Value to round variable?

Similar Questions

• value of the variable 'keep '.

  Hello world!!

  An applescript noob here!

  I'm trying to create a script using Automator to "find and replace" name of my client always in the same file in Textedit, so I can use this text by only to replace every time the name of the customer. (as a model)

  So far, I got this:

  display dialog "which is the name of your client?" default answer «»

  Set cst_name to text returned of the result

  dialogue box "are you sure you want to change it?

  Global customer

  the value customer cst_name

  Tell application "TextEdit".

  -Find and replace

  the value of each word in the document before where it = 'CSTX' to the customer

  tell the end

  My problem here is, of course, when the text 'CSTX' changed once using the scrip he is not called CSTX more, but the name I just enter in the dialog box guests.

  Is there a way to 'keep' the value of this variable so I can run this script as often I do.

  Do you guys think that this is an easier solution for this?

  THX in advance!

  If the first instance of it will always be in the same place of the document each time, you can get it with:

  Tell application "TextEdit".

  Words from 5 to 5 of 1

  tell the end

  (142371)

• How to set the value of a variable in automator?

  I'm totally new to automator I found a post that I try to reuse

  to Re: copy multiple files from TextEdit in one Word file

  I want to open a series of html files in a folder and convert in a TextEdit rtf file.

  However, I am unable to automator find out how set the value of a variable such that it appears in this post

  I looked at every command in library without a lot of fortune

  Any help?

  Thank you

  Dan

  Its in Utilities.

  In Automator, use the search box:

  

• How to control the value of a variable that is shared at the beginning of the vi

  Hi all

  In short: How can I make sure the values of the variables shared at the start of a vi?

  I have two vi.

  One is a main vi where did I order a shared Boolean variable "run DAQ".

  The other is a vi with a while loop that "polls" for the shared variable "Execute DAQ", which is connected to a box Structure. If the case is false, it does nothing, if it is true is short some simple IO DAQ within a while loop.

  To be sure that at the beginning of the vi the variable 'Execute DAQ' shared value false (no matter what 'State' the shared variable was left in front of the vi began) I write a Boolean constant to this shared variable 'Execute DAQ' out of hand while loop.

  Now my question: how is it possible that the case structure can enter into the 'True' State, even when main vi is not executed and there is therefore no way of the shared variable can be written in. I know that shared variables are stored in memory, but that's why I write it to false at the beginning of the vi.

  Even when I read the first shared variable before you change it with a constant False the second instance of the shared variable that is wired to the case structure bed to True.
  It seems to me that the shared variables do not follow the 'right' of the dependence of LabView and are updated outside the normal flow of the vi.

  Thanks for your time and advise on this.

  JackT wrote:

  Someone knows another way around this?

  Yes.  Do not use them.

  If you not post on a network, use a normal Global Variable or use a queue, the user event, stating to send commands indicating loops for updating their values.

  If on a network, then I recommend the network stream to send commands/data back with updates.  I used shared variables, more I hate them.

• Monitor changes in the value of a variable in a module of code labview TestStand?

  Hi all

  A code in Labview module called from an action step has a particular variable that changes its value when running vi. Is it possible to monitor these changes through for example a local variable in TestStand and display different values on UI in real time via UIMessages?

  Thank you very much!

  You must post a UIMessage during execution of your VI.  As the following picture below, you can ignore the SequenceErrorMessage string and use the value of your variable as the numericDataParam.   I guess the trick is to determine where to display the user interface of Message, in your case, the variable updated at certain times or it he constantly updated?  I'm not sure of the performance LAG if at all times you post a UIMessage say every 100ms.

  

  On the other end, you will need in your interface user create a reminder of the Interface to manage the UIMessage.  See the following link for more details.

  http://www.NI.com/white-paper/4532/en

  Enjoy,

  PH

• TestStand 2012 keeps the value of the variable

  I have a problem with TestStand 2012 that preserves the value of the variable. I have a step and its parameters in the string variable. I use the expression step as Step.Settings += "00". I run the sequence under sequential model and the problem is that Step.Settings is equal to "00" on the first run, '0000' on the second throw, '000000' on the third race and so forth, but it must rest '00' on each race. I can't find the root cause. Anyone has the same problem and can advice how to solve?

  Try to uncheck the properties of the sequence > optimize reentrant calls to this sequence to the sequence that contains the step.

• Assign a value to a variable

  Kind of a matter of newbie here.  In TestStand, I use an action (ReadTemp see table) to call a .vi who reads a temperature of a sensor.  One of the parameters in action (the return of the vi) is the value of the temperature as a DBL.  I would attribute this numerical value to a variable FileGlobal to decide at what stage of test that is run then.  It doesn't seem like this should be difficult, but I don't know how to do it.  Any help would be appreciated.

  I can't read your attachment for the moment, but I noticed that you use TestStand 4.1

  Then you should be able to set the output of your VI connection your FileGlobal, but please make sure that you have connected to this output in your VI to the part of the connector of the VI. Back to TestStand SeqEditor, if you do not see this connection try to make a prototype of reloading.

• Get the current value of the variable when reaching CNVCreateSubscriber

  I use CNVCreateSubscriber () to create a subscription read to a network Variable: whenever the value of the variable changes, the DataCallback is called and I'm able to get the new value of the variable.

  But how to get the value of the variable when a subscription is created?

  I read in the help CNVCreateBufferedSubscriber () returns this information, but I wonder if using CNVGetDataFromBuffer () in a polling loop has the same performance as the approach to DataCallback of CNVCreateSubscriber ().

  In addition, the dataStatus (CNVGetDataFromBuffer) parameter is different for different Subscribers? (that is if I have multiple subscribers, CNVStaleData is related to the specific Subscriber or is a global property of the variable)?

  CNVData data;

  CNVGetConnectionAttribute (customer, CNVMostRecentDataAttribute, &data);)

• How to read the values of the variables of façade in loops without using local variables or property value nodes?

  I know that local variables and nodes of property value are causing a lot of problems.

  But if I read the value of a variable front outside a loop.

  the value is only read once before the start of the loop.

  Changed the front variable values during the iterations of the loop, is invisible.

  How can I solve this problem?

  
  

• Save the value of the variable on rising

  Hello

  My setup is quite complicated (and does not work properly yet)... anyway, I give all of the code.

  What interests me now is to learn how to save for later use the value of the variable 'Bias' on a rising "min. . found.

  The 1st idea coming is to create another case of event for changes "min. Found" , where to save in a registry change, but the problem is "min. Found" changes fires on the edges and falling .

  Thanks in advance

  Pavel

  

  Pavel_47 wrote: but the problem is "min. Found" changes fires on the edges and falling .

  It's actually worse than that.  Change value Min found fires with all writing, regardless if the value has changed or not.  It's one of the dangers of the use of the Value property (signs).

  Do a Boolean search PtByPt crossing.  It's a useful for this situation VI.  It will display a TRUE with the edge that you tell him.  After that, just use a case structure and make any desired calculations in it.

• change in value of the variable periodically

  Hi all

  I want to change the value of the variable periodically such as on the front panel, initial, final and incremental value must be defined by the user and the variable value changes automatically after every 5 seconds. and I want also the time interval should be set by the user on the front panel. How is that possible?

  Any help will be greatly appreciated

  Take a look at the attached simple project.  You can change all the values on the fly.  Change the initial value or the value of interval timer are asynchronous to the timer (the changes are made as soon as the user changes the value in the user interface).  The other values are updated only when the timer clicks.  The difference is that I have added reminders to the initial value and the interval timer value.  Given that these other values are used that when the timer clicks, they didn't need reminders.  Their values are used in the callback of the timer.

  I added a callback for the timer interval allow an operator to correct an error.  For example, if they wanted to wait for 10 seconds, but they came in 100, with the reminder, they do not need to wait 100 seconds before the timer is updated with correction.

• Name of the dynamic property of object in the table based on the value of a variable

  I have two paintings of custom class objects

  var obj1:Object1
  var obj2:Object2
  
  var array1:Array = [obj1[0], obj1[1], ...]
  var array2:Array = [obj2[0], obj2[1], ...]
  

  Object1 has a property named. Name while Object2 has a property named. Title.

  Now I have a common function including cab accepts an array (array1 or array2) and the name of property the object ("Name" or "Title") as input and needs to access this name of the property of the objects in the array:

  function myFunction(arr:Array, fieldName:String)
  {
      arr[0].fieldName  = "xxx";
  }
  

  the problem I have this achievement does not because the code in the function assumes that the property of that object in the table is actually a string "fieldName" while I want to dynamically determine the names of the fields based on the value of this variable, but cannot understand the syntax to do!

  Don't know if I'm clear - hope that makes sense... ;-) Thank you

  Hey p3pp3r,

  I think I understood you. Try the following and see if you get good results:

  function myFunction(arr:Array, fieldName:String)
  {
      arr[0][fieldName]  = "xxx";
  }
  

  Let me know how it turns out. Good luck!

• Gettting ODI-17511: no value to the variable. ?

  Hi all

  I am facing an error when executing a Package to load all dishes unique to Oracle DB folder files.

  The thing is that I am able to load data but it's operator error display "no value to the variable ' MULTI_DEMO." "File_name'"

  Details of my project are:

  PROJECT_NAME: MULTI_DEMO

  Name of the interface: MULTI_TEST

  Have 5 text files in my folder of the source code. and the target is created as the same schema as the source

  variables: filename, County, Files_Count

  statement = file_name

  DataType: alphanumeric

  Keep history: last value

  Request used:

  SELECT FILE_NAME FROM (SELECT FILE_NAME, SRC_FILE_DETAILS RN ROWNUM)

  WHERE RN =' #MULTI_DEMO.count '

  statement = count

  Data type: digital

  Keep a history: last value

  Request used: nothing

  statement = Files_Count

  Data type: digital

  Keep a history: last value

  Request used: select count (*) in SRC_FILE_DETAILS

  I have clearly chosen patterns appropriate for the two variables with queries.

  in the Package diagram:

  step 1: count = 1 assign (type: set variable) {-> File_Name and failure success: END}

  step 2: filename (type: Refresh variable) {-> multi_test success and failure: END}

  step 3: multi_test (type: flow (interface)) {success-> count and failure: END}

  step 4: count increment = 1 (type: set variable) {success-> Files_Count and failure: END}

  step 5: Files_Count (type: Refresh variable) {success-> count and failure: END}

  step 6: County (type: evaluate the variable) is operator " > = " value is "MULTI_DEMO.count" {success-> File_Name and failure: END}

  
  

  Please find below the picture for flow diagram

  

  I have changed the stage names, hope you find my reviews.

  
  

  Please help me to sort out this error.

  I use OBIEE 11.1.1.9
  

  
  

  The error is in short:

  
  

  java.lang.Exception: ODI-17511: no value to the variable ' MULTI_DEMO. File_name'.

  at oracle.odi.runtime.agent.execution.sql.RefreshVariableExecutor.execute(RefreshVariableExecutor.java:70)

  at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)

  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.processTask(SnpSessTaskSqlV.java:410)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2637)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask(SnpSessTaskSqlV.java:240)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:380)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:312)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:304)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:874)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:133)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:84)

  at java.lang.Thread.run(Thread.java:662)

  I repeat, "I am able to load data but always error in the last step.

  Thanks a mllion.

  Shakur

  

• Access a value to a variable which is a bean to any place in the application of adf.

  Hello

  I am very new to the ADF.   I'm fighting on access to a variable in another form of bean a bean. My script is as below.

  I have a stubborn workflow. He has a page that has a text field and a button. I have a bean that brought the application. The bean has action method setTextInput(). When the user enters text in the text field and click on butoon methd of bean is called. I am able to get the text entered in my method of bean. I want the text user enterd the value value in a variable of the bean and its value access from ANY WHRE we will ' say to another bean of scope of the request in the workflow of the application of the adf. So could you please help me on this. It is very urgent. I think that this is a common use case.so adf expert can help me easily.

  --

  Your idea is to store the user on a bean to support State, and is not exactly a best practice in the ADF, if you are using business components.

  You can create a transitional field in one of your ViewObjects and in this way, you can access the value from anywhere in the application.

  Creation of an attribute of the transitional View object is simple, you can find an example here:

  http://oralution.co.uk/site/2013/08/07/ADF-tutorial-transient-attributes-and-how-to-populate-them-part-1/

• How to display the value of the variable for bottom of pl/sql

  How to display the value of the variable for bottom of pl/sql

  declare

  V_1 number: = 10;

  V_2 number: = 20;

  V_3 number: = 30;

  v_4 number: = 40;

  v_5 number: = 50;

  test varchar2 (100);

  Start

  I'm in 1.5

  loop

  test: = "v_" | I have;

  dbms_output.put_line(i||) e > ' | test);

  end loop;

  end;

  /

  How to get below output:

  1 > v_1

  2 > v_2

  3 > v_3

  4 > v_4

  5 > v_5

  But I want to output of

  1 > 10

  2 > 20

  3 > 30

  4 > 40

  5 > 50

  Hello

  You cannot reference variables as you did and get the value of the variable. Use pretty collection.

  set serveroutput on size 2000
  declare
    type      number_table is table of number;
    numbers   number_table := number_table(10, 20, 30, 40, 50);
  begin
    for i in numbers.first .. numbers.last
    loop
      dbms_output.put_line(i || '->' || numbers(i));
    end loop;
  end;
  /
  
  anonymous block completed
  1->10
  2->20
  3->30
  4->40
  5->50
  

  See the Collections of PL/SQL and Records http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/composites.htm#LNPLS005