VAIO PRO 13: CPD WATCHDOG VIOLATION after BIOS UPDATE

Similar Questions

• Satellite Pro L100 does not work after BIOS update

  Okay, the computer is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during an update of the BIOS on the official website of Toshiba. I downloaded the zip file, it extracts and activated the .exe file at the Interior.

  The window opened by the .exe is a program flashing BIOS, the .exe wrote at the same time a new BIOS file to a temporary folder.
  When he tried to use the program I got was an error saying it couldn't find the new BIOS to the entrance.

  I tried again only to get the same error. Then I left the laptop for several minutes and when I got home, I found a laptop no longer Virgin.
  On which I hear by an obvious lack of BIOS functions i.e. power LED does not change when the connection to disconnect it from the power outlet and the fact that I had to take out the battery to turn off the machine. When the power is turned on now it is check readers and restarts (no display, no beeps)

  What should I do?
  The first thing that comes to mind was to reset the BIOS.
  A problem, I can not find the RTC battery or a rider switch.

  Hi George

  I can't tell why it happened, but I can tell what happened.

  In my opinion, something went wrong during the process of updating the BIOS and the ROM modules was not writer properly.

  Simply says the BIOS update procedure has failed.
  In this case, you will need to contact the ASP in your country for a fix
  The technician must be able to rewrite the ROM module and updated the BIOS again.

  Good luck buddy

  See you soon

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• I get CPD Watchdog Violation whenever I use word or excel

  I get the CPD Watchdog Violation whenever I use word or excel.  I uninstalled and reinstalled the program.

  Can someone help me solve this problem?  Where can I find the dump file to send someone may view and solve problems?

  Thank you!

  Rachel

  133 error checking, {1, 1e00, 0, 0}

  Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

  Follow-up: MachineOwner

  Unfortunately, there is nothing conclusive in these dumps, bar a few tips here and there for us in the right direction, but we can take some measures that can help solve the problem.

  1. update your BIOS.

  Identification information of the machine [of Smbios 2.7, DMIVersion 39, size = 1390]
  BiosMajorRelease = 4
  BiosMinorRelease = 6
  BiosVendor = FRIEND
  BiosVersion = 8.03
  BiosReleaseDate = 28/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = 23-e010
  Family = 103C_53316J G = D
  SystemVersion = 1.00
  SystemSKU = H3Y95AA #ABA
  BaseBoardManufacturer = PEGATRON CORPORATION
  BaseBoardProduct = 2AF1
  BaseBoardVersion = 1.02
  1: kd >! cpuspeed sysinfo
  CPUID: "Intel (r) Core i5 - 3470 T CPU @ 2.90 GHz"
  MaxSpeed: 2900
  CurrentSpeed: 2893

  BIOS of desktop PC HP Compaq consumer update (SSID 2AF1 ROMA family).
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-139899-1&cc=us&DLC=en&LC=en&OS=4132&productOid=5296835&sw_lang=&product=5351314

  Caution:

  BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  2. Update Windows 8.1.

  You have an external VGA video card Multi monitor adapter USB 3.0 to installed? If you do, please make sure that it is installed correctly and working properly.

  If you continue to crash, please run the Verifier (DV) according to the instructions in the link below.

  Note: Be sure to read and remember the steps to reset the DV in case of crash and post a link to the newly generated crash dump here.

  Driver Verifier - stalking a bad driver to behave. Co-written by ZigZag3143 & JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

  Please download a copy of your system information file. Click 'Start', type "msinfo32", click on "file" at the top of the page, select 'export' and give the file a name and click "Save".

  Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• CPD Watchdog Violation BSOD

  I get the BSOD with error Violation of CPD watchdog for a few days now on my computer running Windows 8.  I searched and read a bunch of other posts related to this error, and there seems to be a very broad error message.  Because of what I was doing at the time of accidents, installation of games (WoW & TERA) and streaming video, I thought it might be a updated driver for my wireless card but after updating that and the driver LAN for the mobo, I always get the BSOD.  I posted a link to the file the last crash on skydrive below minidump and my less than system characteristics.

  https://onedrive.live.com/redir?RESID=3454DA7AB1AC9E9C! 200 & authkey =! AEu793dqZGE8jRI&ithint=file%2c.zip

  Motherboard ASUS F2-A85-V Pro

  AMD A6 - 5400K Trinity 3.6 GHz APU

  Corsair Vengeance 16 GB of DDR3 memory

  Intel 330 series Maple Crest 60 GB SSD (boot drive)

  Seagate Barracuda 2 TB HDD

  ASUS PCE - N15 PCI Express Wireless Adapter card

  RS

  This accident was related to driver helper ndisrd.sys NDISRD NT Kernel Resources.  Yours is 2 years and more.  I'd install the most recent driver available, even if it is the same date that your probably became corrupted

  I would also upgrade to win 8.1

  By: 9200.16628.amd64fre.win8_gdr.130531 - 1504

  Error checking 133, {1, 1e0d, 0, 0}

  WARNING: Unable to verify timestamp for ndisrd.sys
  ERROR: Module load completed but symbols can be loaded for ndisrd.sys
  Probably caused by: ndisrd.sys (ndisrd + 2ed9)

  DPC_WATCHDOG_VIOLATION (133)
  The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
  or higher.
  Arguments:
  Arg1: 0000000000000001, the system has cumulatively spent a long period of time to
  DISPATCH_LEVEL or above. The offending component may generally be
  identified with a stack trace.
  Arg2: 0000000000001e0d, the monitoring period.
  Arg3: 0000000000000000
  Arg4: 0000000000000000

  Debugging information:
  ------------------

  DPC_TIMEOUT_TYPE: DPC_QUEUE_EXECUTION_TIMEOUT_EXCEEDED

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: 0 X 133

  Nom_processus: System

  CURRENT_IRQL: d

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff802c0be2fa3 to fffff802c0a63440

  STACK_TEXT:
  fffff880 '054f43a8 fffff802' c0be2fa3: 00000000'00000133 00000000'00000001 00000000' 00001e0d 00000000' 00000000: nt! KeBugCheckEx
  fffff880 '054f43b0 fffff802' c0aa81e1: 00000000'00000002 fffff880 '02-00180 fffff880' 054f4510 fffff780'00000320: nt! : FNODOBFM: 'chain' + 0 x 14600
  fffff880 '054f4430 fffff802' c1177e94: ffffffff 'ffd0a270 fffff802' c11a1902 00000000' 0bbc5261 00000000' 00000000: nt! KeUpdateRunTime + 0 x 51
  fffff880 '054f4460 fffff802' c0a5c73a: 00000000' 0a2b7b48 00000000' 0cbc3cdf fffff802'c11a19a0 00000000' 00000000: hal! HalpTimerClockInterrupt + 0 x 50
  fffff880 '054f4490 fffff802' c0a44310: 00000000'00000000 00000000'00020106 fffffa80'0d9ae200 00000000' 00000000: nt! KiInterruptDispatchNoLockNoEtw + 0x1aa
  fffff880 '054f4620 fffff802' c0ab54e5: 00000000 00000000' fffff880 '054f5c10 fffff880' 054ef000 00000000 00000001': nt! KxWaitForSpinLockAndAcquire + 0x20
  "fffff880 '054f4650 fffff880' 0596aed9: fffffa80 ' 10686840 fffff802 ' c0abb405 00000000'00000000 00000000'00000000: nt! KeAcquireSpinLockRaiseToDpc + 0x35
  fffff880'054f4680 fffffa80'10686840: fffff802'c0abb405 00000000'00000000 00000000'00000000 00000000'00000000: ndisrd + 0x2ed9
  fffff880 '054f4688 fffff802' c0abb405: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 016c5a34: 0xfffffa80'10686840
  fffff880 '054f4690 fffffa80' 0db3c2f0: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KeExpandKernelStackAndCalloutEx + 0 x 25
  fffff880 '054f46d0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0xfffffa80'0db3c2f0

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  ndisrd + 2ed9
  fffff880'0596aed9?              ???

  SYMBOL_STACK_INDEX: 7

  SYMBOL_NAME: ndisrd + 2ed9

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: ndisrd

  Nom_image: ndisrd.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4fc6df85

  FAILURE_BUCKET_ID: 0x133_ISR_ndisrd + 2ed9

  BUCKET_ID: 0x133_ISR_ndisrd + 2ed9

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x133_isr_ndisrd + 2ed9

  FAILURE_ID_HASH: {c3bcadcd-874f-3407-01b5-a6ff3ab0534a}

  Follow-up: MachineOwner
  ---------

• CPD Watchdog Violation when connecting to Internet

  I just built a new computer and I had a problem with the connection to the Internet.

  After you have installed the network adapter and the drivers that come with the CD I have connected to my home network.  It worked for maybe a minute or two, but then my computer would freeze for maybe about 5 seconds then blue screen with the message «Violation of Watchdog DPC»  This happens whenever I try to connect to the Internet.

  As far as I know all my drivers are up to date, as I installed them directly from disks accompanying parts.

  I don't have any installed programs other than the stuff that comes with Windows and some drivers.

  DPC_WATCHDOG_VIOLATION (133)
  The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
  or higher.
  Arguments:
  Arg1: 0000000000000000, just a DPC or ISR exceeded his time d. Delinquency
  component may generally be identified with a stack trace.
  Arg2: 0000000000000501, counting from the time the DPC (in ticks).
  Arg3: 0000000000000500, DPC time of bids (ticks).
  Arg4: 0000000000000000

  Bug check 0 x 133 DPC_WATCHDOG_VIOLATION.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/jj154556 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Unfortunately, this crash dump failed to identify the driver responsible. Run the Verifier (DV) according to the instructions in the link below.

  Note: Be sure to read and remember the steps to reset the DV in a collision. Please download the Minidump generated recently to your onedrive and share the link here.

  Driver Verifier - stalking a bad driver to behave. Created by ZigZag3143, Co.authored by JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite Pro A300-15 t does not restart on the current after BIOS update

  Hello

  There is something wrong with my Satellite Pro A300-15 t. I made an update of the BIOS of toshiba recently with the latest Web site and it installed successfully. But after the installation, I noticed that my laptop does not restart when it is connected to the power adapter. It restarts and works perfectly when its power on the battery.

  After restart or start-up the laptop (on battery), it will be well when the adapter is connected.

  But, when I reboot when the adapter is connected, after his stop, just power light turns on for a second or two and gets off automatically. And not even the laptop starts manually by pressing the power button (LCD is turned off when the power light comes on for 2 seconds) when the adapter remains connected.

  So what I do is to pull the plug on the adapter, then start the computer manually by pressing the power button and reconnect the plug of the adapter to the laptop starts. It works well this way. Rest everything works perfectly.

  And this problem started after the update of the BIOS. Now, I don't know how to remedy the situation I don't know if there was a bug in the last update of the bios.

  Details of the update from: http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?service=AE

  30/07/08
  Update the BIOS
  This Bios update adds functionality to your system.
  Satellite Pro A300 Toshiba of 3, 60 - WIN

  So please help me to solve the problem.

  Thank you best regards &,.
  Manjit M.

  Hello

  Try to update the BIOS again
  In addition, access the BIOS settings and set the default parameters. Save it and try again.

  Good bye

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Yoga 2 Pro Black Screen after Bios Update

  Only, I have formatted my yoga 2 pro, downloaded the drivers and ran the update of the Bios. I followed the instructions on playing ran me the .exe, one click on next/ok until you restart the laptop and if I'm not mistaken a menu red with a progress bar appeared. At this time, I left and when I came back a few minutes later, the laptop is on, the lighting of the screen was on but the screen was black, the backlight of the keyboard was also turned on and everything else was off. Lights on/near the switch indicating if there turned on and connected to the AC are off.

  It was like that for more than 30 minutes now, no sign of progress. This happened to someone else before? I'm not very keen on must turn off or unplug the laptop while flashing the BIOS, but at this point there is not much else I can do.

  I found the answer to my problem to

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/yoga-2-BIOS-update-crash/m-p/1322487/high...

  Now that I found this post, I remember the instructions telling me to turn it off manually when I've updated the bios earlier this year. However, these instructions don't mention about it, maybe they should be updated?

• Satellite Pro A200 - problem after BIOS update

  Help!

  Tried the BIOS update, got the screen blue, computer laptop doesn't work anymore, any chance I can reset the BIOS?
  Sorry for the vaugeness of the position enough to receive the message without reason below

  "Your message contains profanity or inappropriate language. In the interest of your fellow forum users, we ask you to change your message. »

  Hello

  I'm sorry to hear that. It's a really bad situation now. Unfortunately, I do not believe there is something you can do alone and I'm afraid that you need professional help.
  The best thing you can do is to contact the nearest authorized service provider.

  They can help you.

• HP Envy 15 t-j100: no operating system after BIOS update

  After many failures of start-up (see messages in the forum to Boot), I was advised to update the drivers, etc. Did so, using the HP Wizard, one of the system BIOS updates. It's the last thing I did on this machine, I use now a laptop borrowed. The update of the BIOS seemed to go well, installed, then checked her restarted. But it does not re - start. "No operating system found... "Thank you very much HP.

  I told Win 7 Pro, when I ordered this machine instead of the 8 win pathetic, if I do not want to restore it to factory settings. Now, how can I get out of this hole?

  David

  Re-enter the BIOS and verify that Legacy boot is enabled-Secure boot disabled. If you need to change it don't forget to save & exit. When you restart for the first time after having turned startup security turned off, pay attention to the small notice indicating that you must confirm save this setting by entering a PIN shown + enter, otherwise these new settings in the BIOS are not saved.