FlexConnect and Hello Gateway

Similar Questions

• How can I disable marketplace and sync and Hello on firefox

  I don't want to not sync can disable you the same thing with the market place and Hello.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  See also:
  Disable Hello, Pocket & drive +:

  • https://addons.Mozilla.org/firefox/addon/disable-Hello-Pocket-reader/

• Target subnet mask and the gateway in different subnets and clock error

  Hi all:

  Need help. I have a standalone PC operating a direct VI on a CFP with a crossover ethernet cable (developed on my laptop, compiled and installed as a standalone on the PC). When the VI runs on standalone PC version, everything works (click the button, analyzers are read), but the time being pulled from the CFP is wrong, and infact resets to December 1969, a default value. I am error checking, and no error is marked with the CFP, slaughter programmes. When I go to the MAX function, the time playing of the CFP is the funky time. Looking at the IP addresses, I generally use a very standard protocol (192.168.000.001 for the PC, 192.168.000.002 for the CFP currently running on the subnet for the pc and the PSC 255.255.255.000). However, when I apply this Protocol on the CFP through max, it gives the error "the subnet mask you entered puts the target and the entry door to different subnets." I am not versed enough well understand this, and what I read in 2 postings here, I tried to harmonize the IP numbers and the subnet, and they do not seem to help. When I put intentionally in false numbers IP or subnet default time synchronization time correct (pc), but functions block (as expected). It is certainly not an issue of PC zone.

  Anyone can offer any guidance?

  Currently runnig LV 8.2 with drivers of 2009. PSC 1804 with MAX 4.6.

  I appreciate all help.

  Best regards;

  GIS.

  OK, I solved it. FYI: for those who are not aware of the IP: IP of the host and default gateway server to the same value. My work for the host computer are 192.168.000.001 and subnet masks can stay 255.255.255.000. The CFP has been set to 198.162.000.002 with a 90.00.00.03 DNS. Time server has been blocked by the Norton 2009 Firewall (even with an exception) and thus the cruxt of this issue together. I had to uninstall completely from this "software". I hope this helps.

• can't make an external call with CuCM and H323 gateway

  Hi experts, I have a problem with CuCM and h323 Gateway. I use a 2811 router to make a gateway H323, CuCM server and Switch layer 2 build a VoIP LAB, this my network:

  

  and my router configuration:

  Current configuration: 2335 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  !

  No aaa new-model

  !

  !

  !

  dot11 syslog

  IP source-route

  !

  !

  IP cef

  DHCP excluded-address 192.168.1.1 IP 192.168.1.10

  !

  IP VOICE dhcp pool

  network 192.168.1.0 255.255.255.0

  option 150 ip 192.168.1.2

  default router 192.168.1.1

  !

  !

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  voip phone service

  h323 connections allow h323

  allow connections h323 to SIP

  allow connections sip h323

  allow sip to sip connections

  service additional h450.12

  Fax protocol cisco

  !

  !

  !

  vocal h323 class 1

  H225 timeout tcp establish 3

  !

  !

  !

  translation of the voice-rule 1

  rule 1 / ^ 9.

  !

  !

  voice translation-profile PSTN

  translate 1 called

  !

  !

  voice-card 0

  !

  !

  application

  Service flash aa1: its - cisco.2.0.2.0.tcl

  paramspace English language en

  paramspace English index 1

  Param aa-driver 0839959204

  paramspace location English flash:

  prefix English paramspace

  !

  !

  !

  Archives

  The config log

  hidekeys

  !

  !

  interface FastEthernet0/0

  IP 192.168.1.1 255.255.255.0

  automatic duplex

  automatic speed

  H323-gateway voip interface

  port of link voip H323-gateway 192.168.1.1

  !

  interface FastEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  IP forward-Protocol ND

  no ip address of the http server

  no ip http secure server

  !

  !

  !

  control plan

  !

  !

  !

  voice-port 0/0/0

  cover of the echo - cancel 32

  connection ERA opx 3100

  Description 08395959204

  activation of the caller ID

  !

  voice-port 1/0/0

  !

  voice-port 0/0/2

  !

  voice-port 0/0/3

  !

  !

  !

  1010 Dial-peer voice pots

  Service aa1

  incoming called number 08395959204

  direct line to inside

  port 0/0/0

  !

  voice pots Dial-peer 2020

  PSTN description

  translation-profile outgoing PSTN

  destination-model 9 t

  Setup progress_ind allow 3

  progress_ind enable progress 8

  port 0/0/0

  Forward-digits all the

  !

  Dial-peer voice 10 voip

  destination-model 1...

  Setup progress_ind allow 3

  progress_ind enable progress 8

  h323 voice-class 1

  session target ipv4:192.168.1.2

  DTMF-relay h245 alphanumeric

  Codec g711ulaw

  No vad

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  Cisco password

  opening of session

  !

  Scheduler allocate 20000 1000

  end

  I have configured the gateway h323 and attach files to router parttern on follow CUCM

  What is the problem and how to solve?

  Thanks for all the help.

  Your DP pointing CUCM is wrong, or your ÉRA OPX, depending on what you need.

  voice-port 0/0/0

  cover of the echo - cancel 32

  connection ERA opx 3100

  Description 08395959204

  activation of the caller ID

  Dial-peer voice 10 voip

  destination-model 1...

  Setup progress_ind allow 3

  progress_ind enable progress 8

  h323 voice-class 1

  session target ipv4:192.168.1.2

  DTMF-relay h245 alphanumeric

  Codec g711ulaw

  No vad

  Your DP is waiting for 1... and you send 3100, they must match.

  You might need to change the significantt numbers and entering CSS, but only you can know

  For outgoing, you are throwing 9 predot, but again, expect it in your RFP, again, change as you need.

  voice pots Dial-peer 2020

  PSTN description

  translation-profile outgoing PSTN

  destination-model 9 t

  Setup progress_ind allow 3

  progress_ind enable progress 8

  port 0/0/0

  Forward-digits all the

  You cannot transfer the numbers all send you also 9 for each call

  Change your configuration you want / need.

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• on heterogeneous Services of Oracle and Oracle Gateway

  Hi all
  
  
  I am very new at this, I want to know:
  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  (3) is there a step by step link to configure odbc to create dblink?
  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  
  Thank you very much for your help
  
  Concerning
  
  JOE

  Joe,
  Let the copy/paste your questions and comments online:

  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  Let me first clarify one thing, heterogeneous services is the generic mechanism in the database Oracle used by all gateways. The product you are talking about is database for ODBC bridge or the bridge of Sybase database.
  Database for ODBC bridge is available for Linux and Windows. It is the free product that does not require a license of Oracle. The license is included in your license data. It's a generic gateway which allows you to connect with any suitable part 3 ODBC driver to a corresponding foreign database. As this is a generic connectivity what words connect to real data, but also to MS Excel or text files as long as you have an appropriate ODBC, capacity driver is very limited.
  More powerful bridge is the bridge of Sybase database. It covers the same functionality as DG4ODBC but it also allows you to work with distributed transactions, you can call procedures stored remote Sybase etc.. This gateway is design for Sybase ASE connections, so it is also able to map some Oracle Sybase equivalent functions. This gateway for Sybase database is NOT free, it requires an additional license.

  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  It depends on your preferences. Two entry doors are available for Linux and Windows. When you use DG4ODBC, you must only be careful that you get a suitable 3rd party ODBC driver for this platform with the size of the corresponding word (64 bits for 64-bit DG4ODBC and 32-bit ODBC driver for DG4ODBC installations on 32-bit platforms).
  The latest version of the software is currently 11.2.0.3 and it can be downloaded (and installed from scratch) of "My Oracle Support". Simply open the patches & updates section, look for Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER and make sure you choose the platform you want to use. Then check out the readme file it lists, which of these download CD contains the gateway software.
  BTW, the CD contains DG4ODBC and DG4SYBS and it is up to you to decide during installation of which product you want to use.

  (3) is there a step by step link to configure odbc to create dblink?
  Installation of the ODBC driver is different from one provider to another, and from platform to platform - so we didn't not a note specifies how to configure the ODBC driver. This kind of question is best managed by the provider of the ODBC driver.
  Regarding the implementation of DG4ODBC on Windows, you will find the appropriate information in the knowledge base on My Oracle Support. Just look:
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 32-bit Windows to connect to Oracle databases Post Install [466225.1 Document]

  and to DG4SYBS:
  How to set up DG4SYBS (Oracle to Sybase database entry door) on 64-bit Unix (AIX, HP - UX Itanium, Linux and Solaris) Post Install [437696.1 Document]
  How the installer DG4SYBS (bridge of Sybase database) on a 64-bit Windows [Document 1319852.1]

  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  It really depends on your needs. DG4SYBS is sullen more easy to install because this gateway comes with everything you need and you don't have to find an appropriate ODBC driver or get the working ODBC driver. It is also more powerful as you can for example use triggers that replicate changes to data in an Oracle database on the Sybase database in the same transaction. When you want to call Sybase stored procedures, you can also do this with DG4SYBS. So it really depends on your needs.

  -Klaus

• NSX - Ping issues between DLR and edge gateway on the network of public transport

  Hello

  I have deployed an NSX in a POC environment and have a few weird questions. I sent a distributed router (DLR) with 2 internal interfaces (related to the segments of NW app & web) and an uplink interface connected to a network of transit (192.168.10.0/29). I have also deployed a gateway of Edge services with an internal link connected to the same interface of transit (192.168.10.0/29) and an interface of uplink connected to the outside world.

  The question is, when I PuTTY on the Edge service gateway and ping interface uplink of the DLR using sound transit (192.168.10.2) network ip address, I do not get a response. The firewall is configured to accept all traffic on the DLR and the edge.

  Someone at - it ideas? Note that the DLR has been configured default gateway pointing to the IP of the gateway of the Edge on the network of public transport (as is the only North DLR connection)

  See you soon

  A rough drawing of the topology is attached. Ping fails to 192.168.10.1 to 192.168.10.2

  FYI - has proved to be a problem with the NSX 6.1.2 that attaches to 6.1.3. No KB for the issue for the time being, nor is he mentioned as being fixed at 6.1.3 in the notes but VMware engineer GSS confirmed that its fixed.

  temporary work is about to stop and start the daemon netcpa on the compute cluster hosts & edge of ESXi

  See more details on my blog http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/

• Privillage DBA for the user of the AQ and message Gateway users

  Hello

  We have this user who has the queues waiting for the Oracle and also 3 more users for Oracle Gateway of Message.

  Please can someone explain why they need the privillage DBA? What will happen if revoke us the ADMINISTRATOR of them?

  Thanks in advance!

  Hello

  in principle, you need the following DB diagrams:

  (1) MGW_ADMIN + MGW_AGENT (for Oracle Message Gateway)

  (2) the user of application (for Oracle AQs) schema

  All necessary admin tasks about the gateway messages will be made using the first two schemes.

  The grants will be be defined according to standard install MGW scripts. Here no DBA privileges will be granted.

  Regarding your application schema user without DBA privileges are required to create and modify the AQs.

  For such a scheme, the following basic subsidies are necessary:

  GRANT EXECUTE ON dbms_aqadm to ;

  GRANT EXECUTE ON dbms_aq to ;

  GRANT AQ_ADMINISTRATOR_ROLE to ;

  > What will happen if revoke us the ADMINISTRATOR of them?

  In general, don't happen if you revoke the role DBA to a 'normal' QA owner

  Kind regards

  WoG

• vSphere 5, vCSA, View Manager and Secure Gateway

  Hello world

  I need some advice...

  
  

  A new vSphere infrastructure situation 5:

  3 HP Proliant server, each connected via iSCSI to external storage
  VMware vSphere Essentials Plus Kit 5 (used for the server VM) main virtualization infrastructure
  VMware View 5 first add-on for virtualizing a desktop machine
  approx. 20 VM server
  approx. 10 desktop VM
  My questions:
  for the vCenter, I thought to use vCenter Server Appliance (vCSA) which can be used up to 5 host and VM 50,
  but for the View Manager manage the office machine, what should I use?
  There is also a View Manager device?
  Or I need to install it on a separate Windows 2008 Server?
  Need to be a member of the Windows domain?
  And for the VMware Secure Gateway ?
  There is a device or must be installed on a separate Windows 2008 Server?
  When he used the vCSA, you must have a domain on the network controller?
  Thanks for your reply guys

  No.... the vCenter and view managed use 'ADAM' which is AD in user mode and is not compatible with an AD domain controller.

  You need at least 3 Server Wiindows (DC 1 AD + DNS + DHCP, 1 vCenter + music, 1 View Manager)

• RVO42 and Layer Gateway Application SIP-can it be disabled?

  We use a phone system requiring a layer gateway Application SIP should be disabled on the router.  We have replaced former RVO42 routers with the WRVS4400N router and VOIP phone works very well with this option unchecked checkmark.

  The new router RVO42 allows to disable this option?  I did find it in the manual to date.  I don't want to buy two routers and find that it won't work with the telephone system.  We have Dual WAN this time so I thought that we would try RVO42 model again as long as it is the most recent version.

  Someone had problems with the RV042, RVO82 new with VOIP NEC phone systems?

  Thanks for any help.

  RV042/RV082 does not support SIP ALG, so no conifguration option to disable.

• B2B and XML Gateway

  Hi all
  
  Can someone please explain/point me to the use case for XML gateways. I'm a bit confused as the use of XML gateways and when the user the SOA Suite 11 g B2B etc.? We have an AIA 11 g on top of SOA Suite 11 g and are looking forward to expose some of the webservices through the firewall.
  
  Concerning
  Anish.

  XML Gateway is a component of Oracle (Oracle E-Business Suite) applications which is used to send and receive the OAG XML compliant. Earlier, it was used for communication of direct partner as well but now Oracle B2B, being a dedicated B2B product and support for all protocols including EDI document, OAG, RNIF etc, is used for the communication partner and management of the agreement.

  You understand the flow-

  Outside world <=>B2B <=>SOA <=Apps adapter="">Oracle EBS (XML Gateway)

  You can display XML Gateway to research in the EBiz forum - related

  EBS general discussion

  Kind regards
  Anuj

• Firefox beta and Hello video chat

  I downloaded the beta version of Firefox on my Kindle fire HD, but I see around here to go to the chat icon. Is it because it is not comparable with the Kindle?

  What about John

  Hi John, currently the conversation must be initiated by a user of office - but if you have a call link you can also take part in a call via firefox on android...

• WLC5508 problem with dhcp and flexconnect local switching

  Hello
  I have a new WLC 5508 with firmware 8.0.133.0 (suggested one right now) and I'm trying to set up a WLAN with flexconnect and local switching, but when I try to connect a client it is not getting an IP address.

  Here's what I did:
  -put the AP mode flexconnect
  -support vlan in the AP has allowed
  -local switching license and only in wlan
  -spread the vlan from AP to the local gateway
  -put the IP helper on local and pointed the wlc management ip gateway
  -set up a scope for the vlan Server dhcp internal WLC
  -set up a working group with the vlan-wlan association flexconnect

  Here is what I checked:
  -l'AP obtains an IP address in dhcp in the vlan, and a lease for that appear in the DHCP Server internal to the WLC
  -If I put the interface vlan on a switch in DHCP it gets the ip address of the same way
  -If I set the static IP address in the wireless client it ping the local gateway and navigate normally
  -J' tried the deactivation/activation proxy DHCP in the management connected to the WLAN interface, but nothing happened
  -J' tried Central DHCP activation of treatment with no luck

  It seems a dhcpdump on the wireless client client ask for an IP address, but get no response, as if it were the DHCP request is be filtered or diverted somehow.

  All you other ideas?

  DHCP on the controller is not a real dhcp server, see it that way. The management interface is used when defining aid ip and proxy dhcp must be enabled for internal dhcp. In your configuration, dhcp only works for the AP and should not work for any cable customer. You should be able to use the IP helper pointing to your WLC management interface but also make sure that you create an interface on the WLC for the local subnet and assign the interface to a correct address, even if it is not actually using it. Then in the new dynamic interface of this local subnet, you create, make sure that the primary dhcp is the ip address of the controller management. I think it works.

  I would really use a true if possible dhcp server or even put a dhcp scope on the interface of L3 on the production site.

  -Scott

  Please evaluate the useful messages *.

• Best practices to configure NLB for Secure Gateway and Web access

  Hi team,

  I'm vworksapce the facility and looking for guidance on best practices on NLB with webaccess and secure gateway. My hosted environment is Hyper-v 2012R2

  My first request is it must be configure NLB, firstly that the role of set up or vice versa.

  do we not have any document of best practice to configure NLB with 2 node web access server.

  Hello

  This video series has been created for 7.5 and 2008r2 but must still be valid for what you are doing today:

  https://support.software.Dell.com/vWorkspace/KB/87780

  Thank you, Andrew.

• 7900 and inherited on 10.5 CUCM gateway telephone support

  Hello

  My client is the migration of CUCM 7.1.5 until 10.5 CUCM. In my view, that a direct upgrade is possible. They have several 7911, 7941 and 7921 phones running on CUCM 7. They will build on CUCM 10.5? In addition, there voice gateways are 2811 and 3825 routers running IOS ip voice and spservices 124. These inherited gateways are supported in CUCM10.5. They function as gateways H323 and MGCP with SRST 1 gateway. I do need to update their IOS 15

  Thank you
  Derek

  Hi Derek,.

  7941 is fully compatible with 10.5 CUCM, 7911/21 can still be used with version 10.5, although there is no minimum firmware recommended for the same. 28XX and 3825 gateways, minimum 15.1 (4) IOS M7 is '' recommended '', no matter what lower firmware also works, but you can't get the other bug fixes and features of the new IOS with new version of cucm. Please see the following link for more details

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/uc_system/unified/com...

  HTH

  Manish

• Change default and the vMA gateway subnet mask

  We have made some changes to our network and vMA is the last to receive the new subnet mask and default gateway.  Can someone tell me how to change these details?  I did stuff like that on many linux boxes, but none of the methods have worked so far on this machine.

  Hello

  in vMA 4.1, you can modify in the file

  /etc/sysconfig/network-scripts/ifcfg-eth0
  

  and make a

  service network restart
  

  After.

  in vMA 5 you can change this through the vSphere Client console or via the web interface of the vMA.

  Concerning