  ▹ Connection Doctor window

  Look for the email account (SMTP) out in the window that opens. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. We'll pick the one affected. Make a note of the settings. Click the sign to remove, and then click OK.

  Reconnect to the Internet and add the account back with the same settings.

• I can't use the right colors for a web image.

  I can't use the right colors for a web image. CC of Photoshop can replace colors because my colors are 'out of space color to print"or something like that (I hope I translated it well - I work with the Dutch version PS and this forum is English only).

  I'm not interested in printing at all. I don't want an adaptation for printing! I want just the right color to the screen for a web image.

  I changed the settings to color several times, I created my image all over again, but Photoshop maintains replace my bright red to pale pink because of color printing.

  Thanks for your help.

  Use the SRGB color space. and in the color picker when you see the warning do not click the caveat that it solves the problem. Like that will change the color that you want to use.

• I installed a trial of Illustrator from Adobe on my macbook pro. I want to draw a picture using the custom trace button but can not. Does anyone have any ideas how I could track custom?

  I installed a trial of Illustrator from Adobe on my macbook pro. This is the release of 2014 of the adobe Illustrator. I want to draw a picture using the custom trace button.

  I start a new document. Then I place my scanned pencil/color pencil, drawing, in the document. I tried to scan and then placing it as jpeg, bitmap and a tiff file. I tried scanning and place then, in color and in black and white. The scan mode that I use is flat. Adobe Illustrator allows me to select the default button and one of the eleven preset buttons (e.g. photo high fidelity), but cannot me click on the record button custom. The custom trace button is gray while all other buttons are white.

  Does anyone have any ideas how I could track custom?

  Just it trace, and then change the options later. The follow-up is 'live', you can press the buttons and see what happens.

  See also the manual.

• Check the conditional Radio button

  Hello

  I am building a form where I have elements that must be calculated and have the sum in a (TOTAL) field in the digital field.

  What I'm looking for, it is as shown below. If the number that appears in the TOTAL field falls between 130 and 140, i want the first radio button to be activated automatically, and so on so forth for 5 boxes.

  

  Can you please let me know how to achieve this?

  Note: I am very new to Livecycle Designer.

  Kind regards

  I created a sample for you... Please see the attachment. The code to fill the option boxes is on the RadioButtonList object.

  Paul

• Using the mouse scroll button in InDesign (Windows)?

  Is it possible to use the mouse scroll button in the ID? I use a Windows platform. In Microsoft Word, for example, you can use the mouse scroll button to scroll to the bottom of the page. I continue to do it instinctively when I use ID, but it does nothing. Is there a way to tell ID listen to the scroll key, and use it to scroll to the bottom of the page? Thank you.

  Works very well for semi-bas was a little flakey in an earlier version of ID and sometimes I have to restart the application.

  Bob

• Need help with javascript used to check the data in the mandatory radio button fields

  required_fields

  I get a syntax error (SyntaxError: missing: after the id property 17; at line 18).  I am trying to run a script to verify data in all the fields required radio button before letting the user to submit the form (or save).  Here is the code I use:

  var AllRequiredFieldsSet = true;

  for (var i = 0; I < this.numFields;i++)//loop through all form fields)

  {

  var fldName = this.getNthFieldName;

  var currentFld = this.getField (fldName);

  if(currentFld.type=="radio")

  {

  All the radios that are needed to see if the user filled their

  if(currentFld.Value=="OFF")

  AllRequiredFieldsSet = false; one of the option boxes has not been selected, this form cannot be sent

  }

  }

  If (AllRequiredFieldsSet is false)

  App.Alert ("all the required areas have not been met");

  on the other

  this.submitForm ({cURL"mailto:EMAILADDRESS@gmail.com", cSubmitAs: "PDF"});

  Miss me not all media... Any ideas on what I'm missing?

  Thank you! Judy

  These two lines should fix things:

  var fldName = this.getNthFieldName (i);

  ...

  if(currentFld.type=="RadioButton")

• What to put in the xsd schema for the form of the ADF radio buttons?

  Hello, we create a form generated from the data of a HT ADF auto which is a type defined in a schema .xsd. Which schema component Let's in the .xsd schema correspond to buttons option in the form of the ADF? For example, in our .xsd we just

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < xsd: Schema container = ' http://www.w3.org/2001/XMLSchema "xmlns:wf =" " http://www.example.org "

  " targetNamespace = ' http://www.example.org "elementFormDefault ="qualified"> "

  < xsd: complexType name = "FormDataType" >

  < xsd: SEQUENCE >

  < xsd: element name = "FirstName" type = "xsd: String" / >

  < xsd: element name = "Name" type = "xsd: String" / >

  < xsd: element name = "Department" type = "xsd: String" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: Schema >

  What would be the element / type etc be for radio buttons?

  Hi Tali,

  It depends on what you want to do with radio buttons, but it would be better to be a part of string in most cases.

  This could be better handled on the ADF OTN forum, but I'll take a shot at it.  If you have many items to choose from, you can use the string "Department", you already have in your XSD.  When displayed on the form, include various departments with radio buttons next to each other (for example,"manufacturing", "Marketing", "Sales").

  Because this is the BPM forum, I guess your XSD is used as data for a human task which in turn used to create a form of the ADF.  If this is the case, you can use your "Department" in your XSD string element that has already been placed on your form as a text input field.  The reason is the link that you need to update the element of the human task service is automatically created in this way.  Select this field to text, and then in the properties panel, copy the text that is in the 'value' of the field (you stick it in the Value property of the Radio group you will add in the next step).

  There are two ways to get the radio buttons on the form.  You might drag the "Radio group" widget on the form-> click on radio to 'Create a list (select an item)' button-> click the Add icon to add the choices you want to appear on the form (for example,' manufacturing ', 'Marketing', 'Sale').   Once this was added, paste property value text you copied in the previous step into the field of "Value" property of the new Radio group.

  If you select the radio button of the new group source, it should look like this if you wanted two choices for your radio buttons:

  After this has been added, delete the existing text entry field that was created when the form was generated automatically from the human task.

  Hope this helps,

  Dan

• Mobile applications - target component using the component of reference - JSON is not defined in the scope

  Application based Mobile Apps to integrate angular with AEM and transfer data to angular range of AEM using angular.json.jsp and controller.js.jsp. When I am using this standalone as a component and drag to the page that is based on the angular model. The JSON created in angular.json.jsp is readable in controller.js.jsp with "frameworkType = angular.

  When this component is written in another page, in another page trying to use within the reference element, the angular.json.jsp, controller.js.jsp does not come to the image at all.

  I had a use case to create the JSON structure (to go to angular range) in one place, then all pages using the reference component. Pointers would be useful

  Hi Sandeep,

  The best recommendation I can offer at this point is to create an extension of the component/libs/foundation/components/reference that includes the node of cq: model by specifying frameworkType: angular and supports transmission by proxy of applications angular.json and controller.js to the resource "referenced". I've hacked together an example of component to prove:

  Mobile reference component example · GitHub

  Hope this helps,

  Bruce

• Using the crop tool to straighten an image twisted?

  In CS6, I have an image that has been analyzed in and which is twisted. I use the crop tool to drag the landmarks of crop around the part of the image that I want to keep and I press the check mark to make the harvest. It crops the image so it does not straighten. In earlier versions of Photoshop it to crop and straighten the image cropping. How to now use the crop tool to straighten a picture?

  Thank you.

  Here's how:

  1. click on the ruler (straighten) button

  2. the cursor changes to a symbol of the culture to a leader

  3. click and drag a line where you want the picture to the right, and then release the mouse button.

  4. image is recovering, the cursor turns into adjustment handles.

  5. making adjustments to the acreage. Press Enter to save the changes.

• How to get the input of &lt; af:dialog &gt; data using the custom command button?

  Hi all
  
  What will be the best way to get the data entry of the contextual dialog box by using the command button?
  
  I use jdev 11,112.
  
  can I use action or actionlistener?
  
  If I use the action, I can get data from managed bean. but not the actionlistener.
  
  can I use action or actionlistener?
  
  With respect,
  WP

  Hello

  Try to set the immediate property to true on the button Close (only put to the inputText component)

  Jean Lou