VC:virtualmachine and vCAC:VirtualMachine not transmitted from vRA at vRO

Similar Questions

• Satellite L750 freezes constantly and often does not wake from sleep

  Hello

  I have laptop Toshiba Satellite L750 - 1 L 8 with Windows 7 Home Premium x 64,.

  Since I have (about a year and a half), it freezes sometimes that I use and often not waking sleep of form. The symptoms are the same in both situations: nothing does, CTRL + ALT + DELETE does not work and there is no further assistance as the ' down in now the starter for 3 sec button. Until recently, it freezes only occasionally, but now this, so that each half-hour, which makes the computer unusable.

  When I tried the reclamation, the Toshiba service responded that the problem is in the software, so not included in the warranty and that the windows must be reinstalled.

  I did and he recovered to the factory setting, but even if the problem persists even in the authorized computer. It freezes again at least every hour.

  I don't really know that the cause could be now and I hope that someone could know and help.

  Thank you

  > I did and he recovered to the factory setting, but even if the problem persists even in the authorized computer. It freezes again at least every hour.

  Do you mean that the system hangs when using the laptop?
  This is definitely not good.

  Have you noticed a higher internal temperature?
  High temperature might affect systems and could lead to such outputs black system.
  In case you never clean the cooling fans in the past, I recommend you to use a jet of compressed air and remove dust from the air vents.

  With regard to the question of the sleep mode:
  In this case, you should check if the BIOS is updated. In case of BIOS version more recent has been published, you should try a BIOS update

• HP 15-g013dx: ports USB 2.0 and devices does not downgrade from Windows 7

  Hi all

  I'm trying to downgrade a 15-g013dx (J5T33UA) computer laptop HP Windows 8.1 to Windows 7. It is a four-core AMD A8 APU system.

  I have problems with the devices USB 2.0 not supported by the hardware.  I have all devices in Device Manager, but the computer does not detect the USB 2.0 devices.

  He will recognize USB 3.0 devices very well when they are plugged into the USB 3.0, but no USB 2.0 ports. Peripheral USB 2.0 do not work in any port.  I can't confirm the devices USB 1.1 at this time.

  CMOS configuration is set in Legacy mode: disable.

  Is there an additional driver or configuration that I am missing, or is there something else going on?

  Thanks in advance!

  @OtakuN3rd ,

  Hello and thanks for the display on the HP support forums.  If you want to downgrade your system to Windows 7, you'll want to download the drivers and software supported first.

  Here is the link to your drivers and support systems.

  Drivers for laptop PC HP 15-g013dx

  To make sure you material works you want to install your drivers starting with the chipset driver before all others.

  For windows 7, you'll want to check out this link as well.

  UEFI boot or legacy - tips

  If you follow that you should have no problem.

  If your USB 2.0 ports are still have a problem then contact support phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a nice day

• Most of the fonts Typekit and WebFonts (Wf) not selectable from within the Muse?

  Hey! Seems to be a bug with fonts of the Muse?

  When I go to select some fonts (Typekit and Webfonts), they are not yet selectable from within the Muse. Even a font that I just downloaded in the "Add web fonts" menu does not work...

  Here is a screencast to show you what I mean (I'm clicking on each policy as you see me go down the list in order):

  http://screencast.com/t/pGxQEMd7FQd

  What is happening and what is the reference for this?

  Thanks for any help!

  Please see here:

  https://forums.Adobe.com/thread/1691738

  Thank you

  Sanjit

• My Favorites are lost and Firefox can not restore from backup with this error msg "Unable to deal with the backup file.". Someone please help.

  I use Firefox 12 on my Macbook Pro, it crashed and when I rebooted, all my favorites have disappeared. When I tried to restore from the backup files, he returns with "Failed to process the backup file." Someone help please I would have lost years of bookmarks.

  Thank you

  Hi guys,.
  I also experienced this problem and based on the previous explanation in one of the threads here I got the following article - http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  I myself have deleted only the file places.sqlite and places.sqlite.corrupt from the profile directory and was able to import my favorites since the backup file successfully.

• Lightroom does not - I get an error message... is open in another application. It is not and I can not move from there. It allows me to open a different catalog as April 2015, but that has only 2 pictures inside? Any suggestions?

  Can anyone help?

  Jim, I arrived. All correct. Thank you very much. Excellent advice.

• Why the simple task of transferring photos that should be done drag and drop such a hassle from my phone to the computer

  Why the simple task of transferring photos that should be done drag and drop from my phone to computer such a chore... It is a success or a failure... open iphotos sometimes sometimes it doesn't.

  < published by host >

  Drag and drop is not supported from iPhone to computer.

  Sync with iTunes or iCloud > keep your photos safely stored and updated on all your devices - Apple Support

• I want to connect to a Canon MG5320 printer to my new PC which has Windows 8 and I do not know how... The new computer is a HP Pavilion p6 - 2316 s PC Help!

  I don't know how to install a printer on my new PC.  The printer is a Canon MG5320, who is a year and work well with my computer discarded.  Now I have a new HP Pavilion p6 PC - 2316 s and I can not print from it until it is installed. The printer is on and ready, but does not appear on my computer screen as it did on the old computer...  Help!

  [Moved from comments]

  Hi Aggietol,

  1. Visit the website of Canon Pixma MG5320 & driver software
  2. Select the operating system ==> Windows
  3. Select the Version of the OS ==> 'Windows 8' If you have a 32-bit version of Windows 'Windows 8 (x 64)' otherwise
  4. Click on the arrow of drivers
  5. If your printer is connected directly to your PC, select "MG5300 series MP Driver worm." 1.00 has (8/8 windows... «. If it is connected through your local network, select "MG5300 Series Mini Master of installation (Windows 8/8 x 6..."
  6. ...

  Hope this helps at & answers your question.

  See you soon

  LZ.

• You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500

  You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500 contacts that I have that are in other contacts.

  Hi robertsjohn125,
  Contacts are not supported in Firefox, unless you take on Firefox Desktop and Hello of Firefox?

  Where to manage your contacts, this might help to direct you to the correct support.

• Why can't I open an email in zoho? Occurred on 2 different computer, different from firefox 2 different OS &amp; version 2. And it's not zoho.

  I could connect to zmail of zoho and retrieve my mail but I could try to open 20 times, but I have nothing, not even an error message. I went into my settings on zoho and couldn't find anything that would cause it. So I connected my cell and no problem opening. So I tried to find an answer on your site of troubleshooting, but the only thing I found was reset and I tried, but same problem, I see nothing else wrong with it, but I do not always use all the capabilities of firefox.
  The 1st time was on my desktop with Win7 and firefox v.20. I removed it and put v.15 in (Icouldn t find anywhere a v.17) 2nd time was on my laptop with Vista and firefox v.15. (I've installed this version once I changed the desktop computer. I'm a big supporter of mozilla and Firefox. I hate IE - any version. It would kill me to go to this extent, but that's enough to seriously consider finding something else. I'm at halfway to crazy in a good day so its not that far from go if I am driven crazy.
  I also find firefox wont close completely unless I go into the Task Manager and ending the process, on both systems.

  Update your latest version or download of mozilla firefox

  • www.Mozilla.org

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• I opened a photo in an excerpt from my email and it does not close

  I sent pictures to my email, so I could record in the photos from iPhoto app did not work. In the middle of my project. I opened an image in the preview to save and it will not save or close. It shows just running and running. How can I force it to close?

  I am trying to install the update for my software, but this application is not closed so it can install.

  I don't know, but looks like the preview, Photos or mail does not. If you go to the Apple in your menu bar and select force quit, it should identify and allow you to force quit the application is not responding.

• I can not print from Firefox, but can all the other browsers and applications (such as MS Word, notepad, etc.). I get a misprint on the print monitor as if it was a problem of queue.

  This is a recent development, but I can not print anything in Firefox. Printing open normally, it's going to the right printer that works... I can print other browsers and applications. It acts like it is in queue and then a printing error occurs and it will not be printed. I closed and reopened Firefox, open in safe mode, cleaned cache/history/cookies and restarted twice. Nothing makes no difference. Also tried printing from the preview before print that had the same result. I can print all other browsers and applications without problem, so it must be within Firefox.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• Portege M200 - the keyboard does not work and I can't boot from CD/DVD

  Hello

  I recently tried to install VM Player on my Toshiba M200. When I restarted my computer, I found that my network connections did not work. I tried to uninstall the reader of the VM, but it failed to halfway. As the program has created a number of virtual network connections which I couldn't remove, I went into the registry and remove the 20 entries or while I thought when linked.

  I rebooted and found my keyboard HID devices and Wireless does not. So I started using the ketyboard softward to try to resolve the problem. I was able to reboot and login using the software keyboard until I did a restore to the last parameter of normal startup. How, rather than get my login window, I get a message asking me to press Ctrl-Alt-Delete. When I do using the software keyboard I get another window saying due to security, I have to press key instead of Ctrl-Alt-Delete Windows security. When I press the button on the key of Windows security on the lower side right of the screen, nothing happens.

  What I can do. I have also tried to attach a USB CD drive (Philips) but can't get the laptop to boot from it. I get an error message (so I had to research readers of CD boot) saying the laptop can not find the drive. The CD comes on during startup, but only for a second.

  I'm desperate so please let me know what options I have or what I can do about it. The physical keyboard works during startup until the first Windows startup screen appears. No NumLock or such work at the time when I get to the login screen.

  Thanks in advance for one advise you can provide.

  Hello

  A long history on your question... I think the reason for this is why you deleted some registry keys. If you delete something in the registry of Windows, you really know what you're doing. You may damage the entire Windows system!
  So I think that's the reason why the keyboard doesn t more.

  In the manual, I founded the CD-ROM boot option is available with the optical disk option.
  So for me it sounds like that your CD USB drive is not compatible with the laptop

• I have ios 9 on my iphone and my region is USA.  Application of new appears in my Siri suggestions and I can use it from there, but it's not anywhere else on my phone.

  I have ios 9.2.1 on my iphone more than 6 s and my region is USA.  The application of new appears in my Siri suggestions and I can use it from there, but it is not anywhere else on my phone.  I'm afraid if she suggestions I won't be able to use it.  Everyone knows about this problem?

  The News app is on your device. You should check to see where it is. It might be in a folder. Browse your folders to search for, you can do a search is sliding to the right of the homepage, or you can drag down from the center of the homepage to bring up the search. From there, you can do a search of the application, and if you have it in a folder, then the name of this folder will appear to the right of the app.

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ