USRP-2921 not detected by my laptop

Similar Questions

• HP USB Flash Drive v155w not detected by my laptop

  Hello

  Help, please.

  I bought a HP USB Flash Drive (16GB) v155w but now it is not detected by my laptop. Dell XPS M140. It runs on OS WINDOWS XP (Media Center). can you suggest a way out.

  Thank you.

  Also, I have same problem and discovered that I inserted the USB key wrongly, just try to insert it by reversing the trend which solve the problem in my case.

• Device unidentified USRP 2921 (not listed is not in the utility of Configuration of NOR-USRP)

  I connected with my PC (ethernet end) NI USRP 2921. I'm trying to use it with Labview 2015 64 Bit/2013 32 Bit. I also installed the driver NI USRP 15.0
  My USRP powered on correctly. It is also detected by my PC, but it does not identify its USRP and rest unidentified network.

  It does not appear in the NI USRP configuration utility.
  I also put a static IP address for my computer.
  Kindly help.

  Hi lmdadinho,

  Since your 2921 USRP powered and is detected, this looks like a problem of network as a problem with the 2921 more of himself. The Getting Started Guide (http://www.ni.com/pdf/manuals/376358a.pdf) has some network troubleshooting to try, beginning on page 12. This could be a good starting point.

  Best,

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SD/HC cards not detected on my laptop Acer X54C with the Windows 7 operating system

  I used to be able to read cards SD/HC 16 gig on my Acer X54C not lately. I use a Sony stick in the same location, but not my SD cards which can do? I reinstalled the drivers for ACER with no luck.  As a professional photographer, I can not load my pictures, Marty...

  Original title: seven stop reading my SD/HC cards on my acer laptop computer x54c. I have re-installed drivers from Acer. no luck

  I suggest that you try to update the BIOS of https://www.asus.com/Notebooks_Ultrabooks/X54C/#support_Download and ask ASUS if the problem is not resolved.

  Your problem is with the drivers, not ASUS hardware or Windows.

• the integrated webcam is not detected on my laptop?

  Help!

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the system manufacturer's support, online documentation and drivers (update or reinstall),
  and their forums (if any).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• speakers not detected on the laptop after relacing hard drive

  I am running windows 7 ultimate, my computer is a HPdv4-1427, my hard drive has been replaced by a computer repair technician, before repair speakers worked well, I had to reload my OS after replacing my hard drive.

  There is probably a multitude of hardware drivers you need to install, including the drivers for your audio hardware. You can check this in the Device Manager (start-run, type devmgmt.msc and press enter). You will probably see a bunch of "Other devices" and/or devices listed with an exclamation point (!).

  Research on the HP site which leads me to suspect that you have mistyped the model number of your CV. But if you visit the HP website for your region, you should be able to see a "Support and drivers" link near the top of the page. Choose your model and search for the drivers. Install drivers chipset first, then the other missing drivers afterwards.

  For more assistance, please check the model number and advise us.

  Tricky

• HP ENVY notebook: Headphones not detected on HP ENVY laptop

  Headset/headphones not detected by the laptop when it is inserted into the audio jack.

  tried several headphones which none were detected despite working on other devices.

  USB headset is detected.

  Have updated audio drivers using HP support Assistant and manually and not always no chance.

  Had this problem because the laptop has arrived.

  Any help much appreciated and I will try to provide all other necessary details.

  Hey @ABONKERSCHICKEN,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with headphones not detected on HP Envy laptop. I'd be happy to help you with that.

  To begin, I would like to follow this document: computers HP - solve the headphones and headset problems

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• IPhone 6 is not detected by the Pc and itunes...

  I'm suffering from a strange problem, my iphone 6 is not detected by my laptop or even itunes, but its loading... I'm trying to connect to my old iphone 5 and 6 and its works very well...

  Could you please help me on what I can do with this phone, I already searched a lot and try every thing like restarting the laptop etc etc, but nothing works at all...

  Appreciated your kind reply...

  It may depend on your OS of the computer. What computer OS do you use? The latest version of iTunes works with some versions of OS X. either way, you can see this support document. If iTunes does not your iPad, iPhone or iPod - Apple Support

• HARD drive not detected in the BIOS on Satellite A215

  Hi all

  I could use to solve this problem: bought this laptop computer without a disk of the auction. Installed again 2.5 inches HDD SATA 250 GB, which was not detected in BIOS and also not detected when using a MS Vista installation disc. When trying to install Vista, get a message no drive seen HARD and demand for pilots.
  I flashed the BIOS with version (2.0) of lates without problem through the CD drive, but still no detection of HARD drive.

  The drive partitioned and formatted NTFS without problem by using another computer and USB SATA adapter using the command line method. Just for additional verification, I went on the new HARD drive to an extra 2.5 "SATA HDD used for backups, but that the HARD drive has also not been detected.

  It is not a "compatibility" option in CMOS to select SATA or Auto, etc..
  There is not a second HDD, so this isn't a question of slave/primary. There are no jumpers on the new HARD drive.
  Set the CMOS settings 'by default' does not solve the problem.

  The SATA connectors on the HARD drive and laptop computer are in perfect condition.
  Also, the drive is not detected on the laptop connected via USB to SATA Adapter, but of course there is no OS installed to support this connection.

  In any case, I just can't come up with any more ideas to try.
  Any suggestions would be really appreciated!

  Best,
  Glenn

  Hello

  The BIOS should recognize the HARD disk even if the SATA mode would be compatible or AHCI. This should not affect the recognition of the HARD drive.

  You said that you have tested the condition of the HARD drive and it's ok, so I guess that it s no disc HARD question.
  Hmm, you could try to format the HARD drive once more and then connect the portable computer HARD drive.

  Another idea: Remove/Disconnect the CD/DVD drive and then connect the HARD drive to the SATA connector.
  If it does not, then I recommend to test another HARD drive, otherwise if the new HARD drive would not work, then a SATA controller may be defective.

• HP Probook 450 G1: Windows 8 HP recovery disks has not detected

  Hello

  In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

  If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

  I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

  I hope you got my problem.

  Product number: F6B14PA #ACJ

  Thank you

  Hello

  Thanks for posting in the HP Support forum.

  Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

  I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

  To be honest, I don't know why it is not detected, but there are some things you can try:

  -Boot in the BIOS and disable secure boot + turn on Legacy mode

  Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

  Details > > http://support.hp.com/us-en/document/c03653226

  -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

  keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

  I would like to know if it works for you.

• 15 d 103tx lan wifi not detected on win7 64-bit

  Dear experts
  I installed win7(64bit) on 15d103tx... but the wireless lan is not detected by the laptop... when I checked in network adapters, there were only two bluetooth device it... wifi is also available in nt

  See if they work...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_123851_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_131406_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If those who do not work either, so unfortunately, I won't be able to help you with this issue than one of these sets of pilots must have worked.

• Windows Media Center TV tuner not detected

  My current operating system is Windows Vista Home Premium Service Pack 2
  (I installed SP2 from microsoft.com)
  I have the Version of the Windows Media Center - Windows Vista 6.0.6002.18030 software (vistasp2_gdr.090429 - 2357).  I'm trying to watch TV on my laptop.  I have Windows Media Center and am confused about the version because I saw this - if the version number is 6.0.6001.18000, you are NOT running Windows Media Center TV Pack.  You are running the version of Windows Media Center, which is included in Windows Vista or in Windows Vista SP1.
   
  As you can see my version (numbers) are alittle different on the end, also the info in parentheses (vistasp2_gdr.090429 - 2357) I don't know what that means.  When I tried to configure the tv signal in Windows Media Center, I was told: the TV signal cannot be configured because no tv tuner hardware was detected. So, how can I find out if there is an internal tv tuner installed and everything is not detected?  My laptop is new - 3 weeks, and I think that all the drivers are current.   While they inspected the help windows vista hardware compatibility list for 64-bit vista tv tuners, I was flooded for more information that I knew what to do with.  I'm obviously not a computer genius and will never be.  I'm open to suggestions.  I just need to know what I have to do to be able to watch TV on my laptop.  Any help will be appreciated! Thank you.

  Hello

  Thanks for choosing Windows Vista Forums.

  I recommend you contact the manufacturer of your computer to check for the presence of a TV tuner.

  All Vista computers are delivered with the same version of Windows Media Center.

  Here is a link below for compatibility with Windows Vista Hardware.  Please let us know status.

  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx

  How to use Windows Media Center on a Windows Vista-based computer to watch, pause and record live TV

  http://support.Microsoft.com/kb/942375

  Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

  Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  If you experience problems with your TV tuner card, I suggest you go to the Web site of the manufacturer for the software updates and technical support.
  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP envy j110tx: my flash drive does not detect in the hp j110tx start menu

  When I m trying to install windows usb 8.1, my USB is not detecting in my laptop boot menu like j110tx.

  But detects the USB even in my pc another and it contains the bootable file and it is lodable too

  I've looked everywhere but I have nothing, so please help me

  Hello:

  You have created Windows 8 or 8.1 Installation USB Flash Drive with UEFI?
  http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows-8-a.html

  http://www.eightforums.com/tutorials/15458-UEFI-bootable-USB-flash-drive-create-Windows.html

  Concerning

  Visruth

• I7 X 220 does not detect MyDigitalSSD SandForce based msata

  I have a map of msata mydigitalssd that I just got and it is not detected in my laptop.  It's the smart series 256Go with sandforce controller.  the laptop is the model 4286cto with the i7 CPU and usb 3.0.  I worked with mydigitaldiscount and continues to work with them, but until I want to see if anyone else has had a similar problem or has any ideas.  I got so far with good interactions with them and their support.

  I updated and downgraded firmware of different times, 1.31 to 1.19 and I am currently on 1.28.  I did it because I know the X 220 with the i7 used to have problems with msata which has been fixed in bios 1.18.   the msata card has 2 led to this topic, both light up momentarily at the start, then one of them remains solid on blue after that.  The bios does not detect anything for this device.  If I'm going to start diagnosis screen it does not detect it, if I hit f12 for the Boot Manager I do not see the msata ssd.  If I go into windows Device Manager I don't see the ssd.  If I do an lspci under linux, that I do not see the ssd, if I do a fdisk - l, I see, not more than I see in the dmesg.

  MyDigitalDiscount was large and cross shipped a replacement for me right now, they got my old back and tested and said: it worked fine, a new shows exactly the same problem and they tested before shipment.

  I'm at the end of my rope here.  I'm thinking the ssd is not compatible with the laptop (port of the bios/msata), I have a slot msata hard or I'm half delayed and missing something completely obvious.

  I took a wwan card and plugged into the laptop of my worklaptop and it detected it and came as being on the black list (which is good that at least he detected something).  I know that's not final, mpcie work does not necessarily mean an msata work, but I think it's a good sign.

  I do it for a long time and I like to think I'm pretty good in this, however I've never used a map before msata and admit that I could be missing something, I don't know what.

  UPDATE: solved!

  She was a bad mother.  The msata ssd works perfectly now that I got the replaced planar.