'Variant to data' fails to convert a Variant I32.

I read a whole number of a database that was returned as a Variant.

The value is 25, but if the VI it converts in I32, the returned value is 0.

Why is it? How can I solve this problem?

CITA wrote:

The value is 25, but if the VI it converts in I32, the returned value is 0.

Try to use the Variant instead of the data data database ranging from:

Tags: NI Software

Similar Questions

DateField as itemrender causes Error #1034: Type coercion failed: cannot convert '10/03/2006.

I have itemrende onliner.
< mx:DataGridColumn dataField = "solddate."
headerText = "Date".
itemRenderer = "mx.controls.DateField"
rendererIsEditor = "true".
editorDataField = "selectedDate" / >
XML =
< solddate > 10/03/2006 < / solddate >
This translates
DateField as itemrender causes Error #1034: Type coercion failed: cannot convert ' 10/03/2006' in Date.
Is it possible for me to be
1. change the output xml to the required format
or
2 convert the data within the itemrenderer
```
The answer is here http://blog.flexmonkeypatches.com/2008/04/08/datefield-itemeditor-when-date-is-a-string/comment-page-1/

or you can do it inline like

DataGridColumn headerText="Date"                   editable="true"                    rendererIsEditor="true">                              DateField selectedDate="{new Date(Date.parse(data.@solddate as String))}"/>                                               DataGridColumn>
```

Module"C:\ProgramData\EbutwExegu.dat" failed to load the

"I won"module"C:\ProgramData\EbutwExegu.dat" failed to load "whenever I have to start, the system works normally after dimissing message

I also can't uninstall Security Essentials completely - I was wondering if the two were connected

Hello

Google has no information on this 'EbutwExegu.dat' file, so it can be a left over Malware boot entry that was removed from your security programs.

Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

http://www.Malwarebytes.org/products/malwarebytes_free

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

If the problem persists after scanning, take these startup entries:

"How to use MSCONFIG in Windows Vista"

http://www.netsquirrel.com/Msconfig/msconfig_vista.html

You can also use this free program to do, too:

"Autoruns for Windows V11.32"

http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

__________________________________________________

"How to manually uninstall Microsoft Security Essentials 1.0.1963 if you cannot uninstall it using Add / Remove programs.

http://support.Microsoft.com/kb/2435760/en-us

See you soon.

Export of Adobe will not convert my PDF files. I get "failed to convert.

Export of Adobe will not convert my PDF files. I get "failed to convert. Why is this happening?

Proceed to the creation of PDF files

Export and import of data fails
Hello

Import and export data fails. Sometimes, the application crashes when I try to import data. The error I get when you import data by using a rules file is

Rule reading information SQL for the database [Rev_FLA]
Rule of reading of the purpose of the database rule [Rev_FLA]
Active parallel loading: [1] block to prepare the discussions, block [1] write discussions.
Cannot allocate memory aligned to [pMemByte] in [adDatGetFreeBuffer].
Reduce the memory pages cache [3996] to [1545] the lack of virtual memory.
[0x1004a (0x4e576783.0x92ba8)] transaction abandoned due to the State [1130203].
Data Load Transaction abandoned with error [1130203]
Unexpected error Essbase 1003050

The error in the application log is

[Fri August 26 14:59:29 2011] Local/Plan_UAT/Rev_FLA/HypUser/25336/Info (1013166)
[Import] received command of the user [HypUser] [L_RevFLA.rul]

[Fri August 26 14:59:29 2011] Local/Plan_UAT/Rev_FLA/HypUser/25336/Info (1003040)
Active parallel loading: [1] block to prepare the discussions, block [1] write discussions.

[Fri August 26 14:59:30 2011] Local/Plan_UAT/Rev_FLA/HypUser/22716/Info (1008139)
Cannot allocate memory aligned to [pMemByte] in [adDatGetFreeBuffer].

[Fri August 26 14:59:30 2011] Local/Plan_UAT/Rev_FLA/HypUser/22716/Info (1006064)
Reduce the memory pages cache [3996] to [1545] the lack of virtual memory.

[Fri August 26 14:59:39 2011] Local/Plan_UAT/Rev_FLA/HypUser/22716/Warning (1080014)
[0x1004a (0x4e576783.0x92ba8)] transaction abandoned due to the State [1130203].

[Fri August 26 14:59:41 2011] Local/Plan_UAT/Rev_FLA/HypUser/25336/Error (1003050)
Data Load Transaction abandoned with error [1130203]

[Fri August 26 14:59:41 2011] Local/Plan_UAT/Rev_FLA/HypUser/25336/Info (1003037)
Updated load cells [1.52368e + 007] data

[Fri August 26 14:59:41 2011] Local/Plan_UAT/Rev_FLA/HypUser/25336/Error (1013289)
Command [Import] failed due to memory allocation failure

What am I supposed to do? This happens in all three cubes of the application I. In all three cubes, cache data and Index are set to 0.5 GB and the server RAM is 64 GB.

The size of the file I am trying to import is not more than 0.5 GB.

Kind regards
Brig.
You should check how much memory consumes your request, if it's 32-bit windows, which will be less than 2 GB.
It seems he requires more than 2 GB and cannot attack more, the combination of the caches for all databases in the application could take to the maximum, and when the application requires more memory, you do not find on the operating system.

See you soon

John
http://John-Goodwin.blogspot.com/

Error #1034: Type coercion failed: cannot convert mx.controls::TextArea@7914c29 to myComponents.DocumentTextArea

Hi guys
I dynamically add new linebreaks in my arraycollections. The first text box fits in the table, but in the second text box is inserted into the table I get the error in the title of this thread. Code below:
TypeError: Error #1034: Type coercion failed: cannot convert mx.controls::TextArea@7914c29 to myComponents.DocumentTextArea.
to test2 / getDocObj () [C:\Documents and Settings\Administrator\My Documents\Flex Builder 3\test2\src\test2.mxml:82]
to test2 / checkLength () [C:\Documents and Settings\Administrator\My Documents\Flex Builder 3\test2\src\test2.mxml:42]
private void checkLength(event:KeyboardEvent):void
{
var textArea:TextArea = new TextArea();
textArea = getDocObj (event.currentTarget.id); -Error begins here.
doc. Text = event.currentTarget.id;

If (event.keyCode == 8 & & textArea.length == 0) {}
removeChildTextArea (textArea, event.currentTarget.id);
documentPage.setFocus ();
}
Else if (event.keyCode == 8 & & (documentPage.height - documentPage.mx_internal::getTextField () .height) < = (documentPage.height - documentPage.textHeight)) {}
documentPage.setFocus ();
}
ElseIf (textArea.height - textArea.mx_internal::getTextField () .height > = textArea.height - textArea.textHeight) {}
create new textarea
var newtextArea:DocumentTextArea = new DocumentTextArea();
documentContainer.addChild (newtextArea.getTextArea ());
newtextArea.getTextArea () .setFocus ();
newtextArea.getTextArea () .addEventListener (KeyboardEvent.KEY_UP, checkLength);
documentArray.addItem (textArea);

if(documentArray.Length == 0) {}
newtextArea.getTextArea () = (0) user.user m:System.NET.SocketAddress.ToString ();
}
else {}
documentPointer += 1;
newtextArea.getTextArea (user.user = documentPointer.toString ());
}
}
}
private void getDocObj(id:int):TextArea
{
trace ("size of table '+ documentArray.length +' and the size of the id is"+ (id) m:System.NET.SocketAddress.ToString () ");
var findTextArea:DocumentTextArea = DocumentTextArea (documentArray.getItemAt ((id)));
Return findTextArea.getTextArea ();
}

You try to get a TextArea to this DocumentTextArea, it is the problem, why you do not change this line
```
 var textArea:TextArea = new TextArea();
```
To do this:
```
 var textArea:DocumentTextArea= new DocumentTextArea();
```

Processing of data of a converter A/D (standard equipment)

Hello

After a lot of research and reading - I finally ask the beginner question.

How can I manage collected data (String) HEX to decimals converted in the

example "Advanced Serial write and Read.vi ' to be displayed in a field or stored in

a table?

Here is the configuration:

I have a very fast 10MS/s A/D converter, which is controlled by a virtual COM port.

For the initialization and the trigger, orders are send as strings followed a.

The data is immediately stored on on-board FIFO memory with a sample of 4096

size. The data are transmitted as HEX strings with a maximum of FFF (which is equal to 1 V)

and a minimum of 000 (equivalent to 0 V).

Communication with the converter works very well. The data are taken from the FIFO

with a while loop (4096 times running) and the unique data values seem to agree.

But now I have the problem of the 'mix' of a group of data that can be displayed

or stored for manipulation later...

Please give me a hint!

Sincerely

Christian

Hi Christian,

you don't need the loop for. create the shift register on your loop. See the image as an attachment.

Mike

EXPORTPDF fails to convert

I have an annual pass. I tried to convert a PDF 15 MB to Excel. As well the Android + Adobe Reader Windows + 10 Chrome. In both cases, I get the message "Conversion failed". I tried Adobe Support cat. They are able to help and suggested announces the problem here. Can anyone help? Even a cursory search reveals that the problem is fairly common, perennial for many years and still not solved by Adobe. OCR disabling etc. do not seem to work.

There is nothing forbid us to help: ExportPDF is a solution based on the server, which means only Adobe had access to what happens when your job is being processed. You pay your subscription, so I guess that you are eligible for service from Adobe. Try again and see if you can talk/chat with someone else who is more willing to help.

What I can tell you is that the result of a conversion of PDF to any other format is highly dependent on the quality is your PDF. If important information is missing from the input file, you will never get an output file good. When you have Adobe Acrobat, you can try to convert the file into images, and then re-import these images in a PDF, OCR file this file and then convert for example Excel. This sometimes give you best results.

the host key fingerprint verification failed when converting to a linux machine

I use the 6.0.0 converter to convert a machine physics linux vm. I get the following error repeatedly. He is always stopped at 3% after 3 minutes
MSG = "a general error has occurred: # XYZ.mit.edu SSH - 1, 99 - OpenSSH_4.3.
-> # SSH-1 XYZ.mit.edu, 99 - OpenSSH_4.3
-> # SSH-1 XYZ.mit.edu, 99 - OpenSSH_4.3
-> The authenticity of the host that XYZ.mit.edu cannot be established. Welcome to the fingerprint of the key xx:xx:xx:xx:c7:5f:23:34:d7:2 c: 79:7e:77:92:3e:e6 verification failed.
'--> (return code 1).
I have spent many hours on this but could not understand it. I tried a Linux physical different and got the same error. I have no problem connecting to the physical machine XYZ.mit.edu outside the converter. The converter contains plink program under C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone, I can run plink for the physical server XYZ.mit.edu to store the fingerprint in the cache and it connects fine.
I have no idea whence the SSH-1, 99 - OpenSSH_4.3 in the error message. The physical server XYZ.mit.edu will OpenSSH_5.3p1. Here is the/etc/ssh/sshd_config on the physical server entry

# cat sshd_config | grep - v #.
Protocol 2
SyslogFacility AUTHPRIV
PasswordAuthentication yes
ChallengeResponseAuthentication no
GSSAPIAuthentication Yes
GSSAPICleanupCredentials Yes
UsePAM Yes
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
X11Forwarding yes
MaxStartups 10
Subsystem sftp/usr/libexec/openssh/sftp-server
Anyone know how to bypass this error?
Thank you very much!

Hello

It is possible that the help of the virtual machine cannot solve XYZ.mit.edu. You can try a ping of VM, another in the same VM to check network.

If this is the case, use the IP address of the source computer.

HTH

Plamen

Error - permission to perform this operation was denied - Log: failed agent: converter.fault.IncorrectCredentialsFault

What is strange to me, is that I know that I am using the correct credentials and my account is the local administrator for the target computer group.
Note these two, seemingly contradictory, journal entries:
2014 02-19 T 08: 05:08.856 - 08:00 [info 06688 "Default"] [user, 874] user authenticated successfully ZOOMSYSTEMS\Peter.Bollwerk - priv of: 1
2014 02-19 T 08: 09:14.117 - 08:00 [error 02568 'Default'] [agentManager, 95] [AgentManager] install Agent failed: converter.fault.IncorrectCredentialsFault
This section can be found in the journal mistletoe:
2014 02-19 T 08: 11:55.909 - 08:00 [error 02612 'wizardController"] must be physical computer to access administrator
What I'm missing here?
I checked that I have the administrator rights on the source and target computers.
I'm using the correct credentials.
I use the Standalone converter 5.5.

OK, so you must use local Administrator named "Administrator". Generally, the problem is that the administrator is not the real administrator until confirm you the action (when UAC is enabled). Converter uses many features that requires administrative privileges.

VMware Converter 4.3.0 - build292238 fails to convert the WSvr2K3 - failed with MethodFault::Exception: converter.fault.CloneFaul

I managed to convert this WSvr2K3 with an earlier version of VMware Converter (version unknown - disappeared today and didn't is more free to download). Now with VMware Converter 4.3, I made 6 attempts, and they fail to 19%. ESXi 4.0 host and the original client OS is WinXP.
Here's what I see in the papers...
VMware-converter-worker - 11.log:
[#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] NfcNet_Send: 272 requested, only 9 bytes sent
[#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] NfcFileSendMessage: hdr send failed:
[#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] Network error - could not send header message
[#10] [2011-06-14 08:34:28.893 02780 error "task-10'"] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError 3
[#10] [2011-06-14 08:34:28.893 02780 error "task-10' '] before sesison farm...
[#10] [2011-06-14 08:34:38.675 02780 error "task-10' '] hosted the managed disk clone failed: Sysimgbase_Nfc_PutFile failed
[#10] [2011-06-14 08:34:38.675 02780 error "task-10'"] Clone disk failed with error clone Sysimgbase_Nfc_PutFile failed
[#10] [2011-06-14 08:34:38.675 02780 error "task-10'"] TaskImpl failed with MethodFault::Exception: converter.fault.CloneFault
[#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] SingleDiskCloneTask [ward-Windows Server 2003 edition Enterprise x 64] host\Shared - \\vmware - Folders\VMwareSharedFolder\vmware_convert\ward-Windows Server 2003 Enterprise Edition x 64 Edition\WindowsServer2003EnterpriseX64Edition - cl1.vmdk--> [ward-Windows Server 2003 Enterprise edition x 64]-[datastore1] ward-Windows Server 2003 Enterpr / ward - Windows Server 2003 Enterpr.vmdk updates, States: 4, percentage: 19, xfer rate (bps): 3043327
[#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] DiskBasedCloneTask ward-Windows Server 2003 Enterprise edition x 64-> ward-Windows Server 2003 Enterprise edition x 64 updates, States: percentage, 4:19, xfer rate (bps): 3043327
[#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] CloneTask updates, States: percentage, 4:19, xfer rate (bps): 3043327
[#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] CloneTask failed
[#10] [2011-06-14 08:34:38.675 02780 error "App"] Task failed:
[#10] [2011-06-14 08:34:39.893 02780 info "task-10'"] Programmed timer cancelled, succeeds StopKeepAlive
[#10] [2011-06-14 08:34:39.987 02780 info ' vmomi.soapStub [49]'] Reset Adapter stub server TCP:192.168.0.21:443: closed
[#10] [2011-06-14 08:34:39.987 02780 info "App"] Completed task: the task-10
[#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] CloneTask updates, State worker: percentage, 4:19, xfer rate (bps): 3042304
[#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] TargetVmManagerImpl::DeleteVM
[#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] Reuse the existing connection of VIM to 192.168.0.21
[#10] [2011-06-14 08:34:40.112 01788 info "task-9'"] Destruction of vim. VirtualMachine:480 on 192.168.0.21
[#10] [2011-06-14 08:35:13.331 01788 error "App"] Task failed:
[#10] [2011-06-14 08:35:13.331 01788 info "task-9'"] Programmed timer cancelled, succeeds StopKeepAlive
[#10] [2011-06-14 08:35:14.940 01788 info ' vmomi.soapStub [48]'] Reset Adapter stub server TCP:192.168.0.21:443: closed
[#10] [2011-06-14 08:35:14.940 01788 info "App"] Task completed: action-9
[#10] [2011-06-14 08:35:14.987 02340 info "App"] [Converter.Worker.DiagnosticManagerImpl] [Task-9] Production job log bundle.
VMware-server-converter - 11.log:
[2011-06-14 08:35:14.956 01512 error "App"] [task, 344] [LRO] Unexpected exception: converter.fault.CloneFault
[2011-06-14 08:35:14.956 01512 info "App"] [task, 373] [task-6] - ERROR - convert: converter.fault.CloneFault
{(converter.fault.CloneFault)
dynamicType = < unset >
faultCause = (vmodl. NULL in MethodFault),
Description = "Sysimgbase_Nfc_PutFile failed", he said.
MSG = ""
}
[2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 260] TaskInfo recovered to "converter.task.Task:task - 6" mapping to "converter.task.Task:task - 6".»»»
[2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 300] The task with id = 'task-6' turned out to be a task 'recent '.
[2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 314] No group of existing log not found for task with id = "task-6. The task is still 'young' so a bundle of newspapers going now is assigned.
[2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 756] Recovery of the related tasks of diagnosis for the tasks of server with id = "task-6. ^
[2011-06-14 08:35:15.237 02212 info "App"] Suspended 1 elements of Planner for employment (job-39) - Sub __thiscallConverter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,classConverter::VdbConnection_&) ("d:/build/ob/bora-292238/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:823")
Of course I would appreciate some suggestions. Is the MethodFault::Exception: converter.fault.CloneFault the problem? And if so what does that mean?

Do not use shared folders to access the virtual machine.

Use a drive letter - or
just start the virtual machine and use the remote clone function

File continually fails when converting to Word

Needless to say that I am not at all satisfied with this product! I lost in the course of the hour (and $20) trying to convert a simple 2 page PDF file to Word and it fails continually! Does anyone know how to contact Adobe customer service so I can get back my $20?

Hi WoodhavenCC

You can contact the Support from the link below: http://helpx.adobe.com/contact.html

Support chat and phone support is avaialbel to help you...

Direct link: http://helpx.adobe.com/contact.html?product=acrobat-com&topic=using-my-product-or-service

Click on I still need assistance to access the support phone and Chat Support

Convert the task failed on Converter 4.0

I tried to convert Windows Server 2003 SP1 machine VM VMWare infrastructure Standard, but it failed with the message:
FAILED: converter.agent.internal.fault.PlatformError.summary
There was no problem when configuring the task. Log file is attached.
I have to convert the machine as soon as possible, because I'll have to return computers back soon. Any help would be appreciated.

Hello

Your newspapers, I think you are trying to do the distance p2v. The problem is that there is no connection of your computer remote (laptop) of gi1esx1.gosinform.ru (your ESX). It is a quite common problem where your ESX is connected to the computer that you have installed the converter on, but not to the remote machine.

You will need to make sure that gi1esx1.gosinform.ru:902 is available from your laptop.

NULL dates - how to convert to another string
What is the best way to convert a DATE to a string data type empty value "empty date".

So I'm doing at the moment:
```
with t
as
(
select current_date d from dual
union 
select null from dual)
select t.d, nvl(to_char(t.d),'empty date') a/*, nvl(t.d,'empty date') b*/ from t;


--
03.03.2010     03.03.2010
(null)                     empty date
```
If I tried to display column b he commented, but I got error:
"ORA-01858: a non-digit character was found here where was waiting for a digital".

So, is the best way to display dates no other string as 'empty date' as I do in the column "a"?
Or is there a better way?
Hello

CharlesRoos wrote:
Why it is good to determine the date format?

If you do not, you will get a default format, which may not be what you want.

I want to display the date as it is in the database,

I bet that you don't have!
DUMP (t) is as close as you can get to the display of the date that it is in the database. It's a format that the computer is convenient, but most people don't.

and, if it is empty, so I want to display a string like 'date of emptiness '.
Why I need the date format?

You don't need, and if you really want to display the date in the default format, whatever it may be, then you won't. It's a legitimate, although very rare request.

Maybe I should use case-expression in sql?

It is an option.
```
NVL ( x
    , y
    )
```
produces the same results as
```
CASE
    WHEN x IS NULL  THEN  y
                        ELSE  x
END
```
Most people find easier to read and write NVL.
COALESCE and DECODE, even NVL2 can also produce the desired results.
NVL, CASE, COALESCE, DECODE and NVL2 have in common: all the possible return of values should have the same data type. If they are not, an implicit conversion is attempted, and it's bad.

Data grid component converter
Hello

I have a data grid and I would create a point converter that color cells based on the contents of the cell. For example, all the cells that contain the letter 'E' will be green, the letter 'L' will be red, the letter "C" will be yellow, etc.

I dynamically create the grid in my script file:

I LOOP

new column = new DataGridColumn();
newColumn.dataField = addDaysToDate (i, _firstDay);
newColumn.headerText (_firstDay.date + i) = m:System.NET.SocketAddress.ToString () + "/" + (_firstDay.month + 1) m:System.NET.SocketAddress.ToString ();
newColumn.itemRenderer = new ClassFactory (itemRenderers.component.gridItemRenderer);

Add series to series column: columnSeries
columnSeries = grid.columns;
columnSeries.push (newColumn);
Grid.Columns = columnSeries;

END OF LOOP

My dataProvider is an object that contains (umong other attributes) an array of key/value pairs: [date] [letter]

In my gridItemRenderer I want to enter what data must be defined in the cell and change the background color of the cell as a result.

Is this possible?

Many thanks in advance,

Janie
Also remember that backgroundColor is a style, so in your renderer, you can use setStyle()

I think that there is a cell coloring example renderer on www.cflex.net
Tracy

'Variant to data' fails to convert a Variant I32.

Similar Questions

Maybe you are looking for