validate backupset

Similar Questions

• Validate backupset RMAN

  Hello
  
  Two-node RAC system. Database version 11 GR 2
  
  I have two scripts - a script backups, a database ASM FIU (local backup) and another script uses the command "backupset backup" as shown below to the remote NFS mounting.
  
  Run {}
  allocate channel device type d2 disc format ' / cloudfs/oracle/temp/%U';
  backupset backup completed between ' sysdate-1' and 'sysdate ';
  output channel d2;
  }
  
  
  First question - what happens if the FRA ASM is not finished on time and still running. And the second script that the FRA of ASM to the NFS will start the backup run at the same time?
  
  I think that the NFS backup is damaged. I have two configuration scripts run two hours apart from each other. But I think that this is not a good way to do it, because if the first backup runs longer than two hours?
  
  Second question - can the command «backup backupset...» "expected automatically the first backup before it continues so it can back up all of ASM backupset?
  
  Thank you in advance.
  
  Published by: feverlove on October 21, 2012 15:43
  
  Published by: feverlove on October 21, 2012 15:46

  Hello;

  First question - What happens if the ASM FRA is not completed on time and still running. And the second script that backup to the NFS will start execute at the same time??
  

  I think it would work because the backup locations are different. But I have no way to test. Maybe save a tablespace as a small test.

  Second question - Can the command "backup backupset ..." automatically waits for the first backup to complete before it continues so it can backup everything from ASM backupset??
  

  backup backupset is used to make copies of games to backup so not.

  Example of

  RMAN>backup device type disk
  backupset
  completed before 'sysdate-10'
  

  Best regards

  mseberg

• RMAN BACKUP - validate

  Dear Experts,
  
  Version of DB - 11.1.0.7
  
  I have an RMAN BACKUP taken on the disk with the tag 'NAME of the tag. Is there a way to validate the backup using its tag name to check if it will be useful for a successful restoration and recovery of a different envt? Enjoy your thougts
  
  Thank you

  You can try

  RESTORE DATABASE FROM TAG 'tagname' VALIDATE ;
  RESTORE ARCHIVELOG ALL FROM TAG 'tagname' VALIDATE;
  

  There is also a command post, but it's the syntax requires allows you to specify the BACKUPSET and not the tag

  VALIDATE BACKUPSET 'key' ;
  

  Hemant K Collette

• validate the rman backups

  Hello
  
  Oracle 9.2.0.1
  backup incremental cumalative RMAN
  
  Hello
  
  I do backups incremental cumalative. Full level 0 Friday, level 1 differential made Mon. - game.
  
  I noticed that if I run a RESTORE DATABASE VALIDATE command, it checks / uses all the pieces that are part of FULL LEVEL 0 only. But it doesn't tell me whether the incremental backup items created are good or not.
  
  How (without actually restoring to test the server) can test/validate until the last daily incremental backup?
  
  J

  VALIDATE RESTORE them will do only full backups, LEVEL 0 backups, controlfiles, spfile, copies of data file and the archivelogs. However, you can VALIDATE a LEVEL 1 backupset with simply:

  RMAN> VALIDATE BACKUPSET ;
  

• STATUS = FAILURE FOR DEVICE_TYPE = SBT_TAPE

  Hi all

  Please see the output of the SQL statement that indicates the size of each backupset in the last 7 days of oracle database machine: here STATUS = FAILURE are rman backups triggered from Netvault Dell backup server. Those with STATUS = COMPLETED is the backup manually from the machines of oracle rman database command prompt. The configuration of the Oracle RMAN database server is also attached.

  Can you tell why the STATUS = FAILURE comes for DEVICE_TYPE = SBT_TAPE?

  
  

  
  

  Hello

  You can check your backups on tape of rman with:

  RMAN > validate backupset 42,30,22,19,16,13,10,7,4;  (failure of 42,30,22,19,16,13,10,7,4 are backupset_keys your output.png file.)

  http://docs.Oracle.com/CD/B28359_01/backup.111/b28273/rcmsynta053.htm#RCMRF162

  Concerning

• ORA-19599: block number 45289 is corrupt in the backup piece

  OS: RHEL 5.7 64bits

  Database: 11.1.0.7

  Hi all

  I have problems to restore RMAN backup on test computer. The restore command is sick of following error message:

  ORA-19599: block number 45289 is corrupted in the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 item

  I already checked the piece back on prod and it seems OK:

  RMAN > validate backupset 3840;

  From post on 27 February 15

  using channel ORA_DISK_1

  using the ORA_DISK_2 channel

  channel ORA_DISK_1: starting from the validation of the data file backup set

  channel ORA_DISK_1: reading of the backup/oradata/ERP/RMAN_BACKUP/RMAN_ERP_20150227_15927509_1 element

  channel ORA_DISK_1: piece handle = / oradata/ERP/RMAN_BACKUP/RMAN_ERP_20150227_15927509_1 tag = TAG20150227T040007

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: validation complete, duration: 00:02:45

  Finished post on 27 February 15

  Restore validate command also fails on the test machine:

  RMAN > restore database validation verification logic;

  From restoration to 27 February 15

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 779 type device = DISK

  allocated channel: ORA_DISK_2

  channel ORA_DISK_2: SID = 778 type device = DISK

  channel ORA_DISK_1: sweeping datafile copy /oracle/DEV/db/apps_st/data/a_ref03.dbf

  channel ORA_DISK_2: from the validation of the data file backup set

  channel ORA_DISK_2: reading of the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927510_1 element

  channel ORA_DISK_1: sweeping datafile copy /oracle/DEV/db/apps_st/data/a_txn_data05.dbf

  channel ORA_DISK_2: ORA-19870: error when restoring backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927510_1 piece

  ORA-19599: block number 233296 is corrupted in the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927510_1 item

  channel ORA_DISK_2: scanning datafile copy /oracle/DEV/db/apps_st/data/a_int01.dbf

  channel ORA_DISK_1: starting from the validation of the data file backup set

  channel ORA_DISK_1: reading of the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 element

  channel ORA_DISK_1: ORA-19870: error when restoring backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 piece

  ORA-19599: block number 45289 is corrupted in the backup/oracle/clone/DEV/rman/RMAN_ERP_20150227_15927509_1 item

  switch to the previous backup

  My confusion is why validate backupset succeeds the prod and the same backupset presents corruption block during test.

  Kind regards

  Vinod

  Maybe the backuppiece has been altered in the transfer to the DEV machine?  Run a checksum on the backuppiece on both machines and compare.

  Hemant K Collette

• RMAN does not delete obsolete files in a reliable way

  Hello experts RMAN,
  
  I have 11.2.0.1.0 on Windows Server 2003
  
  This instance IS in ArchiveLog mode. Do NOT use the catalogue
  
  Recently, I noticed inconsistent behavior of RMAN to delete obsolete backup sets.
  
  Let me give you an example: for months, I had the window of recovery set to 12 days.
  
  RMAN > view the retention policy.
  CONFIGURE RETENTION POLICY TO RECOVERY OF 12 DAYS WINDOW;
  
  Yesterday, 3/27 report obsolete showed this file:
  
  20270 23 March 12 backup set
  Total backup, 20270 F:\ORACLE\FLASH_RECOVERY_AREA\PBS March 23, 12
  \BACKUPSET\2012_03_23\O1_MF_ANNNN_TAG20120323T050002_7PRLFJ36_. BKP
  
  Today, 3/28, ran my work of simple deletion: delete NOPROMPT obsolete;
  
  Now, 2012_03_23\O1_MF_ANNNN_TAG20120323T050002_7PRLFJ36_. BKP no longer exists.
  
  Not all the files backup for 3/23 have been removed, only a small number.
  
  But why is any file 3/23 get deleted when the recovery window is 12 days?
  
  Of course, I'm afraid that my RMAN backups is perhaps not valid.
  
  Is that what someone did this experiment with RMAN on Windows?
  
  Thanks for all the ideas. John

  BACKUP VALIDATE... will not check your backups already taken.
  To do this, you need to run VALIDATE BACKUPSET or RESTORE VALIDATE that will search all the backup files needed to do a restore.

  Restoration of points must be created manually, so it's ok your results, if you have not created a.

  Concerning
  Nelson

• integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

  Hello

  I just upgraded to macOS Sierra and built-in Cisco IPsec VPN no longer works. When you try to connect, I get a "cannot validate the certificate of the server. "Check your settings and try to reconnect" error message. I use Cisco ASA with self-signed certificates and everything worked fine with previous versions of OS X.

  Please help me, I need my VPN Thx a lot

  I am having the same problem with StrongSwan and help cert signed with the channel to complete certificates included in the pkcs12 file imported to the keychain. It was working properly in El Capitan, but now broken in the Sierra.

• How can I validate authentication Firefox

  I was not able to successfully authenticate the validity of the 39 of Firefox on Mac. With the help of service tools GPG to validate gives Failed error: 153. If I make a command line "gpg--verify SHA512SUMS.asc.
  GPG: assuming that signed data in "SHA512SUMS".
  GPG: Signature made Wed 1 Jul 03:23:48 EDT using RSA key ID 15A0A4BC 2015
  GPG: good signature from "software Mozilla versions < [email protected] >" [unknown]
  GPG: Note: this key has expired!
  Footprint of the primary key: 3296 3 has 598 745th 22 5 2B, 90 06 537 8AB1 315th 992F has

      Subkey fingerprint: 5445 390E F5D0 C2EC FB8A  6201 057C C3EB 15A0 A4BC
  

  Is not valid because the public key is expired. Where can I get a valid public key? Everyone sings with success the validation of Firefox? If so, how?

  Ben Hearsum is an employee of Mozilla and blog link posted by cor - el has been in the bug report that I linked.

• Blubrry podcast not to validate

  I have a flow in Wordpress help Blubrry podcast, but I can't seem to validate through iTunes.

  Here is the power http://blogs.mtroyal.ca/teachingstrides/feed/podcast/

  The audio plays fine in Wordpress, the image is the right size and I made are without spaces in the file names.

  Any help would be appreciated!

  The problem is not with food but in the download of multimedia file of your top of the episode. Subscription in the iTunes application works OK, and if you enter the URL of the media file in a browser it plays OK, but after a slight delay.

  However, there is a redirect 302 in place, leading to the same URL, but with https (secure connection) at the beginning instead of http. In addition, under test in the Terminal it displayed the content-type that results in text/html:

  curl - I - r 200-300 http://wwwacad.mtroyal.ca/adc/teachingstrides/promo_for_launch.mp3

  HTTP/1.1 302 found

  Date: Thu, June 30, 2016 17:12:48 GMT

  Server: Apache/2.2.3 (Red Hat)

  Location: https://wwwacad.mtroyal.ca/adc/teachingstrides/promo_for_launch.mp3

  Content-Type: text/html; charset = iso-8859-1

  the 302 redirects may cause problems with some clients - please see https://en.wikipedia.org/wiki/HTTP_302 - and it is very likely that the store is down, particularly given that the redirect does not work as expected in the Terminal. In addition, the use of https can be discouraged. I suggest to put the actual file at the original URL without any redirection.

• Apple TV could not validate the Apple ID

  Apple TV could not validate my Apple ID and password

  It says?

  Have you enabled 2-step audit or 2 factor authentication?

• Validate on iCloud?

  I asks me to validate my new camera on iCloud, but I don't have access to the phone that iCloud wants to send a code. Now what should I do?

  Hello RNratched,

  Thank you for using communities of Apple Support.

  If you have no devices secured to your iCloud account that has two factors of authentication enabled, then I suggest that get you in touch with Apple account recovery:

  If you still cannot connect

  If you can't sign in, reset your password, or receive verification codes, you can account recovery application to restore access to your account. Account recovery could take a few days or more, depending on the specific account information, you provide to verify your identity.

  Get a verification code and connect with authentication two factor

  Have a good.

• The account will continue to be locked until it is approved and validate your information Apple ID. is it legitimate?

  The account will continue to be locked until it is approved and validate your information Apple ID. is it legitimate?

  Difficult to say with certainty with the small amount of data provided, but it certainly smells a scam.

• Validate Podcast page does not

  I'll put up my new podcast. Valid RSS feeds with feed validator, but when I click on the button '+' on the Podcast page to validate, nothing happens. I tried Firefox and Chrome and no work. I can't submit my podcast, if I can't get past this page.

  Do you mean the installation of Validate Podcasts connect? If so you should report them: go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• Equium L300 - how to validate Windows?

  After I put my laptop to original settings, I got a message to validate windows. When I clicked on the legend now validate windows I get a message saying that the key is incorrect. The number on the computer is different from the one on the Microsoft label on the underside of the computer.
  Vista was ok before putting the laptop back to original settings. Vista was preinstalled when I got the laptop.

  Any ideas how to validate Windows?

  > Vista was ok before putting the laptop back to original settings
  The preinstalled Vista is already activated and so activation is not necessary and is not necessary.

  I put t understand what you mean by: + I put my laptop to original settings + and Feliks you asked how you did that.

  In your case, I would just try to install the operating system preinstalled by Toshiba yet once on your laptop using the Toshiba Recovery disk or the Toshiba HDD recovery option.