using variables in a URL call

Similar Questions

• using variables loaded into url

  I have a text file that I load a variable paths using:
  
  loadVariablesNum ('get_xml_path.lasso', 0, 'POST');
  
  A dynamic text on the stage with var field set to paths displays the variable: 90ZESJAN06
  
  However, when I try:
  
  var my_url = (' ' http://myurl.com/flash/ ' + paths + '.xml');
  trace (my_url);
  
  I get: http://myurl.com/flash/.xml
  
  What I am doing wrong?
  
  Thank you
  
  

  Thanks Phil... I was on the wrong track. I was not given a time limit for the variable to load before trying to use it. Now that the fixed, it works fine.

• using a variable in a url

  Hello
  Thanks for checking! I am trying to set up a folder in a url as a variable
  
  Here is what my code looks like before I try to use a variable in the url. And it works very well.
  
  var nextImage:String = "events/1.jpg";
  this.loaderTarget_mc.loadMovie ("loader.swf")
  
  
  But when I try to set the events folder as a variable I no chance.
  
  Gallery of the var: String = "events."
  var nextImage:String = "(gallery) / 1.jpg";
  this.loaderTarget_mc.loadMovie ("loader.swf")
  
  
  I hope that what I'm doing wrong here will be obvious to someone who knows more what to do. Any ideas?
  
  Thanks again
  Scott

  Using the variable inside a string delimiter, it will be as string. Then put the variable outside of the dual code.

  var Gallery = nextImage:String + "/ 1.jpg";

• Use variables in the names of MovieClip to call ASP 3.

  This line of code works very well for me:

  this.helpB1Btns.helpB1B3.alpha = 0.3;

  But I wonder how can I use variables instead of numbers (1 and 3) above?

  I mean for example:

  var i: int = 1;
  var j: int = 3;

  This ["helpB" + i + "BTNS.helpB" + i + "B" + j + '.alpha'] is 0.3;. Error
  ["helpB"+ i + "Btns.helpB" + i + "B" + j +".alpha '] = 0.3; Error
  This ["helpB" + i + "Inclinometer"]. ['helpB' + i + 'B' + j ".alpha"] plus 0.3; Error

  For example, this code works fine:

  This ["helpB" + i "Inclinometer"] .alpha plus 0.3;

  (this.helpB1Btns.alpha = 0.3 ;)

  But I have no idea of this code:

  this.helpB1Btns.helpB1B3.alpha = 0.3;

  I appreciate your help or no matter what reference I could learn this basically?

  yours,

  Ali

  use:

  This ["helpB" + i + "Inclinometer"] ['helpB' + i + 'B' + j] .alpha = 0.3

• Impossible to use variables shared when deploying an exe file

  I tried to use variables shared for some time. I have been all over the forums and still have had no luck. I can get these VI to work until I have install on another PC while they do any work. I don't know what I'm doing wrong. I forced libraries to deploy, but they still do not work on the machine, that I install the exe file. I don't think that libraries are being installed. I can't see in the Distributed System Manager. I can see libraries on other machines, but not on the one that I have.

  Have you included libraries in section always included the source files.  You did, and then change the destination of the library of media files on the Source code file settings tab?

  In the code are you using the correct path when calling the libraries deployment method.   Current path of the VI should be stripped twice and have "data\name.lvlib" built in the end.

• Using Variables in Session for a user connection - sometimes they persist... What am I doing wrong?

  Hi all

  I run a site that requires a user login.  I walked up to the construction of this site as almost a complete newb to CF (and dynamic coding in general), and it's been an experience great learing (with lots of help from you guys).

  However, I guess I never learned the correct way to manage a user login.  It seemed to me that I could just test the credentials entered by the user against the stored in a database, and then set a variable containg of registration number of the user session.  So, not only did I would have an easy way to know who was this user and, therefore, what information to serve, but I could test the existence of a valid connection on all pages in the protected folder, by adding this code to my application.cfc in this folder:

  < cfset This.Sessionmanagement = true >
  < cfset This.Sessiontimeout = "#createtimespan (0,8,0,0) #" >

  < cfif NOT isDefined ("session.username") NOT isDefined ("session.password") or NOT isDefined ("session.storeID") >
  "" < cflocation url = "... / index.cfm" addtoken = "no" >
  < / cfif >

  .. .and he continues to run a query and verify that the session.username and session.password correspond to the store defined by session.storeID.  If this is not the case, all session variables are erased and it bounces you to the login page.  When the user clicks on logout, everything I do is remove all session variables.

  This seemed ideal for like a year of work, but lately, I've been doing indicates that the connection does not seem to persist for more than 20 minutes of inactivity.  You can see I specified session variables to stay active for 8 hours (I know that sounds like a considerably long login, but that's what is needed for this application).  I just received this report of a few people, and I myself can't seem to reproduce... I tested an idle connection for 45 minutes now and held it.

  SO: any reason can you think why the session variables may be compensation for some people spontaneously?  Having your router reset his IP address would not invalidate the session or something?  In addition, the problem seemed first appearing after that my improved host all their servers to CF9... could there be a report any with?

  And in a more general way... I go about this completely the wrong way to start?  If Yes, what is the standard way to manage a connection?

  A lot of questions, I know... Thanks a lot for your replies and suggestions!

  Joe

  Unfortunately, it is the nature of the HTTP web requests.  There is NO State maintained from HTTP request to another.  This is normal in the HTTP protocol specifications.

  ColdFusion provides two methods to work around this limitation.  Each method has limits and warnings.  They both rely on the passage of tokens between the client and the server with every request.  These tokens can be passed as variable cookies or URL (GET).  You use the cookie method, which is the simplest and most common. You can experience the limitation of this method.  If something happens to the cookies that the session may be lost.

  You can pass tokens (CFID and CFTOKEN) or JESSIONID through with each request URL query string.  This requires that we add these values for each link, form, cflocation action or other path of the application in our application.  ColdFusion allows the session.urltoken variable to make this easier to do.  The chips will be visible to the user.  If links with an individual token is to share with other users, via e-mail, chat, social networks, etc. and one of those users also use the link for the duration of a session (8 hours apparently in your case).  While the user will access the original user's session.

  Cookies session management is by far the more common choice by the developers of CF.  If these methods do not meet your needs, you would need to go beyond the limitations of HTTP to web applications.  You may be able to achieve with Flex | Air | Flash applications that can be configured to use a connection permanently to the server.  Therefore not suffer nature without cycle State normal HTTP request-response.

  I don't know if a reset of the router would cause cookies to be retired or otherwise invalidated.  But I think that this goes beyond the relm of possibilities.

• How to send different value of variable presentation in URL GO?

  Hello
  I use GO URL to send presentation Variable (d_pv) to filter the other report on column 'day '...
  
  "(a href = http://server/analytics/saw.dll?GO & path=/shared/BI%20Reports/Ki1/KPIs%20Detail%20Priority%203%20Shipped & Action = Navigate & p0 = 1 & p2 & p1 = eq ="Time". Day & p3=@{d_pv}) SHIPPED (/a)'
  
  
  It works very well. But my goal is to filter the report by using the eve of the value of d_pv (for example. If the value of d_pv is ' 2010-04-27', I need to filter the others using report "(2010-04-26')"
  
  I couldn't find to spend one day back value of presentation using variables go url.
  
  Help, please...
  
  Published by: bob123 on April 28, 2010 10:15

  I would say use TIMESTAMPADD(SQL_TSI_DAY,...,1) and use spend your variable in this column.

  When you spend the day report 28/04/2010 + 1 column target, it will display the 27/04/2010 data.

• How to add a session variable to a url?

  I try to update a record, then go to another page that needs an url parameter in the address to the recordset with the subject of the page. I have the setting in a session variable egg don't know how to add to the url in the box in the dialog updated to record. I use the VB ASP script in Dreamweaver CS3.
  Can someone help me?

  I found the answer. I tried to redirect to another page after editing a record. Url redirection requires a derived parameter of a session variable. My url with the parameter was the following: "trRecordClassesDetails.asp? ID = ' + Session("TrainingDateDetails") + '" when I tried I got an error "Application uses the value of the wrong type for the current operation.

  Solution:
  I read on another forum that the parameter name of the term 'ID' to a certain number. The session variable that I use for the parameter returns a number, but when I changed the name of the parameter to 'AgtID' instead of 'ID' everything has worked. The new URL is now:
  "trRecordClassesDetails.asp?" AgtID ="+ Session("TrainingDateDetails") +". "

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• using my yahoo Messenger to call the voice call, I can hear them but they don't hear me.

  update my windows Repir
  My problem in my computer when I use the control panel but I reallydont know my computer problem im using my yahoo Messenger to call calll voice to my family, I can hear them, but the problem I can not hear them

  Hi Kimberly,

  Please provide more details - such as what exactly is the problem with Windows Update?  Work any or you have problems with only a few updates (and if so, what are the numbers KB)?  Can update you manually from the Microsoft Download issue KB site (assuming that you can get to the point where you can even see that)?  Is the problem with all forms of update or automatic updates?  When did start?  Is the only problem that you encounter using the Panel of configuration-Windows Update?

  As far as Yahoo Messenger goes, I recommend you seek assistance for their support to the: http://help.yahoo.com/kb/index?locale=en_US&page=product&y=PROD_MSNG&pir=7V.5laVibUnuoUu5c5XhZBBabICc7x5O4gEqzWIp0oGQmrFMhkLSxkV35MZ8jMUxDeQJkHWotyOSbrdkRCYfcW.Bvc7wn9THHnEG5w- dig deeper, I found a chat to help option in addition help topics.

  I hope this helps.

  Good luck!

• Using variables on localization files

  Hi all!

  I would like to know if it is possible to use variables on the HR files, so they could be replaced by a dynamic text while the application is running.

  My point is, I need to post this message on an alert:

  "Hi Carlos, the pleasure of you review", "Carlos" is the user name and of course it's different for each installation.

  Must be something like this:

  key: GREETINGS_MSG

  value: Hi %s, the pleasure to see you

  And then.

  Dialog.Alert (_res.getString (GREETINGS_MSG, "Carlos").

  So, is it possible to do this?

  Thank you!

  According to what you're asking, it's what I found.

  See if you can try this:

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/i18n/MessageFormat.html

  http://Java.Sun.com/J2SE/1.3/docs/API/Java/text/MessageFormat.html

  Example:

  Object[] arguments = {     new Integer(7),     new Date(System.currentTimeMillis()),     "a disturbance in the Force" };
  
   String result = MessageFormat.format(     "At {1,time} on {1,date}, there was {2} on planet {0,number,integer}.",     arguments);
  

• You can use variable substitution in the Calc script.

  Hi guys,.

  I want to use variable substitution in the calculation script. I v_SECSUBAREA that my substitution variable and its value would be like C12.00 or C13.00 or C12.00, C13.00.

  But it gives me error mentioned below by checking the syntax of the calculation script.

  Error: parsing formula [statement of DIFFICULTY] (line 15) 1200315 error: invalid object type

  Calculation script:

  -----------------------------
  

  FIX (& v_CLEARYEAR, & v_CLEARMON)

  FIX (& v_SECSUBAREA)

  DIFFICULTY ('REPGBP', 'REPEUR', 'REPUSD', 'local', @DESCENDANTS ("DIVISION"), @LIST(&v_SECDNBENTITY), @DESCENDANTS ("SubAnalysis"),

  @DESCENDANTS ("RTNROW"), @DESCENDANTS ("RTNCOL"))

  CLEARDATA "RESUB."

  ENDFIX;

  ENDFIX;

  ENDFIX;

  Variable substitution:

  ----------------------------------

  PRC

  COR_ALL

  v_SECSUBAREA

  C12.00

  Calculation script does not have C12.00 as the value for the variable substitution. If I give FY15 then Script gives me a correct syntax.

  Please help me to get this resolved.

  Thank you

  Shruti

  Hello

  Assuming that you calculate in the PRC. Database COR_ALL.

  You may set the C12.00 value in quotes like "C12.00".

  Kind regards

  Philip Hulsebosch.

• Using variables such as table names. Ideas for alternative designs

  Hello

  I am the design of an application that uses synonyms to pull information from the 'client' DBs via links from DB. Synonyms are created with a DB_ID in name (example: CUSTOMER_100, CUSTOMER_200... where the 100 and 200 are DB IDs of 2 separate DBs customer.)

  I have a procedure that selects data in the synonym based on what DB_ID is passed to the procedure. I want to be able to perform this procedure for any entered DB_ID. I know now I can't use variable for the table names names and using EXECUTE IMMEDIATE does not seem suitable for what I'm trying to do.

  Does anyone have suggestions or re-design options, I could use to achieve this generic procedure which will select a certain synonym based on the information of DB input parameters? Thank you.

  CREATE or REPLACE PROCEDURE CUSTOMER_TEST (p_host IN VARCHAR2, p_db_name IN VARCHAR2, p_schema in VARCHAR)

  IS

  v_hostname VARCHAR2 (50): = UPPER (p_host);

  v_instance VARCHAR2 (50): = UPPER (p_db_name);

  v_schema VARCHAR2 (50): = UPPER (p_schema);

  v_db_id NUMBER;

  v_synonym VARCHAR2 (50);

  CURSOR insert_customer

  IS

  SELECT

  c.customer_fname,

  c.customer_lname

  OF v_synonym_name c;

  BEGIN

  -MADE BASED ON INPUT PARAMETERS DB_ID

  Select d.db_id

  in v_db_id

  of t_mv_db_accounts ac.

  t_mv_db_instances I,.

  t_mv_dbs d,

  t_mv_hosts h

  where ac.db_ID = d.db_ID

  and i.db_ID = d.db_ID

  and i.HOST_ID = h.host_id

  and upper (H.HOST_NAME) = v_hostname

  and upper (D.DB_NAME) = v_instance

  and upper (Ac.ACCOUNT_NAME) = v_schema;

  -ADD DB_ID TO NAME SYNOYNM

  v_synonym: = 'CUSTOMER_ | v_db_id;

  FOR cust_rec IN insert_customer

  LOOP

  INSERT INTO CUSTOMER_RESULTS (First_Name, Last_Name)

  VALUES (cust_rec.customer_fname, cust_rec.customer_lname);

  END LOOP;

  COMMIT;

  END;

  /

  RGS,

  Rob

  EXECUTE IMMEDIATE ' INSERT IN CUSTOMER_RESULTS (First_Name, Last_Name) SELECT customer_fname, customer_lname FROM ' | v_synonym;

• Case function can be used as a parameter when calling a procedure, please advise...

  Case function can be used as a parameter when calling a procedure, please notify

  The daily procedure is called with the parameter 3 following one of the parameters using a function box between them as shown below.

  Daily_Ins (c1.p_mtrid, c1.p_UOM CASE WHEN "KWH" THEN 1 ELSIF 'KW' THEN 2 END, v_dateHold);

  In my opinion, using decode is illegal, so I think that I cannot say something like :

  Daily_Ins (c1.p_mtrid, ( decode c1.p_UOM, "KWH", 1 'KW', 2), v_dateHold);

  I think I just found something on the net

  SQL > DECLARE

  2 wages NUMBER: = 20000;

  3 employee_id NUMBER: 36325 =;

  4

  5 PROCEDURE give_bonus (emp_id in NUMBER, bonus_amt number) IS

  6 BEGIN

  7 DBMS_OUTPUT. Put_line (emp_id);

  8 DBMS_OUTPUT. Put_line (bonus_amt);

  9 END;

  10

  BEGIN 11

  12 give_bonus (employe_id,

  13 CASES

  14 salary when > = 10000 AND salary<=20000 then="">

  15. WHAT salary > 20000 AND salary<= 40000="" then="">

  16. WHAT > 40000 salary THEN 500

  17 0 OTHERWISE

  18 END);

  END 19;

  20.

  PL/SQL procedure successfully completed.