v125W 16 GB USB Flash Drive reporting disk full when moving some files

Similar Questions

• NSLU2 claims drive is full when moving large files

  Hi all.

  I just got my Nslu2 today as its going to beput to use to share multimedia files in the home network. I currently put it in place with a Seagate free agent desk top of page hard drive 500 GB and a sky netgear router. I currently have the Firmware Version: V2.3R24 and I'll upgrade it later in the day.

  I created all things out of the box and everything went well so I started my entire mp3 collection to the nas disk 1 that I moved a large collection of files well over 50 GB in a go to the drive. I noticed it was a slower than I expected, but ive read also on the resolutions of vista of lille.

  Once the mp3s had been moved, I started to move a set of .iso files all files have been around the size of 6 GB, but I get an error message indicating that the disk is full. I connected to the web-based administration tool and it still says 'disk 1 loan, 469283MB (88% free) '.

  I had a conversation with an agent via the live chat option, which advised me to upgrade the firm dishes and reformat the hard disk, so that's what I'm doing.

  I was wonderring if anyone else had this problem and if so how they resolve.

  Thanks for your help :-)

  Try holding the reset button of the nslu2 for 2 seconds and the IP must return to 192.168.1.77. Make sure that your computer is on the same network range and try to ping of its ip address. If it gives an answer, you should be able to access the user interface and update the firmware. If this is not the case, try to hold the reset for 10 seconds, that will be the default value for the ip address and the password of the nslu2. If you have IP address ping the 192.168.1.77 I think that there might be a problem with the unit and it will be better to call Linksys dual cannot verify the settings.

• HP v210w - 32 gb USB Flash Drive Urgent help please :(

  Hello..

  I have a HP v210w 32 Gb USB Flash Drive.

  I was copying some stuff on it and all of a sudden it stoped working!
  I tried to open it, but it is said that the partition is not accessible and the media is write protected!

  

  I tried to format it, but it does not work! He said that the disk is write protected!

  

  I thought it was damaged but when I opened the Disk Manager, he was there, healthy and active!

  

  I tried using "HP USB Disk Storage Format Tool", and it has detected, it failed to format

  

  I also tried to use partitions such programs as 'MiniTool Partition Wizard Professional Edition' and 'EaseUS Partition Master' and they detect it as an active reader and healthy! and I can delete it's drive and recreate it, but nothing happens after the application of changes!

  

  What is the problem with my Flash drive?
  I have it only 8 months ago

  is there a solution or hope to fix it and make it work again?

  Hello Meleha,

  Try this to see if it helps.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download

  This version corrects HP usb readers that have read-only problem (unable to write to the USB because it says as its read-only).

  USB Flash Driver Format Tool (Ufix-II) is supposed to be the fix more successful by both programs.

  You might need to 7 - Zip installed to extract the .rar file if Windows cannot open it.  It's a free program.

  http://www.7-zip.org/

  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• How Windows XP Setup (F6) to use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard

  Hello

  How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.

  Kind regards
  Imane

  Hi Mike,.

  You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• USB Flash Drive gives the error "you must format the disk in drive E, before you can use it"

  I just plugged my USB pen and a message pops up saying: "you need to format the disk in drive E, until you can use" I was wondering if and how I can solve this problem? Can anyone help? Sam
  * original title - USB pen problem *.

  Hi samanthaGibbons,

  What is the make and model of your USB Flash drive?

  The USB Flash drive works in any other computer?

  It might be a problem with the drive itself, or it may need to be formatted.

  I suggest you check out the website of the manufacturer for possible troubleshooting or know how to reformat the disk, if necessary.

  I hope this helps!

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• Local disk or a USB flash drive?

  Looking to build a new couple hosted esxi5 running, and I wonder what is the best option, install esxi on local disk on the host, or run it from flash memory?

  Advantages/disadvantages of one over the other, what everyone does?

  Thanks in advance

  Kevin

  Kevin,

  Looks like you'd boot from USB if you want to save you money from having to buy hard drives.  You probably want to redirect your logs to host a server syslog for long-term storage.  If their initialization of the local disk or USB flash will make no difference when it comes to performance and running in a cluster.

• cannot get rid of the "removable disk" in "my computer" and "Device Manager", after incorrectly removing a USB flash drive

  I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
  Joe

  Hi JoeZZ,

  Please see the following instructions on how to see the ghost devices:

  http://support.Microsoft.com/kb/315539/en-us?p=1

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to recover a W7 OS on the new HARD disk USB flash drive?

  I have my Dell Inspiron 1545 laptop friends. HARD drive have a lot of bad sectors, but it was fun to do:

  • a copy of the image of recovery dell USB flash drive via Dell Backup and Recovery Application
  • a copy of the very important files
  • and a copy of the 2 partitions to each image using Acronis True Image application file:
  1. FAT16 Pri 39, 19 MB FS: FAT16 Partition: 0xde (EISA configuration)
  2. Pri, Act 14.65 GB NTFS RECOVERY

  RECOVERY partition have the same content, such as a usb flash drive with I used to do a recovery Dell image.

  If she buys a new drive HARD this what should I do/use to recover Windows 7 from a USB?

  PS. I have nothing to lose and I try to play with the hard drive has failed.
  First of all I do partition of LBA 0 to 80 GB first where bad sectors and hide this partition.
  Then I do these partitions 2 "dell" and the rest for system files.
  Then I recover these partitions of 2 "dell" using Acronis True Image.
  Then I use a usb flash drive to recover Windows 7, it retrieves for maybe 10 seconds and he said that, please restart.
  When it shows BOOTMGR is missing, press ctrl + alt + delete and now I see only 2 partitions labeled OS ~ 298 GB and RECOVERY ~ 2 GB.

  The problem is resolved.

  The best solution is to use ImageX 2.0 to extract file Factory.wim partition RECOVERY or USB flash drive. Just search on google. New installation of operating system is also an option - I know about it. Fortunately, this Dell factory contains no useless software.

  Thanks for all the help!

• Why is my 64 GB USB Flash Drive "not a backup location valid?

  I tried to turn it to a previous question, but reading of the Code of conduct for this forum, I discovered that it was inappropriate to do that.  My apologies for this.

  I am running Windows 7 Home Premium 64 - bit SP1, installed using Toshiba recovery disks (I have a new Toshiba laptop, when I got the system I opted to not have a recovery partition).  I just cleaned all the bloatware off Windows, ran Windows Update until there was no more updates for (achieved in this way SP1), and now I have a fresh and clean windows installation, which has never even been to a single Web site.  Now, I am trying to create a system image on a 64 GB flash drive (I won't even finish by using half of it, as my SSD has only about 19 GB used, and which includes the hibernation file (I disabled the pagefile, because paging files are unkind to SSDs))

  Before, I asked if it was possible to manually create a System Image of Windows 7 on a USB Flash drive (big), and I got two answers 'Yes' to two stars of the community. (See my question here)  It is also stated that it is possible on windows.microsoft.com, here.  Note that when windows.microsoft.com stipulates "the system image must be saved on a hard drive, reference is made to automatic creating system images.  If you keep reading, you'll see that the page says that if you want to manually create a a system image, this image of the system may be recorded on optical discs, a USB Flash drive or a hard drive.  If it is possible, then why will I have the following problem?

  64 GB USB Flash Drive inserted--> closed Autoplay dialogue--> Opened "My Computer"--> Right-clicked drive E (my flash drive) and the selected format--> Unchecked 'Quick Format'--> size of the NTFS system chosen and 4096 bytes of cluster--> Clicked 'Format' and acknowledged that all the data will be deleted--> waited a while for the form to fill out, then clicked OK--> closed 'My Computer'--> ejected my flash player by clicking on 'remove hardware safely'--> physically unplugged flash drive--> Grabbed a diet coke with ice--> inserted 64 GB USB Flash drive--> AutoPlay dialog closed--> opens the start--> Clicked "All programs" Menu--> clicked maintenance--> click Backup and Restore Center--> clicked on create System Image--> (scans of program for storage devices)--> my flash drive appears under "on a hard drive" and the words 'the drive is not a valid backup location' appear under my FlashDrive being listed.  For reference, "on one or more DVDs" appears just below the text saying "the drive is not a valid backup location."

  My understanding is that what I just tried to do is create an image of the system on an NTFS partition formatted (with a 4 KB cluster size) 64 GB USB Flash Drive.  But it is not letting me!  I understand that I can't plan the creation of automatic system for USB Flash drives, but according to windows.microsoft.com image and two stars of the community, it is indeed possible to "manually" create a system image on a large USB Flash drive, which I think is what I just tried to do.  If there is another way to create a system image, even more 'manually' than what I do (I'm certainly not afraid of the command line, if I need to use it I'm more than happy to do so), please let me know.

  I have a low-quaility SATA 3.0 Gbit/s notebook HDD in an enclosure USB powered bus at low prices, and I was able to create a system on that image.  However, I expect this device to fail shortly.  I also managed to create a system image on a DVD-r virgins.  I did, however, just spend $85 on a 64 GB USB Flash Drive specifically to store an image of the system, which I expect to use to back up Windows 7 with World of Warcraft installed (total size of drive C will be approximately 50 GB; I have not yet downloaded WoW; "I want to overcome this first).

  Any ideas would be appreciated.  Thank you!

  1st edit: adding links so people would not need to copy and paste to their address bar and said the last sentence of the last paragraph.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum is frought with for a windows problem reports. I know that I was very impressed when I tried it. Two me are familiar with and like Norton Ghost (which I use for 7 years without the 1st problem) and Memeo, which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com. You can get Ghost for almost nothing (like me), if you look at the sales.

  CNET has a lot of reviews of backup program to

  http://download.CNET.com/Windows/backup-software/?tag=contentBody;sideBar.

  Some of them are free (the last time I checked there are 315), some have free trials (more), and some are buying only (more than 200).

  Good luck.

• Why does movement of files on a USB flash drive last so long?

  I don't know if this is a Windows problem, but when I move a lot of files/folders (no copy, but select, then drag, or cut and paste) a place on the USB to another place on the flash drive, it takes much longer than the same hard disk.

  What is a Windows problem or a problem of flash player?

  If Windows is somehow move the files into pieces on the hard drive, then moving them back to the flash drive, I could see that as being the reason, but this seems very inefficient. If Windows says just the flash drive to move files and it does itself, I wonder if it is an inefficiency in the flash drive (or formatting) or just the nature of how flash drives move some files.

  I don't know that you have understood my problem. I moved the files to the flash drive from one folder to another on the flash drive. When I move tons of files in a folder on the Windows Installer by car, no matter where the records are or the number of files/folders are moved, it usually happens instantly and occasionally perhaps takes a fraction of a second or two; I know it's simply by changing the index (do not physically move the files). With a USB flash drive, it takes seconds to minutes, depending on how much is moved, which is usually much less to install on the windows drive. It's because flash player must physically move the files on the disk, there is no index to put it as on a fixed drive.  In addition the only way to move is to copy in memory, and then write it to the new location.  This means that each overflow bit must go through the USB connection (which is thousands of times slower than SATA cable on the real hard disk), and since then he has to go twice (in and out), it is even half as slow as new.

  There is no transfer between the hard drive and the flash player I know.

  What this means for me, it is the index or take more time to rewrite, or files are actually moved. What I'm asking is if Windows is somehow data transfer (even if it's the index) drive flash disk, then moving them backwards, slowing things down. I think that even moving them by RAM would slow it down, but I'm not sure.  Also considers that the internal drive is cached. So even if a bit should be moved, Windows will just notice "Yes move this bit later."  The progress box says it completed instantly, but really uses lazy writeback just finish the job later.  That is why if you lose power to your computer, it corrupts the files got reported as fact, but were not actually written on the disc.  Flash drives do not use the lazy "write behind caching" because they never know when the user will disconnect unexpectedly, so that they take the slow lane and check writing all ended before they say the progress bar to advanced. 

  You can change this second element by setting your USB device to "best performance" in the device, as Manager below.  But I do not recommend because it cannot handle unplug you the reader more.

  

• How to use a blank disc DVD-R as a USB flash drive?

  Hi all! I'm running Mac OS X 10.9.5 on my MacBook Pro and I was wondering how I could use a blank DVD-R disc as a form of rewriting for documents, music, spreadsheets, etc. ? My mac Let's burn me to the disc, but I can't rewrite to it after that. Help, please!

  They don't work that way. Rewritable means simply you can erase the disc and use it again. You can't write it during normal use of the disk. This, to a USB flash drive.

  To be same rewritable, you can use a DVD - RW, DVD - r not it is not rewritable. You can look for third-party software that allow you to use the drive as a flash drive, but I am not sure that these programs exist. Not much need for it.

• Pavilioin P6710f: Changing Bios then boot from a USB flash drive

  How can I update my bios to enable booting from a USB Flash drive. My bios is American Megatrends 6.07, 04/05/2011 and the only options are CD, hard disk, floppy. Is there a way to change this? To test the Windows 10 repair disk I created, my system froze to the blue screen "choose" keyboard layout. I couldn't use the usb mouse or usb keyboard. As a result, I had to restore my system to windows 7 using my Norton Ghost recovery disk and backups that I had done before downloading windows 10.

  After the opening of the bios and clicking on the hard drive by default, I found that I had a choice, including the USB Flash drive that I have pugged just forward to restart. This answered my question. Thanks to everyone for their contribution. It was not necessary to Flash the bios after all.