Various issues with M40X

Similar Questions

• Various issues with Satellite M40 225

  Hello

  I am having some problems with my laptop Satellite M40-225. -Here's...

  First of all when booting I get a bad / lack error OSB, in order for me to get to the start I must incline Press esc, go into the bios then get out of the bios tilt the laptop again and it will start then.

  Also I sometimes get errors BOSD, sometimes he mentions ati2, but above all it says physical memory.

  I have flashed the bios to try to get rid of the first error but no luck.
  Nothing new has been installed on the laptop, I even reloaded windows and tried with a spare hard drive, but nothing seems to work!

  Please help, I know that probably need something alternative, but I don't want to start buying things for her I have I don't know what's going to fix it.

  Thank you

  Susie

  Hello

  AFAIK usually Missing/Bad OSB logo error message is displayed if the error was detected in the BIOS or CMOS ROM module

  But according to the BSOD with physical memory error error, I guess that your modules of memory are not correct and that this must be the main reason for you questions.

  Of course I could be wrong also, and perhaps the whole issue is related to the faulty motherboard but in the first step, you should check your modules of memory installed.

  Hope you will get rid of these questions after a replacement memory.
  I keep fingers crossed ;)

  Good luck

• Should have issue with PE8 airbags!

  PE7 was (at least for me) usable and stable.  He did what I wanted, and I don't remember the problems of stability.  That all ending with an 'upgrade' to PE8.  I can't seem to make it work for 2-5 minutes before it crashes.  It happens at different times and in various activities... just look at the screen.

  I have a good video card NVIDIA (which very well seems to work with all the other products that I have), but I read the 'solution' pinned at the top of this forum, updated to version "beta" of the driver who is supposed to fix the random crash... However, my 195,81 verified drivers have had zero impact on the uniform PE8 crashing.  I was not able to complete a single project, as I've "improved" version 7.  My system is vista 32 bit with 4 GB of physical ram and a stocky core2quad processor.  It runs CAD, flight sims and other audio applications and video two well and probably... but not PE8.  The only other app with what he has had problems is PSE8... but the minor issues with PSE8 pale in comparison with the total absence of ergonomics in PE8.

  I see so many similar reviews and comments from the forum... I wish, oh how I wish I had waited for a decision on the upgrade!

  So the question is: given this release has been horrible, there will be a free and fixed version 8?  .. .or will be Adobe attempt to make his customers wait (and pay) version 9?  I can say that if they think that this is the case, Adobe loses me as a client PSE & PE... and all hope it will be for the review of their substitutes like Lightroom, Photoshop or Premiere (non-elements).  They can be produced purposes... but if the prospect of the company is such with the entry-level products, it won't take long for a company to feel too big for her panties with the highest range as well.

  Has no QA whatever happen with PSE8 or PE8?

  I can also use ffdshow, but I turned off this one due to the poor performance in the Organizer.

  I don't know how if button PrE, but FFDShow asked all sorts of headaches to the PrPro. A few users have been able to do anything when it was installed. To return to the PrPro 1.0 release (first 7), Adobe changed the engine to display live Show. I don't know at what time in pre development even could happen - don't know my history of pre, as I know PrPro.

  For users of PrPro, the complete withdrawal of FFDShow got things back to normal. It seems a little difficult to get rid of, however.

  As to why your PrE earlier will work fine with the same images, but PrE 8 is having issues, I can't help, as I don't know what's under the hood with 8 PrE. Perhaps a new feature that Smurf things with the MS MJPEG CODEC, or maybe the conflict is elsewhere.

  I think that the Mogran, at least, has a trial, but he had the MainConcept MJPEG for so long, I forget now.

  I would look at disabling FFDShow, as a test. Make a System Restore Point before the withdrawal, in the case that has zero to do with anything whatsoever, and you want to roll back to have. Then remove and test. I would also like to do a System Restore Point it too, just in case.

  Good luck

  Hunt

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• Docking station issues with power - power of the outdated USB hub

  We get an outdated 'USB hub power' error on my docking station with an E7440 anchored in it.  Worked fine, since I have received the device, but all of a sudden it-error when I try to access any flash drive.  Swapped out with a new one, number the same dock.  Also swapped power adapter, also with no effect.  Any ideas on the problem or resolution?

  Did you by chance install or upgrade of Citrix Receiver recently?  I did and my USB ports no longer works in the docking station.  This link has Details of why:

  blog.wisefaq.com/.../USB-Power-issues-with-Citrix-Receiver

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• What are the known issues with Bravia HX-925

  Hello

  Please let me know the known issues with the HX - 925 Bravia Full HD 3D TV series.

  Thank you and best regards,

  Arun

  Hi ArunHX925!

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• Are there still known issues with Lightoom 5 and El Capitan with respect to attachment? I know that problems have been resolved with CC Lightoom

  Are there still known issues with Lightoom 5 and El capitan with respect to attachment? I know that problems have been resolved with Lightoom CC.  I looked on the Internet but most of the references are Lightoom CC.  Ive got all the updates with Lightoom 5, (Camera RAW 8.1), but also Apple, (El Capitan 10.11.3), but my Nikon D800 will not always tie.

  HAL P Anderson wrote:

  The problem is in the SDK (SDK) of Nikon. He used features of OS that changed with El Cap. All previous versions of LR were broken by the Exchange operating system. For LR 5 to work, it must be associated with the new SDK of Nikon, and Adobe is not reissue of older versions.

  The result is: LR5 and previous versions will continue to not be able to attach Nikon under El Capitan. I'm sorry.

  HAL

  Although what you say is maybe true, I'm not sure, but there were reports of people that says exactly the opposite. Home of Nikon has not worked in 2015/6 but continued to work in LR 5 on the same Mac running 10.11.x.

• APEX dynamic Action issue with custom button template

  A new day and a new problem. -.-

  I wanted to create a dynamic action, if a button is clicked and got the error "the selected button uses a 'button model' which does not contain the #BUTTON_ID substitution string #. So I googled a bit und found issue with action Dynamics apex. I thought that this would solve my problem and I looked in the model button to find this:

  <table class="t15Button" cellspacing="0" cellpadding="0" border="0"  summary=""><tr>
  <td class="t15L"><img src="#IMAGE_PREFIX#themes/theme_15/button-l.gif" alt="" /></td>
  <td class="t15C"><a href="#LINK#">#LABEL#</a></td>
  <td class="t15R"><img src="#IMAGE_PREFIX#themes/theme_15/button-r.gif" alt="" /></td>
  </tr></table>
  

  A former colleague created the model itself and I do not know where to insert the #BUTTON_ID #. Does anyone have any suggestions?

  Concerning

  Chris

  Miss you atrribute button ID,

  is the correct code

  
  
  #LABEL#
  
  
  

  I hope this works.

  Go

• English CC only version: compatibility issues with Windows 7 in Italian?

  Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

  Francesco

  Resolved:

  I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

  Thank you, bye