utility maintenance of WMI performance reverse adapter stopped working

Similar Questions

• 'WMI Performance Reverse Adapter has stopped working ".

  I am running Vista Home Premium 64-bit, and this error has occurred from time to time during the last 48 hours. Nothing seems to rush the error dialog box is displayed, I erase it and I return to work.

  Event Viewer log shows an error of 1000 with the following data:

  Failing application WmiApSrv.exe, version 6.0.6002.18005, time stamp 0x49e02765, failed module wmiprov.dll, version 6.0.6002.18005, time stamp 0x49e042a1, exception 0xc0000005, offset error 0x0000000000021cf1, process 0x1e80 id code, start the application time 0x01cf490df7d8f920.

  Several web searches have turned up nothing on how to solve it. All Windows updates have been applied; PC has been restarted after each.

  Anyone can shed some light?

  Hello

  The WMI Performance Adapter (wmiApSrv) service provides information of suppliers of Windows Management Instrumentation (WMI) performance library to clients on the network. This service runs only when the Performance Data Helper is activated.

  This service is installed by default, and its startup type is manual. When started in the default configuration, it connects by using the Local System account.

  When the issue occurred?

  Can you associate it with software or hardware changes?

  You attend a BSOD with the question (blue screen errors)?

  Disconnect devices, keep doing what you are doing and to see if the error occurs

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following command to determine if the malware has invaded the system.  Run a full scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Start > type CMD

  Right click on CMD and select run as administrator

  Type SFC/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  When you are finished, run chkdsk in the command prompt window

  Type chkdsk /F /R

  Press enter

  You will receive a message that the volume must be locked and you want to start research on reboot.  Press y and press enter

  Reset for the scan at startup

  This analysis takes longer than the System File Checker

  When finished, continue as before to determine if the problem persists.

  You can also try to solve the problem using the clean boot

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Remember to restore the normal startup system when finished.

• X 61: wireless adapter stopped working at home, work at the office...

  It's the strangest thing. Last night my (Intel Pro Wireless 3945ABG) wireless adapter stopped working at home - I can view all the networks and try to connect but it won't just end connections to one of the networks I could use in the past (my own password protected network or those open).

  Curiously, he does not work in my office, connect to our society, protected wireless network password.

  I tried to uninstall the drivers as well as access to the connections and install the latest drivers - but in vain.

  Help, please!

  Moderator Note: type added to the subject line.

  I don't know if it was AC 5.2 or not (because I just realized that the networks in question were not accessible on my iPhone either) - so I reset my router again and now everything is good.

  Thank you!

• WMI Provider Host has stopped working and was closed

  Using Vista SP2

  Only recalled recently by updates to Adobe Reader and updates Windows security up to and including April 15. About a week ago, I started getting error messages appear that State:

  "Microsoft Windows

  WMI Provider Host has stopped working and was closed.

  A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  When you click on 'Close' , another small window opens on the bottom tray, and when you click on it for more information it opens help and discusses 'Data Execution Prevention'. I have not changed my Data Execution Prevention settings.

  I stopped several times and the problem continues to exist. Delete the messages and that they recur usually every 10 minutes. This problem seems more common with open Facebook.

  Can anyone tell what changed to cause this start happening and I have to do to remedy this?

  Hello world

  You can determine exactly what causes most of the problems by following the steps below:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Digital AV adapter stopped working lightning

  has anyone a reason why my lightning Digital av adapter has stopped working?

  If so, what the remedy would be to make it work?

  Only suggestion I can offer is take it back to the Apple Store and I hope that they replace it.

  If it's any consolation, take a look at the comments here, many similar questions.

  http://www.Apple.com/shop/reviews/MD826AM/A/lightning-Digital-AV-adapter?page=0 & rf = 1

• WMI Provider Host has stopped working

  Why I am getting this message and what I can do about it?  Influence my computer somehow

  Hi BarbaraPoulin,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the steps below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the article in the Knowledge Base Microsoft for more information:

  The WMI provider host program may stop responding when you run a program that uses the WMI provider files offline on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935553

  Hope this information helps.

• Pavilion m7360y: RADEON X 600 series WDDM adapter stopped working

  For the past six weeks, using the Microsoft adapter Radeon X 600 series WDDM recommened, it's do not load properly & put my screen standby & causing 'hang up' or just crash my computer. I paid Microsoft $99 to solve this problem, if I had a suspicious virus there. They cannot get my computer to work with the Standard VGA Graphics Adapter installed instead of my original series adapter Raden X 600. Now, I can't Google Earth to run or detect my TV VIZIO screen to view videos of U Yube on my TV through my computer.

  Do I have a hardware or software problem? Do you have a recommendation to determine where my problem is in my computer HP?

  At any time.

  I am pleased to have been of assistance.

  Most likely, a replacement of the video card will do.

  There must be something really wrong with the motherboard do not allow a new video card work.

• BSOD wmi provider host has stopped working

  Get the message and then a blue screen.

  Hello

  You can troubleshoot the bluescreens yourself using the methods in my reply in this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/8cd8362e-7d06-46FB-afd7-84d54b6a8ea7

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can't open some programs and also what indicating computer it is said GfxUI has stopped working. do what Mathilde?

  I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?

  Hi, Rosemary,

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.

  If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07.  If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.

  I hope this helps.  If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.

  Good luck!

• After the error message with computer-media center Scheduler etc has stopped working

  Original title: 8 boxes

  On separate cards on top of each other - they look like maps of correspondence-is this news centre Media State media stopped services aggregator, the drawer module igfx has

  order, hkcmd module has ceased, HD audio Panel has stopped working, Task Scheduler engine stopped working, a persistence module

  stopped working, sink to receive asynchronous callbacks for WMI client applications has stopped working.  They appear after the computer was during one

  While using the Internet, Facebook, please help.

  Hi sue them.

  ·         Did you do changes on the computer before the show?

  ·         Exactly when you receive the following errors?

  ·         What web browser do you use?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to start in safe mode with network and check if the similar problem occurs in safe mode.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Display map ati radeon stop work pavilion dv3 4122 tx

  Laptop Pavilion dv3 4122 tx

  operationg system, windows 7 64 bit

  8 GB Ram

  CPU i7 740 q

  Systematically, I got the message, DISPLAY ADAPTER STOP WORKING, AND RECOVERY OF A SERIOUS MISTAKE, in the end, the video card is not so I had to replace the motherboard for laptop, just after 1 year and a half, my warranty was expired of course, so it was replacing a high price, but now still under the sole warranty of 90 days for the replacement yet I'm having the same problem, I'm really interested in this subject, it means maybe I should replace card mother any yearany the help much appreciated,

  Here is the description of cases

  Name: Pedro George Chica

  Date: October 2, 2012

  Case No.: 4682748994

  Serial number: {removed privacy}

  Product no.: XV717PA

  Failure: Symptomworm heating, vga failed, missing display

  Headquartered in Bangkok. Phone + 66 2637-5899

  I think that something could be done better, I even I never play the game on this laptop, I just help for recording music.

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• _ "Boot Performance Monitoring" and "stop Performance Monitoring. __

  I just looked to the top of the page "Event Viewer" and discovered 1 791 itemsmarked as 'endangered', 'Critical', 'Error', etc, etc, etc.!
  They seem to be linked to "Boot Performance Monitoring" and "Stop Performance Monitoring", etc., etc., etc..!
  How can I fix all of these issues, please?
  I have a little trouble with my home computer private.
  Whenever I turn on my PC, it takes a long time to start (is that what you call "Booting"?).
  Also, when I want to turn my PC off, it takes a long time to close.
  I tried a few computer maintenance such as: -.
  CLEANING DISC,
  THE FRAGMENTATION OF THE DISK,
  etc.,.
  but they have not alleviated the problems at all.
  Can someone help me with this please?
  Any assistance, information, suggestions, etc. would be greatly appreciated.
  Thanks !
  
  Alan Merrington
  E-mail address is removed from the privacy *.

  Hello

  Normally how long will it take to start a power off of the State? How long does take for
  Stop for a shutdown of the State?

  Use this simple free utility to read these events and it makes it easier to paste them into one
  message here. Do these after the SFC and CheckDisk as below.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ==========================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  Keep these practice to check possible error messages if they return.

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain