Value Alpha may change progressively faster in a Tween?

Similar Questions

• Value Alpha may change between two keyframes?

  Hello

  Flash CS5.

  I have a splash of MovieClip Alpha 21% value in a keyframe and a few seconds later along its layer in the timeline another KF with him the 1% value

  I run the film and he remains 21 percent until it reaches the second KF when it suddenly becomes 1%

  I click with the right button between the two KFs and choose classic tween, still no difference.

  That undo and try for a motion tween, ok the con at the prompt of symbols. still no joy.

  Try for a classic Tween with...

  I see no better, a merge option so that alter to Alpha for the two MCs in the KFs.

  How can I get the alpha value to change continuously and gradually from 21% to 1% across lets say 3 dry, while 1 sec after its 14% then after two seconds its 7% etc.

  The MC itself is of a duration of 5 images, each image is a KF with whiteSpatter on a transparent basis as a .png whose size grows with each KF. If a growing number splashing effect.

  I need this fade over a period of say 3 seconds in my film scene1. I travel to a single constant value alpha 21% on my scene, but I need to change during the move to become 1% Alpha.

  Envirographics

  When tween on the timeline, you can have only one involved object and this object must be the same object from the first to the last keyframe.

• My c700 that will may change win 7 ultimate 32 bit to 64-bit

  My c700 that will may change win 7 ultimate 32 bit to 64-bit

  Hi @gujju1,

  Thank you for joining the HP Forums!

  I understand you're wondering if your HP c700 computer can be changed to Windows 7 Ultimate 64 - bit. I am pleased to see that for you!

  Yes, this computer can support 64-bit. You have to just reinstall the 64-bit version. Be sure first to backup your files .

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope that answers your question and have a nice day!

• Flag value does not change after the SCD TYPE1 column update

  Hello

  I had scd type3, type2 successfully.

  I'm trying to implement the type 1 scd.

  For this, I change slow dimension & ckm oracle the oracle select ikm.

  the source and target tables are the following. for the type 1 scd, I chose scd behavior as existing lines updated on behalf of the emp, sal columns.

  Start timestamp to join date and the current flag to flag column.

  first ename is smith when empno is 7369.

  I've updated ename

  Update scdtype1_source set ENAME = 'AA' where EMPNO = 7369

  After running, I don't have to change the flag o to 1 in the target table.

  SCD type1 mainly used for replaces old values., but I add flag column in the target table for easy identification. () column in which I updated)

  I have not any change in the flag.

  Please help me,

  Thnaks in advance,

  A.Kavya

  

  Hello

  I'm not sure what you're trying to do will work. In the case of Type 1 SCD are you still using the dimension of change slow ikm oracle? The flag is updated to 0 in the case of CDs because of the code in step 2 "' Historize old rows where CPCs flag is set to '0'.» In your case, that no new record is added in the case of an update so the IKM does not change the flag.

  I'm not sure of your requirement either. You say you want to identify the column in which you have updated. How is an indicator will tell you what the column value has been changed? Maybe you want to know which line you have updated? If this is the case and lets say you set the flag to 1 in case of update what happens when another updated same record?

  I would suggest you add an updated time stamp column to your table and set of sysdate but in properties check only the update and will not insert. What that would do is update your record, it will fill the current date and time so that you can identify that this record has been updated.

  If you want to always go for the flag, then follow the same approach but in your mapping, change the value of the flag to 1 instead of 0 and new check only the update box (uncheck the box insert). In your create table statement the default value of this option to 0. So when the new line is inserted database is automatically assigned the flag to 0 and where there is an update, ODI it will change to 1.

  Thank you

  Ajay

• What values can I change to increase the speed of mouse wheel?

  It seems that there are a couple of entries that you can change to increase the scrolling speed:

  -mousewheel.default.delta_multiplier_y

  -general.smoothScroll.mouseWheel.durationMaxMS

  -mousewheel.enable_pixel_scrolling

  -mousewheel.min_line_scroll_amount

  -mousewheel.acceleration.start

  I don't know if there's more available however, the ones I tested.

  As a result, whose entrance is the best editing to increase scrolling speed?

  This is the meaning in which you want to scroll:

  x: horizontally
  y: vertically
  z: only applies if you have a 3D capable device
  

  Normally, you would like to set the value of y for scrolling up and down.

• Opacity value of value of hue change spot color

  Does anyone know a script to change all spot color objects that have an opacity value of the corresponding value of the color of the spot color? Could also be to treat the colors, global or not - but the key is to work.

  
  

  If an object uses a spot color that is to say 13% opacity, then it must be on opacity 100% and the value of 13% spot color tint. If an object has been 75% opacity, then it must be set to the hue of 75% to 100% opacity etc. Throughout the tonal range for all objects.

  
  

  It would be nice if the blending mode of the spot color has been set to normal if it was something else (obscure, product etc.). I guess it would be great if there was an option to set the object for a collection if the blending mode used was darken or multiply, but this is the icing on the cake. Essence is the opacity value of spot object of the value of spot color mapping and setting the opacity to 100%.
  

  
  

  I would have thought it would be a problem quite common in packaging prepress, however I had no success in the search for such a script.

  Here's a more complete script.

  delivered in a function of maintaining the overall space.

  and should be in RGB, CMYK and Spot colors.

  I would like to know if you find it does unexpected things...

  function RemoveOpacity(){
      // to work on selected items only set to SEL
      // to work on whole document set to ALL
      var work_on = "SEL";
      //---------------------------------------------------------
      var doc = app.activeDocument;
      if(work_on === 'SEL'){
          var items = doc.selection;
      }else if(work_on === 'ALL'){
          var items = doc.pathItems;
      }else{
          alert('the "work_on" variable is not set correctly');
          return;
      }
      for(var i = 0; i		   

• Impossible to reset the value of the variable to the value of the change event method and use

  Hello
  
  int i = 4;
  ChangeValue is public (ValueChangeEvent ValueChangeEvent)
  {
  a code
  I have = 5;
  System.out.println ("in the method ChangeValue =" + i) / / this impressions I like 5
  }
  public void submit (actionEvent ActionEvnet) {}
  
  somecode
  System.out.println ("submit =" + i) / / This displays the value 4; Although its value is modified as 5 to above method
  }
  
  How can I get the value I have = 5 in the second method (IE, to present the method)?

  Change it to display the scope and your problem will be solved... or you can store the value in a view or session Variable :)
  for example.

  ADFContext.getCurrent () .getViewScope () .put ('itemName', i); to set the value
  String valueOfi = ADFContext.getCurrent () .getViewScope ().get('itemName').toString; to get the value

  Or via a session scope

  ADFContext.getCurrent () .getSessionScope () .put ('itemName', i); to set the value
  String valueOfi = ADFContext.getCurrent () .getSessionScope ().get('itemName').toString; to get the value

  :)

• The selection list value does not change when the page is sent

  Hi all
  
  I have a selection list that acts as an entry for the report. the page is submitted using a button.
  The button uses the branch option "redirecting to page in the application. I select the same page.
  
  The problem is when I change other values in the value list always takes the first value
  
  I want to know if the problem is with the key or select list. What should I do about it?
  
  Concerning
  REDA

  Renon wrote:

  I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
  so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

  The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

  ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

  Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.

• Why the color values do not change when you use proof colors?

  Hello

  I am very interested in getting accurate replicas of the image on the screen (in ProPhoto) and the image (using a suitable printer profile). However when I choose test colors on the display menu, changes in appearance, but the colors RGBV or laboratory remain the same. It is against intuitive and goes against the well known for color recommendation to correct using numbers instead of your eyes.

  What is going on? Is there a way to accomplish what I want?

  Thank you

  Juan

  Not quite what you want, but the info panel can be configured to read the evidence values.

• "All the values in column" change in the dash prompt

  In OBIEE 11 g, how to change the dashboard prompt label everything value? I don't want to change the value in the XML file, because it will prompt value impact all the dashboard.
  This is there best method to implement this problem?
  
  For example:
  In prompt dashboard-> edit-> options-> check ' include "All values in the column" in the list ", so I can display value"(toutes les valeurs de colonne) ' in the command prompt. " Customers want to change this value, such as 'all values '. Is this possible? Thank you.

  Hello

  Can do this by using Union All is prompt, SQL and variable presentation in the report.

  Reference: http://www.varanasisaichand.com/2010/01/editing-all-choices-in-dashboard.html

  Kind regards
  Srikanth

• Form fields values level how chang

  Hi...........
  
  I want to change the values of the fields
  
  Here the name of the field-> mtl_eam_asset_attribute_values Depr_method (table name)
  
  Values-> DB, SLN (methods)
  
  I want to change DB to "Depreciation_method", another a SLN to 'Method of the Stright line' at the form level how
  Please give me a solution.
  Forms 10g
  
  
  Concerning
  Maha

  Hello
  I think that you posted the same question in another thread. Its best to maintain a single thread for the same topic.
  you have block db?
  If yes then you have two options
  1 item in the list as suggested earlier.
  2 control point. While in the post and when-validate-point of the iem, you can assign the corresponding description.
  If your block is not a db block, then you can use decode function when filling the data in blocks.

• Its value cannot be changed when AF:inpuDate is set to a managed bean method

  Dear gurus,
  
  I have a date field. MinValue I want to set the default value of the value at the date of the day but also be editable by the user.
  I put its value to a managed bean, odes, which returns the current date in java.util.Date type.
  The value is displayed correctly, but the field is not editable.
  
  The field that IS NOT bound to any attribute of the entity.
  
  I searched the internet and this forum, but I have found no solution to this simple question.
  
  Any help appreciated

  Dimitris,

  You have the value of the element associated with a bean called 'currentDate' attribute, but there is no Set accessor for the property. Where you expect the value to check if the user has changed the value? You would need a method "setCurrentDate()" in your bean for the editable field.

  The get/set accessor you showed us (get/setStartDate) are for the instance of the component, not its value

  John

• Field values for text changes 'true' when I click on submit by e-mail button

  I have a logic in my button send email to determine who should receive the form based on the information contained in the form.  Based on my sample code, when I click the submit by e-mail button and TextFiel4.rawValue's D781008CX03, it will really change the value in TextField4 to "true" when you submit the form.  What can I do to solve this problem?

  If

  (TextField4.rawValue = 'D781008CX03' & & CheckBox10.rawValue == true) { }

  var myDoc = event.target;

  () myDoc.mailDoc

  false,

  [email protected]

  , "" , "" ,

  "Add request of.

  + FuelRating.rawValue

  "You have a new industrial request to add.

  + FuelRating.rawValue

  );}

  Hello

  In your test for TextField4 you are missing a second equal sign:

  if (TextField4.rawValue == "D781008CX03" && CheckBox10.rawValue == true) {
       // script
  }
  

  Hope that helps,

  Niall

• Help! Why the value is not changed?

  ViewStack index = 0 (homepage), I pass the object of investments (index = 1) when I click on an item in the datagrid control.  The temporary name is set to that past from the home page.

  When I go back to the home page and click on another article on datagrid, I want the new value go to the courses page, but the first item data are still on the locations. How do I update it?

  
  

  I need the value (text)

  TextInput id = "txtName"on page placement page of changes which I attribute to the House.

  See below
  

  [Bindable] public var objPlacementMain:Object = new object;

  private function gotoPlacements(event:ListEvent): Sub {

  ce . objPlacementMain.name this=. dg.selectedItem.col1;
  ce . homePlacement.selectedIndex = 1;
  }

  
  

  < mx:ViewStack id=" homePlacement ">
  < mx:V
  

  < mx:DataGrid id=" dg "itemClick ="gotoPlacements (event)" >
  < mx:columns >
  

  < mx:DataGridColumn " headerText =" Column 1 "dataField =" " col1 " />

  < mx:DataGridColumn " headerText =" Column 2 "dataField =" " col2 " />

  < mx:DataGridColumn " headerText =" Column 3 "dataField =" " COL3 " />

  < / mx:columns >

  < / mx:DataGrid >
  

  < h:placements

  ' objPlacement = ' {}objPlacementMain} " " / > "

  
  

  < /> mx:ViewStack

  investments

  
  

  .......

  
  

  [Bindable] public var objPlacement:Object = new Object;

  ..........
  

  < mx:HBox

  " width = ' 100% "height =" " 30 " >

  < mx:Spacer " width = ' 48 "height = » 25 " />

  < mx:Label " text = ' Name "fontWeight =" " "BOLD" "width =" " 51 "" / > < mx:TextInput id = "txtName" text ="{this.objPlacement. }" " nom }"largeur = »193" editable = »faux"/ >

  < / mx:HBox >
  .......
  
  

  In your post, I am not in front of "public class"

  bindablePLacement ".  You should always get warnings of liaison.

• Report with values inside layout changes

  I there a standard report, but I want some state lines is displayed in red if the value in the row is null.
  I know that you need to use different templates, but how and where should I put the condition of change report row models?
  
  
  Thank you

  Use several models of row/column (there are up to 4 available in a report model), control which is used by the line/column model 1 Condition and row/column model 1 Expression etc., depending on whether it is a model of column named (line) or a generic column template.

  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/themes.htm#BABFFGGJ