On iPad 3 no wifi connection page don't pop up for internet access

Similar Questions

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

  My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device.

  Does anyone know how to get a wifi connection after reinstalling factory default DVD?

  Best is to download the drivers for a different machine, then transfer to the W3 with a USB or SD card. Once they are installed included you be back running.

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• iPad will not bring the keyboard when I try to complete an external application for internet access

  Hello

  I have a new iPad 2 Air, and very recently he began to refuse to show the keyboard properly, when I am trying to log on to an external internet account. I am traveling and need access to the internet but cannot fill all the required fields, it will bring up the top gray bar with the top and down arrow (they don't do anything, I tried pressing all there) but nothing else, just white space below.

  I have read other blogs and tried to reset the keyboard and things like that but he even let won´t let the keyboard.

  So, I can not get Internet access Login. Please help, I m new to the forum and hope I've filled it out properly... apologies if I've made mistakes here.

  Sorry I haven´t understood my operating system, but when I try to check by going to the software update, it won´t not let me because I Don t have internet.

  I suspect a lot of these errors occurred when I updated to version 9.1 of the software as it is not the only problem I encounter now, however, at this stage, it is the most frustrating.

  Thanks in advance to anyone who can help me.

  Hello Cara, there.

  It looks like that your keyboard is not appearing when it should. I'd leave the applications that are run in which you try to get the keyboard works as well as the application of the parameters:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  I think that these apps may simply need to be reset and refreshed. Thank you for using communities of Apple Support, let us know how it goes!

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• Network connection problem: «identify...» No Internet access.

  I have problems to connect to internet on my desktop Gateway FX6831.  It worked fine one day, but I turned on my PC, the other for that icon connection read continuous «ID...» No Internet access. «When you view the network information window, the intermediary between the PC and the internet just reads «Identify...» "and shows an X between it and the icon 'Internet '.  It's hard, connected to a router that is connected to the modem.  My phone and laptop PC connect perfectly to the internet through the same router and the modem.  My PC has an Intel 82578DC Gigabit network adapter.

  Some of the fixes I've tried without success:

  -Download (via my laptop) and install the latest drivers from the gateway network adapter

  -Solve the problem via Windows

  -Reset my modem (several times)

  -Hard wiring the PC directly to the modem

  -Reset my IP address via the command ipconfig at the command prompt

  I'm sure I tried other things too, but I can't think of them right now.  Help, please!

  I had the same problem and it was my pc down for 3 days and the fix was simple. I think a virus/bad windows update has caused, but not sure. All you have to do is run a system restore to a date of probably about a week before it happened. Mine took place on 18/12/11 and I ran an update 16/12/11 is not working so I chose a previous restore point that was 10/12/11 and it fixed my problem "identify no access to the network. It is very important for situations like this to have System Restore enabled, so I'll give you a link to how to do if your cannot restore to a previous point it being disabled.

  in windows 7, select:
  start or windows logo
  right click on computer and select Properties, low tab
  upper left corner select "system protection".
  then select Configure (it must be on the system protection tab if it isn't already)
  and check the restore settings and previous versions of files, and then press on apply.

  hope this helps guys

• My WiFi wireless stop working, it can only direct internet access to connect to the router.

  I have a Toshiba Satellite P205D-S7436 and cannot use the satellite (Atheros). The switch is on but no light to show that it works.

  Hi Stevenwilson,
   
  S ' it works well without any problem?
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to download and install the latest drivers for the wireless network adapter and check if it helps:
   
  Here is the link to download the drivers:
   
  Toshiba support
   
  If this does not help, contact Forums of Support from Toshiba for assistance on this issue you mentioned that the adapter does not seem to turn on.

• Connected to the wireless network but no Internet access?

  I recently got a Packard bell easy note laptop ts shows its connected to my wireless connection but when I open Internet explorer, it can not display any web page, anyone know what could be the problem? It connected correctly to my last connection Wireless at home.

  Hi,

  You did changes to the computer, before the show?

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7

  Method 2:

  Consult the following link:

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  See also,

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/Ping.mspx?mfr=true

  Note: The link above also applies to Windows 7.

• My wifi limited shows, no card wireless for internet access or access point problem

  Hi, I tried to connect with wifi, it shows connected but wrote 'limited' by the side. and below his writings no internet no access. I tried troubleshooting but it says wireless access point or no fixed adapter problem. can sum1 if you please help me with this problem

  Hi Dimma,

  What is the brand and model of your computer?

  This could be caused due to various reasons.

  -Due to the wireless router settings.

  -Due to the IP address.

  Follow the following troubleshooting methods:

  Method 1: I suggest you to reset the wireless router and check if this solves the problem manually.

  Consult the router's manual to know how to manually reset the router.

  Method 2: Reset TCP/IP and check if this solves the problem.

  Follow these steps:

  a. press the Windows key (start screen will popup), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the computer.

  
  

  Method 3: If you use WEP encryption change to WPA or WPA 2.

  Hope this helps and let us know if you need help. We will be happy to help you.

• Satellite NB10t-Arelatifs victory 8.1 - limited wifi, no internet access connection

  Hello

  so I have Windows of Satellite NB10t-a 8.1 with qualcomm atheros adapter ar956x and im getting connection is limited message, unidentified network, no internet access despite the full bars messsage.

  I have other laptops and computers that run windows 7 etc in the House connection very well.

  I tried pretty much everything that any help at all would be really appreciated.

  > I tried just about everything at all any help would be really appreciated
  and what have you tried exactly?

  Have you tried to update the driver Wlan?
  Have you tested the WLan in relation to other Wlan routers?
  Have you tested different channels WLan (1-11) and different standard WLan (802.11 A/B/G/N)
  Did you test the connection to the WiFi which is not encrypted?

• HP pavilion p184ca 15: hp pavilion p184ca 15 limited wifi connection problem after update my window 8.1 for windows 10

  Please help me to solve this problem from my computer, that my hp Pavilion 15 p184ca is now limited WiFi connection after my window 8.1 for windows 10. hope you guys can help me and I know that many more hp customers are waiting for your response to my problem. Thanks in advance guys

  Hello

  Please install WIFI drivers and restart the device

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P100-notebook-PC-series/7234915/model/7551299#Z7_3054ICK0KGTE30AQO5O3KA30R1

• WiFi connects but no internet

  I recently updated my iPhone 5 iOS to 9.2.1 and confronted to this wifi problem.

  To ANY wifi network, even after having connected and authenticated successfully, I get no internet access. Open a browser, I see an error "unable to connect to the Internet.

  I tried 3 different wifi connections and I face the same problem. (Haven't checked the internet works on the Wifi for other devices, including my laptop)

  I tried to forget the network and return home, reboot the iPhone several times. Do not reset the network settings and lose some 25 + WiFi password that I saved on my device.

  Note: the wifi never worked for me after this Upgrade.

  Try going to settings-> General-> Reset-> reset the network settings.
  It's the only way you will fix the problem probably.

• Satellite M60 guard give up WiFi connection

  An M60-144, I provided one of my clients has problems with its WiFi connection. It will be ok for 5 to 10 minutes, and then suddenly will drop the connection. Turning off the WiFi and back on again remakes the connection and everything is very well for 5 or 10 minutes.

  The access point is a Draytek Vigor 2600 G and there are other laptop (Portege R100, R200 Portege and Tecra 9000 Tecra A2) that all connect to the same access point to the same place without any problem. The AP employs 128-bit WEP encryption runs in mode 11b and 11g of mixtures. Any other potential sources of interference, for example the DECT phones have been rejected.

  The laptop has all the updates of Windows applied and drivers the most recent site. For me, it screams of a hardware problem with the wireless card, but wanted to know if there are other suggestions first?

  Hello

  I read a few topics on similar problems and in most cases, the update of the WiFi pilot solves the unstable Wi - Fi connection. As far as I know on the Intel Web site you will also find a newer version of the driver. In my opinion, you should check this option.

  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Best regards