Issue using the presentation as filter condition variable in reports

Similar Questions

• Using the page as a condition for interactive report item value

  Hello. I add a button named edit in one of the interactive report column. This button should be displayed under certain conditions. Conditions are 1) If the user is Mencis and 2) value of the page called P2_DUMMY is 2. The value of P2_DUMMY is to 2 when a button is clicked. I defined a dynamic action for this. The problem is that I don't know what the condition of being added to the interactive report query.

  
  

  I tried

  CASE WHEN: APP_USER IN ('Mencis"). WHEN BOX: P10_DUMMY = 2 THEN ' < button type = "button" class = "button-default"; ">

  < span > edit </span > < / button > ' END I just get errors.

  If I just put the condition as

  CASE WHEN: APP_USER IN ('Mencis") THEN ' < button type ="button"class ="button-default "; "> < span > edit </span > < / button > ' END

  button is displayed in the report. If I add the second condition, all I get is error. I don't know how Add an element value of the page as one of the interactive report conditions. Please help me on this.

  Mencis Joe wrote:

  Hello. I add a button named edit in one of the interactive report column. This button should be displayed under certain conditions. The conditions are 1) if the user is Mencis and 2) value of the page called P2_DUMMY is 2. The value of P2_DUMMY is set to 2, when a button is clicked. I defined a dynamic action for this. The problem is that I don't know what the condition to be added to the interactive report query.

  I tried

  CASE WHEN: APP_USER IN ('Mencis"). WHEN BOX: P10_DUMMY = 2 THEN '

  Edit

  ' END I just get errors.

  If I just put the condition as

  CASE WHEN: APP_USER end of 'change' ('Mencis") THEN

  the button is displayed in the report. If I add the second condition, all I get is error. I don't know how to add a value to the page element as one of the interactive report conditions. Please help me on this.

  Combine the predicates in the CASE expression by using an AND condition:

  case
    when    :app_user = 'Mencis'
        and :p10_dummy = 2
    then
      'Edit'
  end
  

  Hardcode a condition like the :app_user = 'Mencis' is likely to prove problematic for all sorts of reasons, not least including the value of APP_USER is uppercase by default, unless otherwise during authentication.

  Note that the semicolon and extra double quotes in Edit are not valid.

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  Sorry for the delay. Here is the video

• Cannot use the shake reduction filter

  Photoshop CC Hello, I can not use the shake reduction filter I get the message: unable to allocate more virtual juxtaposition. Why? thank you for helping me to be able to evaluate these new features!

  Thanks to remove the automatic reference!

  Your display drivers are seriously outdated, they are of 2010!

  Go to the AMD/ATI site and search for compatible drivers.

• Using the default date for a variable presentation

  In the report, I want to use the default date of the variable presentation.
  If I use the query as below, default is correctly.but if I pass the dash prompt date value that is throwing error
  
  Someone help me change the below
  request for valid results?
  
  TIMESTAMPADD (SQL_TSI_day, (dayofmonth(date @{asdf}{date '1900-01-01'}) *-1) + 1, date @{asdf} {date ' 1900-01-01'})
  
  Published by: user12255470 on December 2, 2010 12:11
  
  Published by: user12255470 on December 2, 2010 12:12

  Try this:
  TIMESTAMPADD (SQL_TSI_day, (dayofmonth(date '@{asdf}{1900-01-01}') *-1) + 1, date ' @{asdf} {1900-01-01} "")

  Mark answers quickly.

  J
  -bifacts
  http://www.obinotes.com

  Published by: bifacts on December 2, 2010 15:21

• Can I use the timestamp to a global variable that is published to network to reduce network traffic?

  I would use a couple of network-has published the global variables that will contain large groups of data.  I want to host them on a device, but read them in several - consider a distributed control system.  The data will be updated very rarely, but when that happens, I want that all my GUI to know quickly.  I have all the GUI, simply read data 4 x per second (which would be fast enough), but I was wondering if there is a more elegant solution (always using global variables).  If I read only the timestamp 4 x per second each of the HMI, compare to the last reading and then interrogate the integer variable if timestamps are different, which will require fewer resources that just enter the integer variable each time?  In other words, the read timestamp uses the same amount of resources as the reading of the entire variable?

  With really simple code, assuming that the cluster "Data" is big enough, made...

  .. .get me no benefit on...

  mark3545 wrote:

  Which means that they are already doing what I want anyway, no?  If the reader is updated when it changes the writer, I can survey as often I want without increased traffic, correct?

  That is right.

• Is it possible to use the presenter 11 with my student and teacher of creative cloud account?  I want to use to create tutorials for teaching.

  I want to use adobe presenter 11 to create content and training videos to post online.  Is it possible to do this with my students of cloud creative and account of the teacher?  Is the use of this software included in the subscription or is it another subscription?

  11 host is not part of the creative cloud subscription. Please check Adobe Presenter 11 - create courses e-learning PPT Slides and desktop applications Adobe Creative Cloud | Adobe Creative Cloud

• Issue using the ENGINE table MEMORY SUNOPSIS (high priority)

  Hi gurus,
  
  It is to launch an operator, like any error by using the SUNOPSIS MEMORY ENGINE to generate a .csv file using the database as a source table.
  
  ODI-1228: SrcSet0 (load) task fails on the target connection SUNOPSIS ENGINE table SUNOPSIS MEMORY ENGINE.
  Caused by: java.sql.SQLException: unknown token
  
  (LKM used: LKM Sql to Sql.)
  IKM used: IKM Sql to add files.)
  
  can you please help me about this ASAP so that it became a show-stopper for me to go further.
  
  Any help will be greatly appreciated.
  
  Thank you very much
  Pavan
  
  Published by: Pavan. on July 11, 2012 10:22

  Hi all

  The issue has been resolved successfully.

  The solution is
  We need to change the E$ _, I have$ _, J$ _,... E_, I_ , J_... ((c'est à dire, enlever le symbole '$')) in the PHYSICAL SCHEMA of ENGINE table SUNOPSIS MEMORY according to the information provided below.

  When interfaces running and using an XML schema or file complex as the transit area, the 'Unknown token' error. This error is caused by the HSQL (2.0) updated version. This new version of HSQL requires that the names of tables that contains a dollar sign ($) are enclosed in quotes. Temporary tables (loading, integration, etc.) that are created by the knowledge Modules do not respect this requirement on the technologies of complex and HSQL records.

  To work around the problem, change the physical schema definitions to remove the dollar symbol ($) of all paintings of prefixes work. Scenarios must be regenerated with these new settings.

  It has worked well for me.

  Thank you
  Pounet

• Illustrator javascript save them to PDF - issue defining the values listed as a variable

  Hello

  
  

  I'm trying to figure out how I can use a variable as the target for a save as PDF option in Illustrator javascript. the work of fine variables where there is no value listed for the property that is opts.generateThumbnails but I can understand how to run opts.compatibility or other properties with the values using a variable as the definition listed.

  
  

  Example code snippet below will always give an error "The enumerated value should" during the opts.colorCompression option even if the string is correct.

  If I define chose him as opts.colCompression = compressionQuality.AUTOMATICJPEGHIGH then everythings works

  
  

  Does anyone know how I can set the compressionQuality.AUTOMATICJPEGHIGH as a variable will work

  
  

  TKS

  
  

  Code snippet

  
  

  OPTS = new PDFSaveOptions();

  OPTS.Compatibility = PDFCompatibility.ACROBAT5;

  opts.generateThumbnails = thumbnailValue;

  opts.preserveEditability = editingValue

  OPTS. Optimization = optimizationValue;

  opts.colorCompression = colCompressionDefault;

  
  

  default value is defined at the beginning of the script like: -.

  var colCompressionDefault = "compressionQuality.AUTOMATICJPEGMAXIMUM";

  
  

  Alert ("Options of Compression of color =" + opts.colorCompression);

  
  

  for (x = 0; x < doc.artboards.length; x ++)

  {

  
  

  doc.artboards.setActiveArtboardIndex (x);

  var artboardName = doc.artboards [x] .name;

  
  

  If ((artboardName.match (/ ^ imprimé / i)))

  {

  opts.artboardRange = x + 1;

  expFile = file (destFolder + "/" + "stringname" + "-" + doc.artboards [x] .name + ".pdf");

  doc.saveAs (expFile, opts);      It is the privilege which fails

  }

  }

  
  

  Close the open document

  sourceDoc.close (SaveOptions.DONOTSAVECHANGES);

  If you have information on how I should set...

  I do it, I showed you how, in my previous post, Javascript is case-sensitive,

  It does not exist

  compressionQuality.AUTOMATICJPEGMAXIMUM
  

  This is done

  CompressionQuality.AUTOMATICJPEG2000MAXIMUM
  

• Use the button to set a variable

  Hi, can someone help me.

  I would use a couple of buttons I made to set a variable. I would use the name of the instance of the keys as the value stored in the variable. How can I code this?

  Thank you.

  You can use the currentTarget of the event to target the button and acquire its name...

  var btnName:String;

  btn.addEventListener (MouseEvent.CLICK, storeName);

  function storeName(evt:MouseEvent):void {}
  btnName = evt.currentTarget.name;

  trace (btnName); will trace "btn".
  }

• Using the SQL with CFQUERY statement variable

  I generate a SQL statement based on user input. I use loops, etc. to create the string of the current statement.
  
  Once the SQL string is created I can display it on the screen and it seems fine.
  
  If I copy the text that appears on the screen and paste it into a CFQUERY, it works very well.
  
  BUT if I try to the variable output directly in the CFQUERY tags set string - it fails... what gives?
  
  Here is the text of the string I am generating in a variable called #insertString #.
  
  INSERT INTO atblProduct (PRODUCTTITLE, RELATEDPRODUCTS, PARTCODENAME, DISPLAY, PRODFAMILYID, DETAILEDDESCRIPTION, overview, APPLICATION type, SPECIALTAB) VALUES (' product ', '1,2,3', ' Code Name', 1, 1, 'Detailed Description', 'Preview', 1, 1)
  
  in the code below, you will see how I try to run this sql using the variable in a CFQUERY tag. Do I need to use a CF function to ensure it is passed verbatim to the SQL engine?
  
  < CFQUERY datasource = "mydb" >
  #insertString #.
  < / CFQUERY >

  Try the function PreserveSingleQuotes.

• Issue using the external monitor.

  I was given an external monitor that I could connect to my laptop.  I forgot the keys I had hit to use the external monitor.  I got disabling it on the screen that turned my monitor on the laptop.  I can't find a way to re - turn on the monitor.  I can't have anything other than a white one on my laptop screen.  I would really appreciate how to turn my monitor on the laptop.  All information would be welcomed.  Thank you-dukey41

  Hello

  Check with the manufacturer of the laptop's support, their books online and ask in their forums.
  Some have special tools/methods to control one 2nd monitor other than Windows,

  Right click on the desktop - properties Graphics

  Right click on desktop - graphics Options

  Right click on desktop - customize - display settings

  These should help you to implement and control.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Multiple monitors: frequently asked questions.
  http://Windows.Microsoft.com/en-AU/Windows-Vista/multiple-monitors-frequently-asked-questions

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• using the file.openDialog filter expression

  Read the PDF Adobe JavaScript. I can't understand how we can filter the files available in the File.openDialog range. I would like to have the limited choice of .csv files. I know that I have a different method depending on whether the user is on a mac or a PC.

  Understand the function of filter on OSX was not obvious to me too.  Available version of Adobe's JavaScript Tools Guide which has a real-world example of the filter function, then I found this thread which has a very good example of implementation.  Then there's the StackOverflow answer to a question I posted this topic.  Hope these references help.

• Use the same image twice column in a report

  Hello

  I have a question which is, I can use the same column (column A in the example) picture twice in a report? first occurrence (column A) will show the thumbnail of the image and the second occurrence (column A) will display the image download link that opens the picture in a new window. Is this possible?

  Thank you

  Alexander

  -APEX-perf wrote:

  Yes, it is possible. However, if you intend to have two different images, then I would suggest you use javascript to link or download the blob.

  What's happening on Earth? Why JavaScript is necessary to download two different images? Even if he was in any real way, the OP is clear that the link posted of thumbnails and download involves the same image.

  To accomplish this task, you use decode or create a union query.

  No, all that should be necessary is the image column twice in the projection of the reference report query and apply a mask download format to a column and one mask of the image to the other. That the OP apparently did not this probably indicates that they are unnecessarily complicate things.

  For example:

  Select '' link_col

  table

  where allow_view = 'Y '.

  Union of all the

  Select '' link_col

  table

  where allow_view = ' don't

  or

  Select decode (allow_view, 'Y',

  '',

  ("") link_col

  table

  What is downloadImg? It is not a Standard API JavaScript APEX. Therefore, it is highly unlikely that this is of no use to the op.