Restore error

Similar Questions

• IPhone 4 update and restore error

  Hi, my iphone 4S get error at yester day. And now I get the error in the firmware restore in iTunes.

  Failure without title (29)

  First of all, I want to thank you because broke my iphone.

  I don't know what to do. Can you help me? Thank you

  It is copied from here. Follow the instructions below.

  Get help with iOS update or restore errors - Apple Support

  Search for hardware issues

  If you see the error 53, know what to do.

  Errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 56, 1002, 1004, 1011, 1012, 1014, 1667 and 1669.

  Your iPhone, iPad or iPod touch or computer might have a hardware problem that prevents the upgrade or restore to complete.

  1. Make sure that your security software and settings are not blocking your device to communicate with the server to update from Apple.
  2. Try to restore your iPhone, iPod or iPad, twice as much when you are connected with a computer cable, and network that you know are good.
  3. Make sure that your security software and settings are allowing communication between your iPhone, iPad or iPod touch and update servers.
  4. If you still see the error message when you update or restore, contact Apple technical support.

  If you still see the error message, are looking for outdated or updated software.

• Ststem restore error code 0 x 490 and the verification of the integrity of file Sys...

  don't really know where to post:

  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  System Restore error code 0 x 490 and Sys files integrity check...

  .. .and now after trying to make the (that failed) repair and restoration * who failed 3 times) and the "clean boot" of http://support.microsoft.com/kb/929135 here my laptop charge a temporary office that does not record my personal settings. I uninstalled programs I thought that maybe the problem, but it always loads the Temp. desktop computer. I have no one.
  drive recovery for this Toshiba laptop but I do it to my another Tower, which is a Toshiba as well. I really want to do a restore if I can help it. I have too in my bookmarks/favorites to lose. I just want to know what the problem is and fix it.
  Any help would be appreciated. I don't really have the money to take it to a computer store.

  Concerning
  BT

  Hello

  See if this helps you:

  "Error of the user - logged on with a temporary profile profile".

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  If you do not have to make a recovery here is the use of the Toshiba Recovery Partition.

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  See you soon.

• System Restore error (0 x 81000202) event log

  I m having problems with my entire system so I'm trying to restore but I have this error.  I have no sound my icons have changed all my security features are disabled and will not not turn on.

  There is much info on this option if you goto http://support.microsoft.com/.  Put in (0 x 81000202) event log system restore error in the search box.  Make sure you spell not restore correctly.  I copied and pasted your title in the search box, and the only thing that came was your article.  Then I noticed the fault of strike.

  For the most part, it is to create a restore point and turn it on.  If you do not have restore points then all of this information will not help your current problem.   What a "Factory Reload" or you have any records to reload it?

  When you say does not illuminate, you hear the security features?  In addition, enter Windows in safe mode to try your restore: which is to hit the "F8" key until Windows starts to load.

• 0 system restore error 80070005 x

  After that I downloaded a Windows critical update, change the icons in my taskbar, so I tried to do a system restore.  Now, I can not complete the restore of the system's message: impossible to extract the file (C:$ Extend\$ RmMetadata\$ Txf) the restore point.  An unexplained error occurred system restores (0x80070005).   I had this happen before around the first of the year.  How can I fix it?

  Ruth

  After that I downloaded a Windows critical update, change the icons in my taskbar, so I tried to do a system restore.  Now, I can not complete the restore of the system's message: impossible to extract the file (C:$ Extend\$ RmMetadata\$ Txf) the restore point.  An unexplained error occurred system restores (0x80070005).   I had this happen before around the first of the year.  How can I fix it?

  Ruth

  already answered

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070005/728b2420-739b-4C9B-8f50-99d0b66d9b19

  http://www.SevenForums.com/backup-restore/48067-system-restore-error-0x80070005.html

• System Restore error: 0 x 80070571

  Separated from this thread.

  Judge that the method and the computer has stagnated at 28% more than an hour until I hard out there. Is there another way to fix the disc? The Base filtering engine does not also some other dependent process making it useless for example Firewall, internet connectivity

  Hi George,.

  Welcome to the Microsoft community.

  According to the query, you get the system restore error: 0 x 80070571 when you tried to perform a check disk (Chkdsk).

  To help solve your problem better, could you give us the following information?

  1. Why you try to run Chkdsk? Are you facing performance issues?
  2. You get an error code when running Chkdsk?

  This is perhaps due to the corruption of user account or corrupt file system or any software of third-party programs.

  I suggest to create a new user account and then try to perform a system restore.

  See the following Microsoft support article to create a new user account and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  It would also be useful if you we post the logs in Event Viewer to analyze and solve the problem better.

  Try these steps and let us know the results for assistance.

  Thank you

• System Restore error 0 x 8100203

  Unable to complete a back-up due to cannot read the disk (Restore error system 0 x 8000203)?

  Someone had this problem using external hard drives?

  Hey Gman,

  Check if all services as the service Microsoft Software Shadow Copy Provider, who are responsible for the system restore is enabled and running on the computer. You may need to activate them and start these services.

  Visit this link:

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/0f2eebbe-6CDF-4ecc-93af-9249b7339ec9

  Alternatively, you can perform a clean boot to see if any software conflict is causing this problem. Here are the steps.

  http://support.Microsoft.com/kb/929135

• can someone please help, unable to update or restore error-1

  can someone please help I'm unable to update or restore my iphone 5 c due to an error (- 1).

  It is usually a hardware error and you will need to get it repaired. You can also get the same message if the iPhone was jailbroken.

• iPhone 4 crashed, has entered into recovery mode and don't update or restore (error 4013)

  Hi all

  So, the other day, while watching a YouTube video, my iPhone 4 became unresponsive and turns off. Since then, he has been slain in recovery mode, only showing the "connect to iTunes screen.

  iTunes gives me two options: update or restore. As I wanted to save my data (I have been so sloppy as to not have backed up the device for about a year!) I tried to update a bunch of times. However, it keeps me gives error 4013. Then, having given up this possibility, I also tried to restore the device several times, but unfortunately exactly the same phenomenon occurs.

  What happens is: iTunes downloads and extract the software, says "waiting for iPhone" for a few seconds, then it said "Preparing iPhone software update" because I think little about exactly 15 minutes. Then he said "Waiting for iPhone" still for a few seconds, after which it gives me error 4013.

  My guess is the iPhone automatically leaves the recovery mode so that it gives me this error because after 15 minutes and restarts alone, leaving iTunes to "think" that there is some kind of connection problem or do not recognize the device as being the same when it turns off and turns back on after 15 minutes. If this is the case, perhaps restarting interrupts the update/restore process. Or maybe just crashes in this state of preparation for 15 minutes because he is unable to do what he needs because of a sort of damaging the material.

  What I've tried so far:

  -Update iTunes to the latest version (12.2.2)

  -Updated the software on my Mac (although I must say that it is an old MacBook with OS X 10.7.5; I don't know if it's any factor here)

  -Restarting my computer

  -Switch to the other USB port

  -Using another USB cable (although the one alternative that I have is not in very good condition)

  -Try on a friend's computer (a much newer MacBook; I don't know what operating system well)

  -Force the device to restart a package of time (now the power and the home buttons)

  -A few third-party applications that claim to be able to get the iPhone out of recovery mode

  Any of you have ideas, ideas or suggestions on what is the cause and how can I get my phone back to life again? Recover my data would be obviously ideal, but I would also be very happy with just equipped with a device of work once again. I know it's an obsolete phone but it has always worked well.

  Thank you in advance for your help!

  Anyone? I could really use some help. Thank you!

• Laptop HP G42-303DX system restore error 0x800700B7

  I have a laptop HP, model G42-303DX, running Windows 7.

  When Windows tries to start, it displays the message: Windows Error Recovery / cannot start Windows.

  Then StartUpRepair launches and research about a minute for the problems.  Then it displays the message "Startup Repair cannot fix automatically.  I gave options: (1) sending info (can not since I can't it connect to the Internet) or (2) not to send (should I select).

  I click on Details of the issue and see the following:

  ProblemEvent name: StartUpRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200545 problem

  Signature of the problem 05: AutoFailover

  Signature of the problem 06:29

  Signature of the problem 07: corrupt the file

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  The next screen to appear is: HP Recovery Manager

  I tried to do five different restorations, starting with the most recent restore point and working up.  All restore attempts failed.  In 3 of 5 attempts, I got the error code: 0x800700b7.  And in 2 of 5 attempts was the failure code: 0x8000ffff.

  I created a bootable (Kaspersky Rescue v10) DVD rescue disk and run a deep scan of 4 hours to check the virus, Trojans, etc, and it found nothing.

  When this laptop was purchased from Best Buys, we have not all discs.  I'm sorry to say that we did not create recovery disc.  I checked on the HP support site to order a set of recovery discs and can be found only for Windows 7 in the 64-bit version.  I don't know if this PC has been configured as a 32-bit or 64-bit machine.

  In addition, I use the Recovery Manager to create DVDs from backup files on that PC.  This problem started in December, and according to my daughter-in-law (the only user of that PC), it gave him no problems until this.

  I would REALLY appreciate any help on this... I'm a little at my wits end.

  Thank you

  Hello

  If you press F11 at startup, then it will take you to HP Recovery... .but recovery will reset the computer to factory

  Settings... Make sure you only have all backed up... If F11 did not help, then here is the link to order recovery disks for your

  System...

  DVD - Windows 7 64B + Supp 2 Recovery Kit ► Your system has Windows 7 Home Premium 64-bit installed on purchase... you can check the specifications of your system here... HP G42 - 303DX Notebook PC product specifications

• Cannot use System Restore - error code 0x80070005

  I can't restore my computer to an earlier date as it comes back with the error code 0 x 80070005 suggesting that I disable the virus protection that I've done and tried again, same message appeared, I uninstalled the antivirus completely and always got the same message, I downloaded then the scanner from Microsoft which showed no problems with all the files even with a total sweep someone out there can offer advice please

  Moved from feedback

  Original title: error code 0x80070005

  Hello

  Thank you very much for your response, I am using windows 7.

  I managed to solve the problem by choosing a much earlier restore point, which suggests the problem was caused by a Microsoft Update.

  Kind regards

• Restore error 'file \minint\System32\kdcom.dll could not be loaded. The error code is 4 "

  Hello...

  I have a DELL D830 with XP and I get the message:

  File \minint\System32\kdcom.dll could not be loaded. The error code is 4.

  Everytime I try and restore my computer...

  What can I do to fix this, that does not cost a lot of money?
  The only cost of $180 (refurbished) computer... I really don't want to pay that much to fix this...

  It sucks, virus SUCK!  Why do people do the virus? (it seems lame)

  Help, please!

  I had installed security trend, however apparently the virus that caused this exceeded the trend...

  Hi NickRider,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Disconnect all external devices and try to start the computer.

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• Dell PC restore error message

  Hi all

  I had problems with my Dell Dimensions 5150 Windows XP desktop. I find the PC Restore by going Ctrl F11. As I ran it I got the restoration of failure error message please click on restart to restart. When I did that I now can no longer access my files, I just get the error message
  Loading PBR for descriptor 2... fact.
  Playing a disc error has occurred
  Press Ctrl + Alt + Delete to restart
  Whenever I do this, I get the same error message.
  Anyone have any ideas of what I can do?
  Thanks a lot waiting for a help
  Andrew

  the new error message is the result of trying to install the old software starting the restore disc, using the f11 key.

  Although the process has been a failure, he changed probably changed the dma setting on the hard drive, where the error it produces now.

  what you can do is to transfer this question on the forums of dell.com because there will be experts dell answering questions there.    I think that the hotfix changes the hard drive in your dell read udma (zero) instead of dma bios.

  In addition to repost your question in the dell forums, you may also be able to use the following syntax:

  http://www.Paragon-Software.com/home/RK-express/

  and or follow these steps:

  You can probably remove the hard drive from the computer and then install it on a working computer as a secondary drive.

  Then, you can use this functional computer and the o.s. to extract your files out of it.

  also, if by chance you were trying to fix an unstable system of files using the factory restore procedure, then you can run a disk drive to check hard disk via the functional computer, which undertakes to repair the file system unstable.

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• Code error WinDef 8050800c and system restore Error 80070002 are related

  Hi all

  During the last weeks of twoo many discussion happened for WinDef - and MSE-error 8050800c.  The problem known inside this WInDef cannot scan or update at required intervals, created havoc and thousands of users are complaining about and at the same time try to find a solution.

  I am one of those users.  The question is not only that MS has not come up with a fix, but also this WinDef exhibits strange behavior.  Strange in a sense that one day working and the other is not.

  At the same time, people started having problems with the system restore in Vista, where everything is working correctly, except for the fact that the system will be back on the date indicated, coming with a notification "unknown error" and an error code 80070002.

  I am one of those users too.  Looking around the solutions both almost simultaneously and recent issues that hit my pc, I found that the solutions proposed by the MS people are circling around the keys to register ProfileImage.

  These questions are treated as separate issues, I think they are related.  For example, in this forum, regarding the error of WinDef a solution has been proposed recently around the ProfileImage.

  But a similar thing has been proposed by MS team, study the problems of SR points.

  Please see these links.

  WinDef: http://social.answers.microsoft.com/Forums/en-US/msescan/thread/a5810b32-5470-46aa-8be4-634f06064131

  System Restore/backup: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx

  I appreciate your point of view and a possible solution to these two problems please.  Note that I already checked my ProfileImage values.  Well, all are created, except for a key that is where it seems completely empty.

  Thank you very much in advance.

  TrDo.

  Hello

  Thanks for the information; your efforts are very much appreciated.

  This happens when the Windows Vista Restore Wizard cannot access the files due to access denied or restore points missing or damaged.

  To restore the computer to a previous state, make sure that there are no corrupt restore points and backup Windows and Volume shadow copy services are also running.

  Connect to the computer as an administrator and follow these steps.
  1. start Windows Backup and Volume Shadow Copy services.
  a. Click Start, type services.msc and press to enter.
  b. search for Windows Backup and Volume Shadow Copy services and start them.
  2 start the computer in safe mode and open the system restore and check the result.
  Safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.