Similar Questions

• How to use DBMS_RANDOM. VALUE to generate the specific numbers

  Hello
  
  I need generate numbers that are only in '120, 121, 130, 155, 198. Would it not possible to use DBMS_RANDOM. VALUE to do and how?

  SQL> select trunc(dbms_random.value(100, 200)) from dual connect by level <= 10;
  
  TRUNC(DBMS_RANDOM.VALUE(100,200))
  ---------------------------------
                                145
                                155
                                180
                                186
                                169
                                107
                                110
                                194
                                119
                                169
  
  10 rows selected.

  Thanks in advance!

  Something like this:

  WITH my_values AS (SELECT '120,121,130,155,198' AS ST FROM DUAL)
      SELECT SUBSTR (my_values.st, TRUNC (DBMS_RANDOM.VALUE (0, 4.999)) * 4 + 1, 3)
        FROM my_values
  CONNECT BY LEVEL <= 10;
  

  Basically, you need a way to use the DBMS_RANDOM to choose which item of a list that you want. But you can't use DBMS_RANDOM to generate the list items themselves.

• Count the horizontal value and generating date

  using oracle 9i.
  
  I have a table named test which presents
  

  Eno     pct1     pct2     pct3     pct4     pct5     sal_date
  101     0     100     0     100     100     03/01/2010
  102     0     0     100     100     100     14/02/2010
  103     0     100     100     100     100     24/01/2010

  for the first line, we have two zeros for pct1 pct3, so two records to be generated for the 01/03/2010 and as well next week
  

  Eno     pct1     pct2     pct3     pct4     pct5     sal_date
  101     0     100     0     100     100     03/01/2010 (2 Zeros,two weeks to b generated
  101     0     100     0     100     100     10/01/2010
  102     0     0     100     100     100     14/02/2010(2 Zeros,two weeks to b generated
  102     0     0     100     100     100     21/02/2010
  103     0     100     100     100     100     24/01/2010(one Zero,one week to b generated

  create table test
  ( eno number,
    pct1 number,
    pct2 number,
    pct3 number,
    pct4 number,
    pct5 number,
    sal_date date);
  
  insert into test values
  (101,0,100,0,100,100,to_date('03/01/2010','DD/MM/YYYY');
  
  
  insert into test values
  (102,0,0,100,100,100,to_date('04/02/2010','DD/MM/YYYY');
  
  insert into test values
  (103,0,100,100,100,100,to_date('24/01/2010','DD/MM/YYYY');

  Can u pls help out me
  
  Thanks in advance
  
  Published by: user12093849 on 28-Sep-2010 00:13

  Kaila Mahesh wrote:

  select ENO, PCT1, PCT2, PCT3, PCT4, PCT5,SAL_DATE + (cnt - 1) * 7 SAL_DATE  from
  (
  select ENO, PCT1, PCT2, PCT3, PCT4, PCT5, SAL_DATE,
  sum(
  case when PCT1 = 0 then 1 else 0 end +
  case when PCT2 = 0 then 1 else 0 end +
  case when PCT3 = 0 then 1 else 0 end +
  case when PCT4 = 0 then 1 else 0 end +
  case when PCT5 = 0 then 1 else 0 end
  ) over (partition by (eno)) cnt
  from test
  ) 
  

  Kind regards
  Kaila Mahesh

  Hmm, produces only 3 lines, rather than the required 5...

  SQL> select ENO, PCT1, PCT2, PCT3, PCT4, PCT5,SAL_DATE + (cnt - 1) * 7 SAL_DATE  from
    2  (
    3  select ENO, PCT1, PCT2, PCT3, PCT4, PCT5, SAL_DATE,
    4  sum(
    5  case when PCT1 = 0 then 1 else 0 end +
    6  case when PCT2 = 0 then 1 else 0 end +
    7  case when PCT3 = 0 then 1 else 0 end +
    8  case when PCT4 = 0 then 1 else 0 end +
    9  case when PCT5 = 0 then 1 else 0 end
   10  ) over (partition by (eno)) cnt
   11   from test
   12  )
   13  /
  
         ENO       PCT1       PCT2       PCT3       PCT4       PCT5 SAL_DATE
  ---------- ---------- ---------- ---------- ---------- ---------- -------------------
         101          0        100          0        100        100 10/01/2010 00:00:00
         102          0          0        100        100        100 11/02/2010 00:00:00
         103          0        100        100        100        100 24/01/2010 00:00:00
  
  SQL>
  

• [Disposal] values not generated after the default of Consolidation in HFM

  Hi all

  I'll put up my applications using default consolidation intercompany transactions and rules of elimination; but I do not see members [removal] is met. The account of the form does not appear unlike intercompany balances. Since I'm on default consolidation & elimination I suspect it must be a problem in the configuration of metadata.

  Configuration of account: Two put accounts in place for transactions intercompany-SalesInterCo & PurchasesInterCo; and one account as PlugAccount-PlugSales

  -SalesInterCo (type of income, yes marked PKI with plugaccount as PlugSales, upper limb PKI [PKI entities], custom1top as BU_TOT Member, custom remains as [none])

  -PurchasesInterCo (type of expense, marked Yes for PIC with plugaccount as PlugSales, ICP upper limb [PKI entities], Member of the custom1top like BU_TOT, custom remains as [none])

  -PlugSales (marked No. for PIC, is calculated - Yes, IMember superior CP [PKI entities], custom1top as BU_TOT, Member custom remains as [none])

  Hierarchy of entities- All basic features have active IsICP and currency as default EUR C935 parent entity default currency USD.

  

  For the initial setup of the PKI.

  1 - creation of reason codes

  2 - open the period - Jan, year-2014, scenario-real

  3 created the transaction between entities C230 and C812. (Rule of transaction created, validated and deployed for PKI transactions)

  4 - transactions (I created transactions in both entities) close

  5 - the posted transactions

  6 run the consolidation on the entity Parent-C935

  The screen below shows the blank values [disposal]...

  All that I'm missing?

  

  Suggestions?

  Thank you

  Rajani.

  Hi all

  There was a stupid mistake. -SalesInterCo and PurchasesInterCo - accounts have not enabled for Consolidation. In addition, property of The ICP_Top member on behalf of plug-PlugSlaes - went under [ICP_Entities] [ICP None].

  After these changes and redploying enforcement, I made a 'Contribution to calculate the Force' and ' consolidate all data "at the parent level. Now, I am able to see all the numbers correctly.

  Thank you all for your contributions.

  

  Thank you

  Rajani.

• Number of days where the value > a certain amount

  Hello

  I have a table named named MSR_3423:

  

  I want to count the number of days where the VALID_VALUE is > to 0.001

  I made this request, but it gives me that result a count of every time that this value has been found in a day:

  select trunc(valid_date), count(*) from MSR_3423 
  where raw_value > 0.001
  and   VALID_DATE IS NOT NULL
  group by trunc(VALID_DATE)
  order by 1
  

  It gives me this result:

  

  But I want the number of days when this value has been reached. In this example, the result should be: 5 (for 5 days)

  I think there must be a dower to do, but I'm not experienced enough to achieve this goal. Could you help her?

  Thank you.

  You almost have it. Just put another county around your account.

  select count(*) from (
  
    select trunc(valid_date), count(*)
    from MSR_3423
    where raw_value > 0.001
    and  VALID_DATE IS NOT NULL
    group by trunc(VALID_DATE)
  );
  

  or shorter but sometimes confusing

  
    select count(count(*))
    from MSR_3423
    where raw_value > 0.001
    and  VALID_DATE IS NOT NULL
    group by trunc(VALID_DATE) ;
  

  Logic of Alvertos did the same thing. He's just using SEPARATE instead of GROUP BY. But since I do not SEPARATE, I wanted to show a different way.

• that will generate the hash value

  Hello world
  
  I need some information about the hash value is generated for each new SQl
  
  I think that PGA will generate a hash value every time
  
  Thanks in advance
  Shareef

  912856 wrote:
  Hello world

  I need some information about the hash value is generated for each new SQl

  I think that PGA will generate a hash value every time

  PGA 'would lead to' value? Is it not that the hash values are generated by the hash functions ? If you want information on the analysis of works, please read.
  http://docs.Oracle.com/CD/E11882_01/server.112/e16638/optimops.htm#i21299

  And,
  http://docs.Oracle.com/CD/E11882_01/server.112/e25789/sqllangu.htm#CNCPT1740

  Aman...

• HP Envy x 360 15-aq000nb QWERTY: azerty keyboard driver bug for <>------generating ctrl instead of mapping

  "Nine" HP Envy x 360 with Belgian azerty keyboard

  2 right of the space bar, marked as <>key positions-generates these values, but generates the code for the CTRL key instead.

  This may be a virus or other problem, because it is a new system "comes out of the box". I really suspect of a "Bug" here to test available for this particular model azerty

  The keyboard driver is standard supplied with the operating system of microsoft, called "Belgian Azerty comma.

  The operating system is on the last patch level

  HP drivers are on the last patch level

  I guess it must be declared as 'a problem' and not an 'incident '.

  See you soon,.

  Stefan

  An update on this:

  The keyboard permanently sends the keyvalue 'CTRL RIGHT'. I wouldn't not because in the majority of keyboard layouts, the button to the right of the "ALT GR" is indeed the RIGHT CTRL. But not on this Belgian AZERTY keyboard. He the key on this post is marked > <------(you access the backslash pressing alt gr with the key, you access the > organizing the passage)

  So I guess it's a problem of HP and a defect of product in a lot of these PC.

  I used after derivation of the to solve for me (but I guess there is still a bug for HP):

  Using the free software SharpKeys. http://SharpKeys.codeplex.com/
  I remapped in the registry (E0_1D) right CTRL key 0 x 0056 (00_56)

  This solved it for me.

  Hope that HP takes knowledge to check if there is a production fault in this batch of HP envy

  See you soon,.

  Stefan

• Generation of the table of all values of 30 at a time

  Hey, I measure all 30 temperature both values and generate the table of values of 30

  every minute...

  How to extract a 30 value at the same time and at the same time! I'm a problem inside!

  Here is a version with simpler data structures. Maybe this can give you some ideas.

• How to determine the number of highlight ' to write ' for DAQmx generate analog output?

  On the configuration of the stage for DAQmx generate analog output, there is a field "value to write.  I can't find any explanation for what it is, how it determines the value to enter, nor what he writes.  I am trying to go through the tutorials and it cling.

  Someone would give an explanation?

  Hello

  To write value specifies the value to write in the channels, lines or ports selected in string parameters. In other words, this value will be the value of your DC output (for example if you enter 5, your output will be 5V). To get information on different fields in SignalExpress, access help"context-sensitive help. A pane will appear in your work environment that displays the coordinates of the field when you place your pointer over them.

  For new users of SignalExpress:

  Generation of DC signals with NI DAQmx devices: step in the DAQmx build, select 1 sample (on request) in the generation Mode dropdown. You can select a programmatic input to generate, or you can remove the check mark from the check box use programmatic input and specify a value for generating in the field of value to write . NOR-DAQmx help also provides additional information about the data generation.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

• PXI-4461 generate voltage update

  Hello

  When you try to run the sample Daqmx VI "Gen - Update.vi of tension" with an NI PXI-4461, I get the following error:

  200758 error:

  "Type of sample Timing is set to on demand that is not supported for analog output on this unit"

  What does that mean?

  Is there another way to generate a constant DC signal with the 4461?

  Also - for next time that consider us to buy a new card - where can I get information on DAQmx properties (like this one) are supported for each camera?

  Thank you

  Ran

  Hi Ran,

  The 4461 NOR supports HAVE no single-point / AO of because it is based on delta-sigma converters a/n/CED, which require a clock free run at a constant speed.

  There are two ways to output a signal DC with an NI 4461 (or NI 4431):

  1. Continuously to generate a waveform to DC (containing several repeated values).
  2. Set channels DAQmx > AO. IdleOutputBehavior to "Maintain the existing value" can generate several updates.

  The help of LabVIEW has a page of "properties of the NI PXI-4461 supported", but it does list all the supported values for each property for each device. NOR-DAQmx help has a page entitled "Considerations for DSA timing devices" that talks on this subject:

  "

  Considerations of timetable for DSA devices

  Supported sampling frequencies

  Unlike some other devices DAQmx, DSA devices have a maximum and a minimum sampling frequency. Check your device specifications determine the range of sampling frequency.

  Other considerations of DSA calendar

  DSA devices do not support the type of synchronization on demand. All acquisitions of DSA and generations require hardware timing of a stable clock.

  DSA devices do not support external synchronization sources of arbitrary external signals such as tachometers and encoders. PFI lines on the DSA hardware can accept external clocks. You can program a DSA device to use an external clock only when it is a slave in several synchronized system device. Refer to synchronization of the DSA for more details.

  "

  Brad

• Search for the string in the string table and see the following value in the line

  Hi, I'm new I have LV and I do a Vi that read worksheet values and generates 2d channels of the same spreadsheet table. For the moment everything I need is a function that find specyfic string in this table and show the next value in a line. As:

  Table:

  a; b
  c; d
  f; g

  example: find the 'c '.

  VI shoud show "d".

  Concerning

  Not a bad homework problem.  Do it with pencil and paper.  Write your table and pretend you're the computer.  What you want to do (step by step)?  What questions do you have?

  Now that the translation a bit to computers.  You mentioned that the data is in an array of strings.  What structures (LabVIEW) work with tables?  [Do you know how to work with tables?  [Otherwise, review some of LabVIEW Tutorial material - see top right of the first page of the Forum].  What do you know about channels?  What questions you need to ask questions on the channels?  What do you know about string functions?

  Watch these things in some LabVIEW code, 'feed' some data and see what he does.  If it seems to do things "unexplained", you can try to look at the block diagram to run by turning the performance highlight (and if you don't know what that means, use the help of LabVIEW and see the tutorials).

  Bob Schor

• 6534 PCI for digital output finished generates a continuous output

  Hello

  I use 6534 PCI for my application, where I generate a digital output, a model finished variable length in a continuous loop.  the code runs without error, but I'm not able to justify the behavior of the map. I intend to use the code inside the while loop as a Subvi and if I change the 'command' at the entrance table during each call to the Subvi, the output should vary according to the directives of the entry of the 1 d array.

  But this is not the case, the loop displays the previous value that has been given to Scripture DAQmx. If the control panel is changed the output instantly does not change. It takes a while before the actual output changes. The length of the array command I give is also 88 & 133. When I realize that the output is wrong, I disable the DAQmx write vi by a structure of the case, I would expect an error that the output buffer is empty, but rather the old value is generated whenever the start Daqmx vi task is exectuted without.

  My tax any problem is that the output buffer is not get replaced with the new value, but I'm specifyng the size of buffer, performing a registration every time and start the task, waiting until the task is done and the task stop. Each stop & writing should delete and empty the buffer, but I did not understad what goes wrong.

  Also, I thought that maybe that orders are put in queue up in the output buffer, acual generation is not as fast as the call of the DAQmx write & start, but if that's the case then even if I stop the vi the generation should be until the buffer is empty, but that doent happen VI, break breaks of generation. the number of iterations is equal to the generated models. If anyone can help as to what could be the problem?  find code attached below.

  Hello

  If I understand the problem you are experiencing, then the reason for the typical behavior when you run the VI, it is that you are not clearing the DAQmx task whenever you intend to go for a fresh DIO write. You stop just the DAQmx task that seems however to clear the buffer on board space.

  With this post, I am enclosing a VI of the sample that should work according to your expected behavior. You can even call this VI as a Subvi and can use it to update the DIO port with a digital model of variable length fees. Another fact that I would like to point out, is that, once you have initalised one table, it is not possible to reduce the length of the array. You can only increase by adding new elements. According to your needs given that the digital model that needs to be updated will be of variable length, each time you cll the Subvi, you must create a freash of appropriate length and feed it as input to the Sub - VI. Inside the Subvi, according to the length of this array of entry appropriate buffer space is allocated.

  Do trust this solution help solve you the problem, otherwise do not hesitate to go back.

  Best regards,

  Sagar G yapi | Application engineer | National Instruments - India

• How to use a UUID type number instead of sequence as a default value in the attribute of the view object?

  Hi all.. I want to use a type UUID number in an attribute of the object from view as default value to generate the unique field... so, how can I generate random uuid?

  Well, the UUID looks like as follows:

  Example 1: 067e6162-3b6f-4ae2-a171-2470b63dff00

  Example 2: 54947df8-0e9e-4471-a2f9-9af509fb5889

  You can play withgetMostSignificantBits() and getLeastSignificantBits() , this is the long values and you can combine them in order to generate BigInteger, as described here:

  https://gist.github.com/berezovskyi/2c4d2a07fa2f35e5e04c

  Then just use this value in the constructor number:

  http://docs.Oracle.com/CD/E12839_01/apirefs.1111/e10655/Oracle/JBO/domain/number.html#number%28Java.math.BigInteger%29

• apex_email using values of variables/article in p_body

  How can I run the following code:

  I can't get my select query values to generate inside the body of the email. I'm trying to use events. TYPE_ID or stuff like that in my p_body_html apex_mail

  < tt >

  BEGIN

  FOR events IN (SELECT EBA_CA_EVENTS. EVENT_NAME, EBA_CA_EVENTS. EVENT_ID, EBA_CA_EVENTS. TYPE_ID, EBA_CA_EVENTS. ROW_KEY, EBA_CA_EVENTS. EVENT_DUE_DATE, EBA_CA_EVENTS. EVENT_NOT1, EBA_CA_EVENTS. EVENT_NOT2, EBA_CA_EVENTS. EVENT_NOT3, EBA_CA_EVENTS EBA_CA_EVENTS.COMPLETED_MAIL_SENT)

  LOOP

  If the events. TYPE_ID <>(32230291965131516245569156552736940921) AND (to_date (to_char (events. ((EVENT_DUE_DATE, "DD-MON-YYYY HH24:MI:SS"), "HH24:MI:SS MON-DD-YYYY")) = (to_date (SYSDATE) + events. EVENT_NOT1)

  THEN

  APEX_MAIL. SEND)

  p_to = > ' [email protected] ',

  p_from = > ' [email protected] ',

  p_body = > ' ',

  p_subj = > ' Date of scheduled critical event is close! Alert 1',

  p_body_html = > events. Event_name ' < b > < /b > RESSA team critical event notification! < br > < br > the events. Critical event event_name is not yet complete! < br > < br >

  Please fill out all the required measures and then mark the event as State finished in order to avoid escalation, thank you.

  < br > < br > a brief review of the event details: < br > < br > < table > < tr > events. EVENT_DESC < /tr >

  (< /table > ');

  < /tt >

  Richie,

  You must use the concatenation operator (|), for example:

  p_body_html => 'RESSA Team Critical Event Notification!
  
  The ' || events.EVENT_NAME || 'critical event has not been completed yet!
  
  Please complete all actions required and then mark event status as completed to prevent further escalation, thank you.
  
  A brief reminder of the event details:
  
  ' || events.EVENT_DESC || '');
  

  Thank you

  Erick

• Modal region of the tree as a popup... After clicking the value in the tree... How to avoid the parent page is refreshing

  Hi, I spent long hours to solve this problem and wait for the answer from the expert.

  I created a form with text boxes and one of them, I created just small image button to call the modal region of the tree.

  Everything is OK, tree appear and disappear after the passage of the code value for the text element in the parent form.

  But it refreshed and initialized all other areas of empty text as well... ^ ^;

  I think that, because of the link in SQL tree. Someone help me?

  Select case when connect_by_isleaf = 1 then 0

  When level = 1 then 1

  else                           -1

  end the status,

  level,

  "CAT_NM" as the title,

  NULL as an icon,

  "CAT_CD" as a value.

  NULL as ToolTip,

  ? p = & APP_ID.:112 :'|| : APP_SESSION |': P112_CAT_CD :'|| "' CAT_CD ' as link-> How to avoid refreshing the page parent and just switch the CAT_CD to the called page?

  'category '.

  Start with 'PARENT_CAT_CD' is null

  connect prior "CAT_CD" = "PARENT_CAT_CD."

  siblings arrested by "CAT_CD".

  Hey "zoomok,"

  Large - an example would have been my next request in any case I took a glance and changed your demo page to work as you want.

  Things of note:

  -SQL source tree: NO link value! A link value will generate apex code that will redirect you to the link. It will always be a redirect page, where a rerender page, and not what you want! Leaving NULL allows us to interact with the tree interactively via javascript

  -Code in variables and functions global page - javascript - next:

  function treeOnload(){
    var l$Tree = $("#tree_modal div.tree"); // get the tree instance
    // handle the onselect event of the tree
    $.tree.reference(l$Tree).settings.callback.onselect = function(NODE, TREE_OBJ){
      $s( "P112_CAT_CD", $(NODE).attr('id') ); // get the VALUE of the node and put it in item P112_CAT_CD
      closeModal(); // close the active modal region
    };
  };
  

  -In javascript - dependent section I added a call to this procedure:

  treeOnload(); // initialize the tree with our settings
  

  And that's all! I didn't know that you use "openModal". There are different ways to implement modal regions, so it is important to know how we do for ourselves what to do with it.

  FYI - you now need to change your credentials. And mark the answer that has helped you or is correct, please.