Using the page as a condition for interactive report item value

Similar Questions

• Use the filter in a creation of interactive reports

  Hello world
  
  We put in point 4.1 of the APEX.
  
  I have a page with interactive reporting. I have different columns.
  
  In the Source of the region, one of them:
  
  SELECT...
  …..
  DECODE (ACT. INACTIVE_INDICATOR, 1,' < img src = "& APP_RESOURCES_EXTERNES.themes/theme_13/check2.gif" > ',' ') inactive
  ….
  ….
  As we saw earlier, if our INACTIVE_INDICATOR is set to true (1) show us a sign of verification, otherwise nothing will be shown.
  
  But, when we do a filter on this column, the url is displayed. But it's not a pretty sight. Is it possible to display the control panel or something different?
  
  In general, is it possible to control the filter options?
  
  Thank you. Good bye.

  Your Interactive report MUST have a model region for dynamic Action at work; otherwise there is no region ID in the DOM.

  This is the usual problem with the help of JQuery on interactive reports

  Shunt

• Issue using the presentation as filter condition variable in reports

  Hello
  
  I have a problem using the variable presentation as a condition of filter in my reports, the details are the following:
  
  Details:
  --------------
  We want to implement the Max and Min variable through variable presentation only.we are unwilling to apply it in this case through session variables.
  We have two variables MIN and MAX to be used as Variables of presentation, to a column of the report (which is a quantity), so that the user wants to see the data in this column in a particular range.i.e the Min and the Max.This part was well put in place. The question is when the user wants to see comprehensive data. In this case we will spend not all values of these two variables of presentation or in other words we do not limit the data in the report so we do not any value to the variables, it's when the report is throwing the error. We want to leave this empty variables in this case.but is in error.
  
  Please suggest how can I overcome this problem.
  
  
  Thanks in advance.
  
  Kind regards
  Praveen

  Hello
  Don't forget to assign points before closing the thread

  Thank you
  saichand.v

• Model of User Interface for interactive report region

  3.2 where we establish the model of user interface for interactive reports region?
  
  No matter what on the theme of the box I go to, the region of interactive reports shows the same. What and where do I change the model so that alternate lines use two different colors?

  There is no model for interactive reports as for a 'normal' report You need to edit the CSS and provide your own for this purpose.

  I think that most of the things are marked with the #apexir - firebug with combustion chamber is priceless. This thread may help:

  Re: changing the appearance of the interactive report.

• How to use the Page number in the IF condition

  Hello
  
  I have an obligation to change the output based on Page numbers. Can you please help me how to use the Page number in IF condition.
  
  Thank you

  Can u send me a sample xml and RTF file to my email in my profile identification, so that I can have a look.

• How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.

  How can I move the button reload of the page in firefox OSX for next to the back button where it was before I updated.
  I know there is an addon for windows Classic theme, but I need a fix for osx... its very frustrating when you update and things like this change and can be customized to the way we are used to using the browser. his counter intuitive to have the page button refresh so far from the back and home buttons.

  never mind, I found the preferences in the addon manager... Thanks again!

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Using the page submit after elements in the process of treatment page

  Hi all

  I have a form of DML in which the user can update a column.

  After clicking the Apply Changes button that I need to send an email saying the record has been updated with some page elements in the body of the email.

  I am able to send email, but I'm not able to display the page elements in the body.

  After changing the save the session state for the 'yes' also he did not.

  Y at - it another option that must be set so that I can use the page elements in the body of the email.

  Thank you

  MJ

  Make sure that after settlement it is normally a reset page call, is perhaps what kills the variables you are trying to access.  You should put your mail send processes PRIOR to the reset page process...

  Thank you

  Tony Miller
  Los Alamos, NM

• Some hyperslinks in the exported PDF file takes the Viewer to the pages "broken/missing. For example, the hyperlinks to specific of Youtube videos does not work, they brought to a youtube page is missing.

  Some hyperslinks in the exported PDF file takes the Viewer to the pages "broken/missing. For example, the hyperlinks to specific of Youtube videos does not work, they brought to a youtube page is missing.

  Hi Sarah!

  I solved it! I had to use the original URL shorter links to create

  functional hyperlinks or try to short the links using Google URL Shortener.

  I don't know why it worked by doing this, but he did!

  With the friendly and happy greetings!

  Sonny. A

  2015-11-24 9:32 GMT + 01:00 aadeshs76610910 [email protected]>:

  You talked

  by aadeshs76610910

  https://forums.Adobe.com/people/aadeshs76610910?et=notification.mention> * in

  Re: A few hyperslinks in the exported PDF file takes the Viewer to

  pages "broken/missing. For example specific Hypertext to Youtube videos links

  does not work, they will bring to a youtube page is missing. in Adobe

  Community *-view aadeshs76610910 you reference

  https://forums.Adobe.com/message/8209923?et=notification.mention#8209923>

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• I downloaded 4 FF and now 5 and nor with my screen looks nothing like it says on the page of FF. For example, I don't have the orange FF tab in the upper left corner, I have no "PIN as app" option, nor do I view. Can someone help me please?

  I downloaded 4 FF and now 5 and nor with my screen looks nothing like it says on the page of FF. For example, I don't have the orange FF tab in the upper left corner, I have no "PIN as app" option, nor do I view. Can someone help me please?

  To get the orange FF tab, go to view > toolbars > menu bar. This should uncheck the menu bar giving you the orange button.

  Panorama is a box made of 4 gray rectangles which should be on the far right, if not once you activate the orange FF tab, right click anywhere on a toolbar that doesn't has nothing to this topic, and you should get a menu with a list of your toolbars that you can check and uncheck the box. Come on down to personalize everything down and it will open a window with all your buttons. Find groups of panorama/tab button and drag it to the toolbar of your choice.

  to pin a tab as an app, right-click on it; It is an option in the context menu.

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• The application has failed to start because its side-by-side configuration is incorrect. See the application event log or use the command-line sxstrace.exe for more details

  Hello

  I can t open Google Earth or Microsoft Office programs because I get this message - the application could not start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details.

  A few days ago I could open all what programs. I put t know what is the problem.

  I did sxstrace and that's what I have-

  =================
  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = Wow32
  CultureFallBacks = en-US; en
  ManifestPath = C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe
  AssemblyDirectory = C:\Program Files (x 86) \Google\Google Earth\client\
  Application configuration file =
  -----------------
  INFO: File analysis shows C:\Program Files (x 86) \Google\Google Earth\client\googleearth.exe.
  INFO: Manifest definition identity is (null).
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4053".
  INFO: Resolving reference for ProcessorArchitecture WOW64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50727.4053__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
  INFO: Found no manifesto for the neutral culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for ProcessorArchitecture x 86.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.5592_none_517247830f45081d.manifest
  INFO: Start the detection of assembly.
  INFO: End detection of assembly.
  ERROR: Activation context generation failed.
  End activation context generation.

  Help, please!

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  I hope this helps.