A problem whith entering the system.
Open a session, enter the administrator password. After 3 times enter password are control button 'disable system' 55361668
Thank you
Hello
Try to enter: 40049268
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Satellite C660 - continues to enter the system repair
Can someone help me?
I have a Toshiba Satellite C660. Yesterday, it crashed. When it restarted, it went in the repair of the system and whenever I rebooted, it entered the system repair. Don't know if it is relivant but I get a windown come with drvload.exe back.
So I did a factory restore hdd thinking this would clearly be the problem, but it didn't. Now I always get a repair system each time I do updates of mircosoft when I restart, more I can't hardly open programs like firefox, add and remove programs.
I now use a check of HDD to see if I have bad sectors, have also scan mcfee which showed no virus.
Any suggestions would be grateful because do not know what to try next.
Thank you very much
Hello
> So I did a factory restore hdd thinking this would clearly be the problem, but it didn't.
That would mean he s no malfunction of the software and the problem seems to be hardware related. HARD drive recovery can restore the original settings of the software box and they are pre-tested by Toshiba. So, theoretically, he could be sector failed HARD drive, RAM failure or something else> Now, I always get a repair system each time I do updates of mircosoft
This would mean that the problem appears only after Windows update or I understand something wrong? -
I tried to use iTunes to restore my iPhone 5s, but the 17 error happens: "this device is not eligible for the requested build". No problem to enter the recovery mode, connection to the apple Server (the software update download was complete) and internet connection. Help? I do an Apple store to restore?
Error 17 refers to network problems. Take a look at these articles and try the suggestions:
Solve the iOS update and restore error in iTunes - Apple Support
-
Don't let me do anything, as soon as I turn on my pc, it goes to the black screen telling me to enter the system password
It looks like your BIOS password "may" be set.
What brand of computer do you have?
If you have an antistatic grounding cable and are comfortable opening your case, you "can" be able to follow a procedure in the manual of your motherboard to reset such password. If you choose to do so, please be careful because you do so at your own risk.
WARNING:
This response comes with absolutely no warranty express or implied. The author of this response in any way be held responsible for any financial or physical or emotional loss that readers might incur as a result of the advice of this response.
-
Having problems to enter the contacts on Windows Mail.
I did nothing to my computer except have a laptop wireless set up by BestBuy. Is it possible that they did something to Windows Mail. I had no problems to enter the contacts prior to their visit.
You don't say which is exactly the problem.
http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbar
The above information will help you solve the problem.
http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html
Another tutorial on this subject.
See you soon.
Mick Murphy - Microsoft partner
-
problems related to the system
Anyone know how to fix this? Please help me guy I can't yet begin my windows Defender...
You didn't say why you run this utility for troubleshooting. More details on what is or is not
is happening can be useful.
The error code - 0 x 80070490 - is usually due to a problem with a Windows Update.
-If you have a restore point from the system for a while before the error started then in restaurant
time may solve the problem.
[EDIT: @ Shiva - did you read what I posted almost a year before you re-post the link below?]
-System File Checker can also find a corrupted file that he can fix.
SFC/scannow command - file system Checker - Windows 7 Forums
-If no try the above help "System Update Readiness tool-
http://support.Microsoft.com/kb/947821
.
-
printing problems so that the system has user password.
I faced a problem in my local network print, my printer is connected with system with windows 7 and there are 7 total in LAN system, only 2 PCs have windows 7 others have XP but the problem is that system B prints the document when I gave impression system coz one test (window 7) a password , another Xp system command in the print job, but when I delete the password of user accounts on the system A, B system (window 7) gives printing correctly, if you have any solution so tell me?
Hello
Password sharing is enabled by default for computers of working groups. When password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer. There are two ways to enable file or printer sharing.
I suggest to follow the steps provided and check if it helps.
a. Open advanced by clicking the Start button, then on sharing settings Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.
b. expand the home or work network profile.
c. under the password protected sharing, click turn off password protected sharing, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more information:
Share files with someone: http://windows.microsoft.com/en-US/windows7/Share-files-with-someone
Share a printer: http://windows.microsoft.com/en-US/windows7/Share-a-printer
Hope this information is useful.
-
problem with restoring the system etc.
I modified unintentially my devices and an error message came say lack of plug-ins when I went on a site to use video cam I tried to do a system restore to undo this problem but after running this program, it is saying cannot restore files and when he started, he said that he could not find the local disk drive c can you help me please
Hello diannemaloney,
Your computer starts in Windows when you turn it on or are you first the message above? I suggest trying to boot mode safe mode and see if you duplicate this. What version of Windows are you using? Please let us know status.
Safe mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1
Thank you
James
-
INS-35210 problem eaven if the system is x 64
Hello
I try to install DSO with an oracle server database 11g R2 2 standalone version on my windows 7 x 64.
during the installation of the database when I get to choose the database storage (file system or ASM) ASM ichoose and then I get this error message saying that i shoud use a x 64 system (knowing that I am on a x 64 win 7 ultimate)
I have the database and grid both on the site official oracle.
I tried with windows server 2008 and on a XP pro x 64 and I get the same problem
could someone help me please!
Hello
What version of 11G you trying to install? probably, this can be useful:
http://docs.Oracle.com/CD/E11882_01/install.112/e48194/whatsnew.htm#CEGIAJBD
HTH,
Pradeep
-
Problem of overloading the system after the update
Hi all
I've recently updated the 10.2.2 logic version X. Since then, some of my fall of (heavier) projects during playback with the overhead message system. The thing is, these are exactly the same which perfectly reproduces before the update of the files, I haven't added any new titles or effects to the songs since then. I tried the more buffer size without any success. She especially and always happen if I make a side scrolling on my mouse that I tend to do a lot during playback. Yet once, it is not arrived before the update.
Any help appreciated, thanks
Try to change this setting:
Logic - Preferences - Audio and change Multithreading in reading tracks (is not defined to the default).
-
Display driver problems - blockages of the system
My display driver maintains casuing "does not work properly" my system down. It is increadably annoying and I can't aford a new PC.
I tried to install the new driver from the downloads section, but it does not solve anything.
What can I try?
Hello
What did you mean with system breaks down?
The blue screen of death appears on the screen or what?Have you used the good graphic diver from Toshiba? I put t know what unit you have, but some series use different drivers. Don't forget that the driver is good!
But if you you're 100% sure that the driver is correctly and properly installed so it is possible that there could be something wrong with the graphics card on board
-
Problems related to the system of the taskbar
In the tab 'Notification area' of my "Toolbar and Start Menu Properties" window, the boxes icons system 'Volume', 'Network' and 'Power' are unchecked and bot the check box and the name often the box appear dimmed. The "Clock" box is checked and is not grayed out. When I try to click on one of the shaded boxes, nothing happens.
Hello
as they are grayed out try Method 3
There are different ways to fix it
read all the information on the link below
Try Method 3
Method 1. :
1. right click on the taskbar and click Properties.
2 click on the Area of Notification tab (see screenshot left step 3 below)
3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area
Method of reading 3 etc. in the link below
How to enable or disable the Notification area system icons in Vista
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
-
I recently had my computer HP reloaded due to hardware failure by Fry technicians. They have reloaded it back to Home Premium, due to the fact that the initial charge. I had already updated using a copy legal DVD Ultimate. Now when I try to update it gives me the message above. ALSO, when I check the GUI HP, it says my warranty expired 5/02 - OMG, I bought the computer 2/2007. At they recharge an OLD picture or something? HOW to solve this upgrade to Ultimate. I don't want to throw away $150.
You've never given the full error message.
So, we have to guess that it is she:
On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.
Click Start > right click on computer > properties > system > it will tell you which SP you have install.
http://support.Microsoft.com/kb/948537
"How to uninstall Windows Vista service packs"
If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.
And run the upgrade of a Vista operating system.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And your warranty with HP, Microsoft no issues.
See you soon.
Mick Murphy - Microsoft partner
-
Problem after restarting the system
Hello
a few days after that restart the computer began to appearan error, I tried to find a solution somewhere but has failed
p.s
is connected with the domain name.
This is the screen with the show window,
Please help me!
Your network administrator can help you solve this problem.
-
The system could not find the environment that has been entered - option Windows 7
I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.
I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.
I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.
This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.
%ALLUSERSPROFILE%
APPDATA
ASL.log
CLASSPATH
COMPUTERNAME
ComSpec
FP_NO_HOST_CHECK
HOMEDRIVE
HOMEPATH
LOCALAPPDATA
LOGONSERVER
NUMBER_OF_PROCESSORS
OPERATING SYSTEM
Path
PATHEXT
PROCESSOR_ARCHITECTURE
PROCESSOR_IDENTIFIER
PROCESSOR_LEVEL
PROCESSOR_REVISION
ProgramData
GUEST
PSModulePath
PUBLIC
QTJAVA
NOMSESSION
SystemDrive
SystemRoot
TEMP
TMP
USERDOMAIN
USERNAME
USERPROFILE
WINDIR
Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
Thank you very much.
Nicholas CYou can probably fix your problem by using the system restore. Here's how it works:
1. keep tapping F8 during the first phase of startup.
2. select Repair from the menu.
3. Enter the administrator password when you are prompted. It is often empty.
4. When you are prompted, select System Restore.
5. set Windows to a point before this problem occurred.
Maybe you are looking for
-
unconscious local copies of the songs iTunes
I have over 12,000 songs in my iTunes library, which also houses the library music to iCloud and synchronized between my devices. On a Mac, the entire library is already downloaded and resides in the folder that is selected in the media folder in iTu
-
I want to find a bookmark to its location in the hierarchy of bookmarks, but all I can do with the filter is isolate a bookmark [s]; or by using the filter bar bookmarks, or in the ShowAllBookmarks window. For example, I know I have bookmarked some,
-
Tecra A9 does support DVI-port replicator Express
Hello does the Tecra A9 (PTS52E-01T02NGR) support the DVI-port of the express duplicator? The manual (for Tecra A9, Tecra S5, Satellite Pro S200) says this, but the screen is black, if I connect the monitor via DVI port. It works using VGA, but poor
-
Re: Satellite L300-251 - how to exchange the keyboard?
Hello I need to change the keyboard of my Toshiba Satellite L300-251 but can't find the exact reference on the Toshiba site. This computer model seems to be not longer supported by the manufacturer? Nobody knows this information and the best way to f
-
HP mini 110-1144nr current password series [SN edited]
HP mini 110-1144NR give me the current password. Serial number [redacted] Caddy