variable CGI to get the ip address, machine client and browser

Similar Questions

• "Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address

  Hi all

  I'm trying to p2v linux 6.4. It fails with the following message is displayed:

  Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.

  I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.

  In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:

  
  

  eth0 is not a recognized interface.

  Can someone tell me what is happening?

  Hello

  I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.

  HTH

  Plamen

• How to get the Mac address of a virtual machine?

  Hello world...

  I need help to get the MAC address of a virtual computer, I'm stuck in it.

  Please reply if anyone know solutions.

  Thank you

  Mahesh Thawari

  Here's a vSphere SDK for Perl script that extracts the MAC addresses for all your virtual machines - http://communities.vmware.com/docs/DOC-10490

  You should be able to take it and translate it into any language vSphere SDK you plan to use. Basically you'll be listing through virtual hardware for the virtual machine to search for devices of type VirtualEthernetCard and then retrieve the MAC address of each device.

• get the IP address, subnet mask?

  HI people,

  Could someone tell me how to determine if a users IP is with a certain range of IP?

  I need determine if a user has a 111.222.333.444 ip address and a subnet mask of 444.555.666.777.

  I can find ho to get the ip address of the cgi variables, but don't know how works the subnet mask.

  Can someone please explain?

  Thanks in advance

  Hi Matthisco,

  Your colleague IT is right. It is a legitimate question. He has indeed a formula to find the IP address range that corresponds to a given subnet.

  However, your question is more appropriate for a forum on the networks for a Coldfusion forum, because the calculations are very involved. First of all, you need to know if the network is class A (IPs of the form 10.x.x.x), class B (form 172.x.x.x IPs) or class C (192.x.x.x). Other parameters you must factor in the equation is the number of subnets and the number of bits of the subnet and the number of bits of the mask.

  To learn more, Search the Web for the subnet mask. In fact, there are online subnet calculators that generate ranges of IP addresses. You can then use this range in your code.

• Getting the IP address of an engine out of VM

  Is it possible to get the IP address of a virtual computer, while it is turned off?

  Concerning

  Marius

  If your virtual machine is located on the domain controller and if you know the COMPLETE domain name and then look in DNS or DHCP on your domain controller.  But if the virtual machine is powered off possible isn´t of vmware.

• Why I can't get the IP address set correctly?

  Hi, I have a problem while using the vCAC 6.0.1 network profile.  I followed the guide and deployed the iaas application can create the virtual machine by using linked Clone and Clone.  But when I use the network profile to get the IP address of the range that I have already mentioned, the VM simply isn't the right IP address, while I can see the IP address of the vcac portal...

  I put my 192.168.1.100.110 IP range, include this profile in reserve and created a property profile that defines the custom property "VirtualMachine.Network0.ProfileName is my_network_profile_name".  Can I use it to create my plan.  After I have ask a virtual machine does not error, and I can see the right IP address since the details of the article, while it is not configured on the virtual machine.

  Does anyone have this problem before?

  Thank you.

  What is the OS of the VM?

  I found that using Linux I had to configure a vsphere comments customization that has forced the DHCP on the VM at deployment time so that vCAC is able to inject then the IP address.

  Danny

• On ethernet ESXi iface will not get the IP address of the cable modem

  I installed the Vyatta Core 6.3 virtual appliance in VMWare ESXi 4.1 U1 on a Dell Precision 490. I want Vyatta to serve as a single window for my home network together with a red interface with a public IP address, other VMS behind the DMZ and my private machines (laptops, TiVo, etc.) behind the Green interface.

  Here is my VMWare network topology:
  vSwitch0 ("green vSwitch"): NIC 0, connected to the hub of switching/wireless connection with connection cable
  vSwitch1 ("demilitarized vSwitch"): no physical NETWORK adapter
  vSwitch2 ("red vSwitch"): NIC 1, connected to the modem cable Comcast with connecting cable
  Here is my config of Vyatta VM network:
  eth0: connected to vSwitch2 ('Switch red')
  eth1: connected to vSwitch0 ("Green Switch")
  eth2: connected to vSwitch1 ("Switch demilitarized")
  Here is my config Vyatta:
  Ethernet eth0 {}
  dhcp address
  Description "red Interface.
  automatic duplex
  HW - id 00:50:56:3F:FF:01
  smp_affinity auto
  automatic speed
  }
  Ethernet eth1 {}
  address 172.16.122.1/24
  Description 'green Interface.
  automatic duplex
  HW - id 00:50:56:3F:FF:02
  smp_affinity auto
  automatic speed
  }
  Ethernet eth2 {}
  address 192.168.122.254/24
  Description "DMZ Interface.
  automatic duplex
  HW - id 00:50:56:3F:FF:03
  smp_affinity auto
  automatic speed
  }
  My Green interface is very well. All computers connected to NIC of the model Dell Precision 0 get the IP addresses assigned to them via DHCP, which I put in place for this subnet/interface.
  My DMZ interface is very well. I can assign static IP addresses to the other virtual machines, assign their interfaces to vSwitch1 ("demilitarized vSwitch"), and they can communicate with each other.
  By my firewall or zone rules, the machines on the Green interface can communicate with machines on the DMZ, very well, and DMZ machines can establish connections to the machines of the green zone, which is correct.
  Here's MY PROBLEM: eth0 can't get an IP of Comcast address. I tried to change all sorts of locations on the ethernet card virtual vSwitch, etc., nothing helped. I rolled the cable modem power, nothing helps. When I connect my modem cable back to my old wireless router, the router receives an IP address immediately. When I connect the cable modem to 1 NETWORK card on the Dell printer, Vyatta gets no IP address.
  I'm sure I'm just something wrong, but I don't know what. I have a different configuration of Vyatta identical-except-physics somewhere else, but it doesn't seem to work practically
  . I think that it has to work, otherwise why Vyatta would provide an easy to use ESXi device that's read-to-go?
  I thought that maybe the vSwitch in ESXi were getting in the way and I need to connect the virtual machine directly to the physical NETWORK card, but you can do that in ESXi, so it's obviously not.
  No idea what is the problem?

  Answer is here: http://www.vyatta.org/forum/viewtopic.php?p=133590

• An easy way to get the IP address of a VMware Player running?

  Hey guys, need some help to get the IP address of a VMware Player running in windows & linux. An easy way? I search on google. I saw someone said how to limit the selection of the IP address, but this isn't what I want. I want to get the IP address of a VMware Player running in windows & linux. Thank you.

  Hi Badboy,

  Welcome to the forums.

  VMware Player has no IP address, but the guest inside the VM systems have not one.

  If your virtual machines based on the internal DHCP server of the player, for example if they are bridge now or NAT network, then on Windows, you should find information useful in the %ALLUSERSPROFILE%\Application Data\VMware\vmnetdhcp.leases. There is such a file on Linux.

  Good luck.

  Concerning

  Franck

• How to get the ip address of the data storage device

  Hi all

  I developed a project now and you need to distinguish a virtual machine is saved to the device local ESX or remote network storage device.

  I found the data store object in which the virtual machine resides by vi sdk, but could not find the address of the device that includes this data store.

  How to get the ip address of the coding data storage device, which includes the virtual machine? I need your help.

  Thank you in advance.

  How do you try to make a query. Storage devices provides a logic unit number no, there is no IP address for it.

  You can check the same for the storage on vCenter view

• Get the IP address of the virtual computer? (when no DNS available)

  I have a strange setup where I have a server vCenter runs in a private network that has no DNS available IN-HOUSE.  I am running the scripts that query an IP address range, but takes forever to run.  I can run get - vm and get all virtual machines, but can't do anything with them because there is no DNS and I can't find a way to enter the IP address of the virtual computer.  If I could get the IP addresses I could then run functions against them.  If it makes a difference those VMS have two network cards: Public and private.  Any ideas?

  The Get - VM cmdlet returns the IP addresses to the title of Guest.IPAddress count of the first IP address use as well:

  Get-VM |Where {$_.PowerState -eq "PoweredOn" } |foreach { Write "$($_.Name) has an IPAddress of $($_.Guest.IPAddress[0])" }
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• Getting the ip address of the Linux Vm

  Hi all

  Is there anyway to get the IP address of the virtual machine linux where the tools of the virtual machine is not installed?

  Inorder to get the ip address of a virtual machine through the api, you will need to have installed vmware tools. Maybe you can do ARP search using the mac address of the guest of the newspapers.

• How to get the IP address of the client when TCP connect on the server

  How to get the IP address of the client when TCP connect on the server.

  The only parameter obtained the login is the login ID.

  I assume you are using "Wait of TCP on the listening port" on the server. This returns the remote address and port (like out in option).

• Batch file to get the IP address of a spesific adapter

  I found the following code to get the IP address.

  : GetIP
  : IP for the main map
  setlocal
  for /f "delims =: tokens = 1-2 ' %% in (' ipconfig / all ^ | find" IP address "'" ") set GetIP = % d
  ENDLOCAL & GetIP value = % GetIP: ~ 1%
  Goto: EOF

  but as noted only give to the main Board. I want to be able to specify which adapter

  but I struggle to decode this script.

  Hello

  The question you have posted will be well suited in the MSDN Community. Click on the link below.

  http://social.msdn.Microsoft.com/forums/en/categories/

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Vista: Gets the IP address can ping by FQDN and IP address but impossible to surf Web sites.

  Vista:

  Gets the IP address can ping websites by FQDN and IP address but impossible to surf the internet.
  Default gateway is correct

  Same result using two network adapters.

  Norton internet 2010 (same result enabled / disabled)
  WinsockFix (no joy)

  Hi Bigfeeet,

  A. what browser do you use?

  Are b. from when you facing this problem?

  C. you get any error message?

  Have d. you tried with another browser?

  If you are using internet explorer, I recommend you follow the steps in the article below and post back the result.

  http://support.Microsoft.com/kb/956196

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I get the Ip address of my Blackberry SmartPhone

  Hello

  How can I get the IP address of my Blackberry Smartphone?

  Thank you

  You can enter 'ip' in the search field, for example. I did it for you:

  http://supportforums.BlackBerry.com/T5/Java-development/WiFi-IP-address/m-p/374272#M70943