v2 disc may not work with disk v3

Similar Questions

• USB printing support is a USB device that is older and may not work with USB 3.0

  Separated from this thread.

  Mahesh,

  I had a same problem, followed your recommendations and everything worked fine for a day and a half. Now I get the same error again.   Are there any additional settings or changes I do that can keep it works?

  Thank you!

  Hello

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the USB device?
  2. the problem occurs only with a specific USB device?

  3. What is the brand and model of the computer?

  This problem might have occurred because of these reasons:
  1 USB drivers are corrupt.

  2. USB port does not work.

  3. hardware issue.

  I suggest you run the hardware troubleshooter to check if it helps.

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Hard drive replaced, but the recovery disc may not work properly

  Oh here, my laptop (Acer Aspire 7730) will not start.

  I believe that I made the correct recovery disks when I got the machine before he fell, but I recently replaced my keyboard and hard drive with the same components after damage was inflicted on my laptop and I tried to run the steps in Acer recovery since the restore disc 1. He seemed fine, but after installing the 2nd disc I have now "BOOTMGR is missing" "Press Ctrl + Alt + Del to restart" and cannot get it to load the backup that I did when the machine was working before-hand. I can get into setting up and see that the hard drive is now identified in the list of hardware (it was empty when the broken hard drive was still mounted), maybe someone can suggest some options to solve the my problem please?

  I just checked the recovery disc 1 on another machine and found these folders and files on it...

  http://i812.Photobucket.com/albums/zz48/Vanguard_01/VistaBootdisc1.PNG

  Is it possible that the backup that I did was for a specific hard drive, and because this HDD is different it won't find anything?

  Thank you

  Vanguard_1

  Hi Debleena5 and thanks for the suggestions, but I've reached the re-installation of the disc by using a bit 'out of the box' the thought process.

  I bought a box 2.5 "SATA to connect to any computer via the USB port to try to get something on the corrupted hard drive, but this failed. I then removed my new hard drive (which began at start up OK, as I mentioned in the question above) and placed in the case and plugged into my Windows 7 laptop. Once he had run up to speed I started to explore to see what files (or even at all) had been transferred during one of my recovery disks. I've not found much until I changed the "do not show hidden files and folders check" save a file that has been locked after you change the permissions, I went further and ended at the request of then ran CHKDISK and of course he scanned my drive and found and corrected some errors very quickly. After that, I unplugged then I went back to my Vista laptop and re-inserted the new hard drive in the broken machine.

  At this point, I was wondering if the disk drive on the machine may also have been damaged so I plugged a DVD player external via USB and changed the sequence to boot to the USB device. I started the laptop and the drive started to load the files and I could then complete the resettlement of these two disks and then to set up the machine as if I had just bought it.

  I'm very relieved that I managed to sort it out and now I have to upgrade to Windows 7 on this laptop that I read on and seems easy. Just a shame I can't copy the installation of my 2nd, portable more recent.

  Thanks again,

  Vanguard_1

• FBus Monitor may not work with Configurator at the same time

  I am using NI USB-8486 material and I can get Fbus Configurator work on it. But whenever I run the FBus monitor, the Configurator will go wrong. (Device on the Fbus become invalid)

  I checked the Configuration OR-FBUS Interface utility, I have seen that the use of the port can be either OR-FBUS or Bus-monitor.  Since the USB-8486 only has a port, it means we can only support a single application (Configurator or monitor), instead of two at the same time?

  I'd appreciate any help!

  Hi Steve,.

  That's correct - USB-8486 can function as an interface device or monitor buses at the same time, and the role is configured in intensive care.

  If you want to have two roles at the same time work, you will need two NICs installed.

• My printer does not work with hpeprint on iphone

  My photosmart7520e printer work with air printing but may not work with eprint

  Hello

  EPrint AirPrint are two different things. Please try this:

  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.

• This cable or accessory is not certified and may not work reliably with this iPad.

  I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

  < re-titled by host >

  These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

  Before you try the following steps, make sure that the USB cable and your port is clean!

  1. Restart your iOS device.
  2. Try a different cable certified by Apple or a charger.
  3. Make sure you have the latest version of iOS.
  4. Contact Apple support to implement the service.

  I hope that you will charge your iPad in no time!

• Click right does not work with Firefox, which may be the problem is Firefox or my computer?

  Click right does not work with Firefox, which may be the problem is Firefox or my computer?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

  The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

  When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  Additional resources:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

• The product key you entered will not work with this version of windows

  I have a product key for windows 7 Professional n but I used a professional installation usually windows disc 7 and now my windows 7 wont turn on I get the message "the product key you entered will not work with this version of windows. Any ideas how to solve this problem?

  Seanhough

  You may be stuck re - install the version you have the key for or by purchasing a key for the version that you have installed.

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Gmail said "some important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I visit Gmail using Firefox version 8.0 (running w7) I get this message: "important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I click "Try Standard Version Anyway" it works, but for some reason, Gmail is say that Firefox 8.0 is not a modern browser. Also, whenever I visit Gmail, he returned to the basic HTML version... ba.

  It seems that Google is trying to make you switch to Chrome. I would stick with Firefox, but Gmail is an important part of my browsing...

  I found the solution... browsing around, I found this link:

  http://www.Google.sh/support/forum/p/Gmail/thread?TID=627898d83a02180f & hl = in

  In type of Firefox:

  Subject: config

  Filter the results with:

  "general.useragent.

  All fields that are "BOLD" must be reset to ZERO. Do a RIGHT CLICK and RESET each field "BOLD".

  Worked on my w7 machine!