'WMI Performance Reverse Adapter has stopped working ".

Similar Questions

• utility maintenance of WMI performance reverse adapter stopped working

  Hi uses a del latitude d630 in a windows vista enterprise with Service pack 2, with a 32 bit OS. I began to experience problems with the display of the ISE where the screen would be fricker and sometimes freez, the computer become very slow, especially in starting up and the pleasure to move high-speed uneven.

  I updated the bios to A17 and Nvidia drivers by using updates of windows for NVIDIA Quadro NVS 135 M. I also disabled most services running.

  It worked for a while (1 day) and cam problem up again, I have a screen dimmed now and the 'wmi performance reverse adapter stopped utility maintenance work' keeps poping up on the screen. I searched on several forums and no seems to give the solution please help me on this it worked for a while.

  I also opted to restore to an earlier date, but the sooner after 5 days, which gives the systemrestore is still at the time I was experiencing the problem. I'm looking for the solution to this threat.

  Concerning

  Hi Munaua,

  Your question of Windows vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows vista forum.

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/threads

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?

• Satellite C665 - Ethernet adapter has stopped working

  Hello
  A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

  When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
  I tried to restore the windows settings, but that didn't work.

  Can someone help me?

  It is possible that the LAN module is defective.
  All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

  I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
  What do you think of this?

• Lightning network adapter has stopped working

  Hello

  All of a sudden, my (original Apple) map network Thunderbolt has stopped working. I'm looking for advice to get it working again without reinstalling. This is the second time in 6 months that it happened, and the last time a reformatting it fixed and restore my entire user account does not restore the problem, so all signs point to something in the heart of the system and not "userland".

  Why I know that the adapter is not the problem:

  -Adapters two colleagues also do not work

  -Adapter works very well in recovery, but not once started

  What happens when I plug:

  -Lights led network switch, so a link is established

  -L' adapter remains 'red' in the network settings

  -dmesg shows:

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 1 disconnect = 0

  [Start of PCI configuration]

  [End of PCI, bridges 14, 15 devices configuration]

  No obvious signs of problems.

  Steps taken to solve the problems:

  -If I delete the card of network settings, I can never add again; He simply never shown even if it is plugged in and the link light is on the switch.

  -Crushed/Library/Preferences/SystemConfiguration and restarted. Always impossible to add the interface, as mentioned above, it never appears.

  At this point, I am of ideas. Any help would be greatly appreciated.

  Thank you!

  Figured it out... it's driver Linksys USB3GIG crap that breaks the kext IONetworking signature.

  ERROR: invalid signature for com.apple.iokit.IONetworkingFamily, does not load

  After removing AppleRTL815 * from /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/ and restart, thunderbolt ethernet is back

• Adapter has stopped working

  I bought a second hand probook6460b, can I still get a replacement for the adapter?

  Hello:

  Yes you can.

  You need:

  AC adapter power slim (65 watts) Smart - with power factor Correction (PFC) - requires separate cord 3 supply with C5 connector wires.   HP part # 609939-001

  If you always use the power cord from the wall jack to the card, you will not need to buy.

  You can order online at the link below.

  http://h20141.www2.HP.com/hpparts/CountryChoice.aspx

• my laptop crashes and tells me my network adapter has stopped working. How can I fix it?

  anyone else having this prob? its also saying the driver on my vista version is compatible... what that all about?

  Update your network adapter drivers. You won't get them from site of the computer laptop mftr... First uninstall the 'old'. MS - MVP - Elephant Boy computers - don't panic!

• Why my wireless adapter has stop working on my brand new hp pavilion g7-1338dx.

  I ran the wizard network without success and reset my router several times. When I get it to connect, it will stay connected until I stopped. Then when I turn on the computer the next time it doesn, t want yo connect.

  It, s a new brand Paviloion HP g7-1338dx running Windows 7 Premium Home Edition.

  If you need more information, let me know!

  I appreciate all your advice, but I've had a lot a more simple solution. Got a new router from AT & T and Walla, no more problems.

  The only thing I can think to problems with my old router that supported 8032.11 a, b and the new router that supports 802. 11A, through 802.11 g

  Maybe it was the difference in the Protocol of security between the two and try to pass between the two.

• Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

  Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

  My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

  Anyone else see this behavior?

  Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

  BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

  So far, all the stuff has failed. And now I will notify again before the update.

• My computer keep saying windows has stopped working

  My computer keep saying windows has stopped working. What can I do to solve the problem?

  Hello

  1. for how long are you facing this problem?

  2. did you of recent changes made to your computer?

  3. what operating system you run on your computer?

  I suggest that you perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• "Windows Explorer has stopped working / windows restart" happens in a loop.

  System is not yet able to run as administrator / cmd.exe file. "Run" is not recognized as a builtin or external operable program or batch file. What should do?

  Hello

  This error most often occurs due to some third party application conflicts. Have you tried the steps in the sticky provided above?

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Windows Explorer has stopped working windows is collecting more information about the windows problem restarts what is the fix

  Is not allowing me to access my computer, don't constantly message restarts message windows.   Process is underway, need help.  I loged as a guest on the computer problem not if badly - however, it does not go to all the pages and begins to have a similar message to say windows cannot open this page, even if it often is in the page and it stops.

  a response would be email to me - thanks

  Hello

  1 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Important: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Reference link:

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• Windows Vista - Windows Explorer has stopped working :(

  From the start of the base, I then selected each program one by one and then restarted the computer. I thought that if I disabled it "Windows Audio Endpoint Builder" and "Windows Audio", the problem stops... anyone... anyone? Flight Simulator is not the same without her lol...

  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.  Good luck.
  -

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• After you download Internet Explorer 9, Windows Explorer has stopped working Vista

  I downloaded ie9 for a windows update. Since this update my windows Explorer has stop working. I can't use any of my popup windows they will display the error message, restart. is there a solution?

  * original title - after download IE9, Windows Explorer has stopped working. Why did I get this error message? is there a solution? business of vista with all the updates.*

  Hi gdd6,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-Explorer-has-stopped-working-Windows-is/8607105e-5ff5-4B3A-8591-a9258798ff75

  I hope this helps!