Similar Questions

• 21 Pro slate - Gets the IP address but no Internet connectivity

  Hi all

  I have a slate of 21 Pro with no internet connectivity at home.  The device gets an IP via DHCP on cable networks or wireless, but when you try to browse or access resources on the internet, it simply expires. I tried also to assigning a manual IP address without success. If I take the tablet in a café local wi - fi, it connects fine, but I can't make it work at home. My ISP is Baja broadband, a 50MB / 5MB cable connection LAN details below:

  * Arris T822G cable modem - no. ISP-condition, ability of routing and firewall, just a regular old modem

  * Cisco/Linksys E3000 router wifi - internal network gets NAT'ed here. not about filtering, fancy

  * Switch 24 port managed gigabit Netgear

  I tried bypassing the internal network and connect the slate 21 Pro directly to the modem Ethernet cable through cable. Same problem - it gets an IP (a public IP address in this case), but does not connect to all websites. HP sent me a replacement unit that shows exactly the same problem. Both units work very well at coffee wi-fi.

  (OS is Android 4.3 Jelly Bean. I could take the unit to the WiFi Café and see if there are updates available OTA if anyone thinks that might help).

  I am an engineer network with HER 25 years of experience. My home network is a mature network without problems. Connected to this network and works perfectly are: 2 iPhones, a Roku box, a smart LG TV, 2 Macs, Windows PCs 4. already had 2 HP Touch tablets, which were also very good. Home visits can connect their phones and tablets to our wi - fi without any problem. It's * just * slate 21 Pro, which is bad.

  I'm puzzled. Any ideas?

  Thank you
  Steve

  UPDATE: it's resolved. I found that I was able to gain access to Web sites by IP address, but no host name. There was something wonky with the DNS server provided by the ISP. Once I substituted another DNS server in the IP configuration, it works.

  Weird!

• can connect by using the ip address, but not by using web address settings?

  Try to connect to the internet using access point mobile Windows 7 Firefox browser.
  I can access a Web site by using the ip address using however nothing www.msn.com or whatever it is.
  In the connection to the internet in Network Options window that I have no idea of what to put in there, I have tried auto that nothing works

  (hit the uppercase text - c)

  There servers DNS Setup correctly?

  • http://KB.mozillazine.org/Error_loading_websites#DNS

• How can I get the Ip address of my Blackberry SmartPhone

  Hello

  How can I get the IP address of my Blackberry Smartphone?

  Thank you

  You can enter 'ip' in the search field, for example. I did it for you:

  http://supportforums.BlackBerry.com/T5/Java-development/WiFi-IP-address/m-p/374272#M70943

• Why I can't get the IP address set correctly?

  Hi, I have a problem while using the vCAC 6.0.1 network profile.  I followed the guide and deployed the iaas application can create the virtual machine by using linked Clone and Clone.  But when I use the network profile to get the IP address of the range that I have already mentioned, the VM simply isn't the right IP address, while I can see the IP address of the vcac portal...

  I put my 192.168.1.100.110 IP range, include this profile in reserve and created a property profile that defines the custom property "VirtualMachine.Network0.ProfileName is my_network_profile_name".  Can I use it to create my plan.  After I have ask a virtual machine does not error, and I can see the right IP address since the details of the article, while it is not configured on the virtual machine.

  Does anyone have this problem before?

  Thank you.

  What is the OS of the VM?

  I found that using Linux I had to configure a vsphere comments customization that has forced the DHCP on the VM at deployment time so that vCAC is able to inject then the IP address.

  Danny

• Cannot get on Internet with computer Vista, getting 169 ip address

  We have a problem with Vista my boyfriend. He said that everything was working fine yesterday, and then we left for lunch. He thought that he turned off the computer, but when we came back he was and would not connect to the internet. We first thought it was a bad cable so went out and got a new but no change. I also tried to use the cable from another computer but still can't connect. We get a 169 ip address and the network shows as Public unidentified network with limited connectivity. We have tried to change for private network but always presented as identified and unable to connect to the internet network. I'm sure that yesterday we have a 192 ip address and the address of a default gateway and succeeded to another computer on the network but still could not get on the internet, but failed to get the IP 192 today. I'm confused, what is happening. Help, please!

  More information - Vista computer also has a wireless adapter that when activated, it works but we have the connection Ethernet also works. I tried to connect with the mode safe mode with networking, but get the same thing. I thought to reset tcp/ip, but given that the wireless adapter is able to connect, does that mean tcp/ip works on the computer and running that a fix would be a waste of time? I don't want to do anything that could screw up the wireless adapter. Ethernet is on board so that it cannot be let go and need to reinstall. Any ideas will be greatly appreciated!

  Thanks for your reply. I tried to remove the network adapter from Device Manager and allowing windows to reinstall but it does not solve the problem. It is a desktop computer. I started to think about how the cable could have been pulled and could have damaged the Ethernet port and was going to ask you what the lights where the cable plugs into the Ethernet port average. It's a green light solid with a yellow flashing light next to him. I decided to shut down the computer and blow the Ethernet port with compressed air. To my surprise, it works now! Although your answer directly does not solve my problem, it helped me not to do things that do not help and he will think the Ethernet port and what could be wrong with it.

  Thank you!

• When I get the account I can't find.

  Hi, my imei of the phone is * recorded on this account * gmail.com. When I get the account I can't find. your password * it's the IMEI registration information #: * Details: 1 page/items account not display. Page 1 of 1 view cannot previous 20 items not showing next 20 items view export IDDM Email address last name province/city/code postal DS represent on behalf of Emad Omar Omar Emad's view * * gmail.com.

  not registered find

  < email and personal information under the direction of the host >

  < re-titled by host >

  Activate the iPhone

  This iPhone is bound to one Apple-ID. Enter the Apple ID and password that were used to put in place this iPhone. (c●●●●●@1●●●●●.com)

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Get the email address of the account of the company

  I followed the instructions in this thread.

  http://supportforums.BlackBerry.com/T5/native-development/retrieve-list-of-email-addresses/m-p/25534...

  However, I can not get the e-mail address of a business account. ActiveSync account, it works fine and I get the email address. But on behalf of the company, I get a supplier "Pin to Pin". And account email_address property contains only the PIN code.

  emailAddress = a.settingsProperty("email_address",Property::Value).toString();
  // emailAddress only contains PIN for enterprise account
  

  I tried this in the personal perimter. But it only works in the scope of work.

• How to get the MAC address of the additional 10G NIC with command-line ILO

  How to get the MAC address of the additional 10G NIC with ILO command line?

  Thank you.

  Hi Bruce,.

  Out of what I can find on this network card is not available for the Mac without an operating system. I recommend get/burning a live CD/DVD of Ubuntu/Linux and run an Ifconfig in there.

  Hope this helps you.

• "Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address

  Hi all

  I'm trying to p2v linux 6.4. It fails with the following message is displayed:

  Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.

  I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.

  In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:

  
  

  eth0 is not a recognized interface.

  Can someone tell me what is happening?

  Hello

  I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.

  HTH

  Plamen

• On ethernet ESXi iface will not get the IP address of the cable modem

  I installed the Vyatta Core 6.3 virtual appliance in VMWare ESXi 4.1 U1 on a Dell Precision 490. I want Vyatta to serve as a single window for my home network together with a red interface with a public IP address, other VMS behind the DMZ and my private machines (laptops, TiVo, etc.) behind the Green interface.

  Here is my VMWare network topology:
  vSwitch0 ("green vSwitch"): NIC 0, connected to the hub of switching/wireless connection with connection cable
  vSwitch1 ("demilitarized vSwitch"): no physical NETWORK adapter
  vSwitch2 ("red vSwitch"): NIC 1, connected to the modem cable Comcast with connecting cable
  Here is my config of Vyatta VM network:
  eth0: connected to vSwitch2 ('Switch red')
  eth1: connected to vSwitch0 ("Green Switch")
  eth2: connected to vSwitch1 ("Switch demilitarized")
  Here is my config Vyatta:
  Ethernet eth0 {}
  dhcp address
  Description "red Interface.
  automatic duplex
  HW - id 00:50:56:3F:FF:01
  smp_affinity auto
  automatic speed
  }
  Ethernet eth1 {}
  address 172.16.122.1/24
  Description 'green Interface.
  automatic duplex
  HW - id 00:50:56:3F:FF:02
  smp_affinity auto
  automatic speed
  }
  Ethernet eth2 {}
  address 192.168.122.254/24
  Description "DMZ Interface.
  automatic duplex
  HW - id 00:50:56:3F:FF:03
  smp_affinity auto
  automatic speed
  }
  My Green interface is very well. All computers connected to NIC of the model Dell Precision 0 get the IP addresses assigned to them via DHCP, which I put in place for this subnet/interface.
  My DMZ interface is very well. I can assign static IP addresses to the other virtual machines, assign their interfaces to vSwitch1 ("demilitarized vSwitch"), and they can communicate with each other.
  By my firewall or zone rules, the machines on the Green interface can communicate with machines on the DMZ, very well, and DMZ machines can establish connections to the machines of the green zone, which is correct.
  Here's MY PROBLEM: eth0 can't get an IP of Comcast address. I tried to change all sorts of locations on the ethernet card virtual vSwitch, etc., nothing helped. I rolled the cable modem power, nothing helps. When I connect my modem cable back to my old wireless router, the router receives an IP address immediately. When I connect the cable modem to 1 NETWORK card on the Dell printer, Vyatta gets no IP address.
  I'm sure I'm just something wrong, but I don't know what. I have a different configuration of Vyatta identical-except-physics somewhere else, but it doesn't seem to work practically
  . I think that it has to work, otherwise why Vyatta would provide an easy to use ESXi device that's read-to-go?
  I thought that maybe the vSwitch in ESXi were getting in the way and I need to connect the virtual machine directly to the physical NETWORK card, but you can do that in ESXi, so it's obviously not.
  No idea what is the problem?

  Answer is here: http://www.vyatta.org/forum/viewtopic.php?p=133590

• Windows 2008 R2 as a guest cannot get the IP address of the server (VMware workstation 7.1.3 on Windows 7) professional

  Hi gurus,

  I installed VMware workstation 7.1.3 on my Windows 7 laptop professional x64bit and I can run my old VM (XP) without any problems in this regard. And I tried to install a new client (Windows 2008 R2 Standard x 64) on this subject, when I put the NETWORK card in the deck, he cannot get the IP address from my DHCP, always show me error "Windows has detected an IP address conflict...". ", I tried the IP static installation for her also, same result.

  I tried to install a new windows Server 2003 as a guest (also defined as a network bridge), it works very well, can get the IP address from my DHCP or can set a static IP address with no problems. Does anyone have a similar experience on this combination? Any solution to this issue?

  Best regards

  BUGBUG

  I recently managed to get bridge network work with a Windows Server 2003 R2 SP2 guest in VMW Workstation 7.1.4.385536 on a host Windows 7 SP1 Ultimate.

  VirtualBox 4.0.4.70112 is installed on the host and disabling the 'VMware Bridge Protocol' in the 'VirtualBox in Ethernet Adapter"on the host was necessary.

  Outpost Firewall Pro 7.1.0.3415.520.1247 is also installed on the host computer and I used some information from the link below to add some necessary firewall rules.

  http://www.agnitum.com/support/KB/article.php?id=1000061

• How to get the ip address of the data storage device

  Hi all

  I developed a project now and you need to distinguish a virtual machine is saved to the device local ESX or remote network storage device.

  I found the data store object in which the virtual machine resides by vi sdk, but could not find the address of the device that includes this data store.

  How to get the ip address of the coding data storage device, which includes the virtual machine? I need your help.

  Thank you in advance.

  How do you try to make a query. Storage devices provides a logic unit number no, there is no IP address for it.

  You can check the same for the storage on vCenter view

• variable CGI to get the ip address, machine client and browser

  I want to use the CGI variable to get the customer information such as IP address, computer name and the name of the browser and version,

  I just get REMOTE_ADDR IP address, but I can't name the computer, using REMOTE_HOST, nor the browser information

  I would like to know do I need any set at the server level to get this informaiton of client using the CGI variable?

  If not, is there any available server variable to get customer information?

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  will show you what you can get.

  The REMOTE_HOST being empty is possible; It happens under certain configurations of DNS that I remember well.

  Adobe say this: "because only the variables available depend on server, browser, and the types of interactions between the two, not all variables are normally available and are represented by empty strings in the output of debugging." in addition, they say that CGI. REMOTE_HOST: "If the server does not have this information, it sets REMOTE_ADDR and does not set REMOTE_HOST."

  What you get in return in the CGI scope depends on a lot of things in the client and the client may even remember some information according to local settings or configuring security etc.