EA3500 USB storage security

Similar Questions

• How can I prevent users to connect to a USB storage device?

  I would like to block the connection to a device of USB storage except adminisator account?

  Referring to the following link, there are no instructions on how to do it.

  Anyone have any suggestions on how to do this in Windows 7?
  Thanks in advance for your suggestions :>

  http://support.Microsoft.com/kb/823732

  You need to remove the menu setup USB device, as if it was never installed. Physically

  Remove the USB device - run USBDeview and remove it - Reboot - then set up the
  Users do not allow a USB - reboot and you connect as a user - NO ADMIN - try to insert
  the device.

  You can get more ideas on the TechNet forums I listed previously.

  You have really need professional or above to be able to set security policies.

  Rob - SpiritX

• Satellite Z830 - backup on USB storage drive recovery

  I need to make the backup of this Z830 recovery system.
  But unfortunately, the system does not recognize the usb storage drive to make this recovery.

  Obviously, the storage usb drive have plenty of space and OK to work on this Z830.

  Any suggestions?
  Thanks in advance

  Hello

  The recovery image can be created on a CD/DVD disc or USB memory stick. As far as I know you cannot use a common USB HDD for recovery.

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• IX2 - usb storage device?

  I have a storcenter ix2 and wonder if it can be used as USB storage connected in local device or is it strictly a SIN?

  Thank you

  DTK,

  The ix2 is strictly a NAS.

  However, these things can be circumvented these days.

  If you are inclined to do, you can buy a USB adapter to Ethernet and / access handle the actions in this way.
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=USB+to+Ethernet+adapter

• Notification of 'removed USB storage device' persistent.

  Hello

  My motorcycle G shows after persistent notification.

  'USB storage deleted '.

  Removed USB storage. Insert new media. "

  This notification is displayed after removing the Flash drive by removing it from settings-> storage and pulling the OTG with the drive cable. The notification seems to be stubborn and it can not be erased it unless the device is reset. It isn't harmful, but because of my OCD (mandatory disorder that) for the verification of notifications is causing irritation.

  I notice that only KitKat 4.4.2 and not JellyBean 4.3.

  Any ideas to clear the notification? or is this a bug?

  Thank you

  Ngom

  Update:

  I uploaded a screenshot and added a correction in question (the correction is in bold).

  Hey all,.

  This bug has been reported and a fix is under way.

  See you soon,.

  Nicole

• HP Compaq 8100 Elite: Boot interrupted by the USB storage device

  If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

  I disabled each device start-up apart from the internal SATA hard drive and it still happens.

  Finally I found a BIOS update.

  On the HP consumer Support Site? NO.

  On an alley, ad - ridden, dirty pilots-for-all site.

  Anyway. It worked

• Disable the peripheral only USB storage drive?

  How can I disable only USB key in windows XP Professional without disable keyboard and mouse because these are fixed with USB ports.
  Operating system: Windows XP Profesional

  Hi adeelahmed,

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How can I prevent users to connect to a USB storage device?

  http://support.Microsoft.com/kb/823732

• Impossible to disconnect itself from USB storage devices

  Original title: USB storage devices

  Once more I couldn't properly disconnect a USB storage device because Windows tells me that a program is still using the device. There is no reason for any program to access it then why on earth isn't Windows the task/program name so that I can address the issue instead of having to restart my computer? Of the many irritants "characteristic" of Windows, it is one of the most galling.

  Hello

  ·        What is present in the USB key?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  If there is nothing important in the USB device, I suggest you to format the device and see if the problem still occurs.

  Note: If there is no important data in the USB then, back up data, and then format the USB.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Drag and drop copy from C: to a USB storage device

  I saved a few songs my cloud storage on my C: drive.  How can I highlight these files and drag / drop in a device of USB storage for future use?

  The flash drive should show in the view of "Computer" (on Windows XP is called 'My Computer') similar to a player.  Just double click on the flash player and then paste the songs.

  DRM - Digital rights management - it prevents moving songs of moved between devices.

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• Connection of external USB storage

  I connected an external hard drive (WD "My Passport", 300 GB) USB to my router (Cisco EA6500). The drive has been formatted to NTFS. My services 3 computers router.

  I looked at the Linksys WiFi Smart 'External storage' tools and see the FTP server is 'On', DLNA is 'On' and ensure access to records is 'On '. Access to the files tab all my computers have the permission to write & Edit and Delete actions.

  The external drive appears in the LinkSys WiFi Smart as a 'Network Device' online program.

  But it does not appear in Windows Explorer (or file such that named in 10 Windows Explorer).

  I'm unable to access this storage to record data, how do I do so?

  Hi, rszanti. Were you able to map a network drive on your computer? Network drive mapping is necessary so that you can access a device USB storage or storage network (SIN) attached to your router.

• EA6400 Problem FTP USB Storage

  When I do not restrict access to the files I can reach them by FTP

  

  When I restrict access I can't reach them more

  After usin my login, I got this screen

  

  As seen: the Transcend is not visible.

  Yes, I have the right to see and write about the USB storage.

  Anyone a suggestion?

  Use username: admin and password: the router password (default admin). Do not use your Linksys WiFi Smart password.

  Are you able to access the drive locally using the user Remi? The fact that you have checked the part of Transcend when you created the user Remi?

  Try the suggestion of Chadster by creating a new user, and then clear the browser. Or you can try using a different computer.

• EA6400: No detected USB storage

  Hello

  I have an EA6400

  At the back, I connected a Portable USB 3.0 hard drive (StoreJet 25M 3)

  The router does not detect this drive also does not after using the Refresh button.

  Someone knows a solution?

  (When directly connetced on the desktop I can do everything with this disc: reading, writing, etc.)

  I don't know what happens, but today, I was free and I work with the system and surprising: the USB storage device is detected and logged.

  It's working now.

• Deletion of data (step by step) USB storage device

  I need to know how correctly, step by step, remove a usb port connected data storage device. I am currently using, Windows visit Home Premium. Thank you...

  By the clock in the bottom right notification area, you will find an icon. Hovering over it said something like 'remove hardware safely '.

  Double click on this button.

  Find the usb storage device in the hardware list.
  Select this device.
  Click on stop / remove safely

  Wait until you receive a notification that can be removed.
  Remove the USB port.
  If so, you can now safely unplug unit from wall outlet as well.

  I hope this helps.